The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Nano and submicrometric fibers of poly(D,L‐lactide) obtained by solution blow spinning: Process and solution variables
Abstract
Nano and submicrometric fibers of poly(D,L‐lactide) (PDLLA or PLA) were spun from solutions using a solution blow spinning (SBS) apparatus. Fiber morphology and diameter were investigated by scanning electron microscopy as a function of polymer concentration, feed rate, and air pressure. A more systematic understanding of the SBS process parameters was obtained, and a quantitative relationship between these parameters and average fiber diameter was established by design of experiments and response surface methodology. It was observed that polymer concentration played an important role in fiber diameter, which ranges from 70 to 2000 nm, and its distribution. Lower polymer concentration tended to increase the formation of bead‐on‐string structures, whereas smooth fibers were formed at higher concentrations. Fiber diameter tended to increase with polymer concentration and decrease with feed rate. Based on these results, optimal conditions could be obtained for solution‐blow spun fibers. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Wearable electronics and photonics
Tao, X. (2005) · Woodhead Publishing Limited eBooks · doi:10.1533/9781845690441 · Cited by 193
Cited by
A Review of the Fundamental Principles and Applications of Solution Blow Spinning
Daristotle, J. L., Behrens, A. M., Sandler, A. D., & Kofinas, P. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b12994 · Cited by 443
Recent progress and challenges in solution blow spinning
Gao, Y., Zhang, J., Su, Y., Wang, H., Wang, X.-X., Huang, L.-P., Yu, M., Ramakrishna, S., & Long, Y.-Z. (2021) · Materials Horizons · doi:10.1039/d0mh01096k · Cited by 268
Oliveira, J. E., Mattoso, L. H. C., Orts, W. J., & Medeiros, E. S. (2013) · Advances in Materials Science and Engineering · doi:10.1155/2013/409572 · Cited by 242
Self-citationOliveira, J. E., Medeiros, E. S., Cardozo, L., Voll, F., Madureira, E. H., Mattoso, L. H. C., & Assis, O. B. G. (2013) · Materials Science and Engineering: C · doi:10.1016/j.msec.2012.10.032 · Cited by 70
Self-citationAlmeida, C. L., Figueiredo, L. R. F., Melo, J. D. D., & Medeiros, E. S. (2025) · ACS Omega · doi:10.1021/acsomega.5c06418 · Cited by 1
Self-citation
Metadata
- Authors
- Oliveira, J. E., Moraes, E. A., Costa, R. G. F., Afonso, A. S., Mattoso, L. H. C., Orts, W. J., & Medeiros, E. S.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2011-07-12
- Volume
- 122
- Issue
- 5
- Pages
- 3396-3405
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2060086753
- Cited by
- 162
- References
- 2
- FWCI
- 2.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.