The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Characterization of cell viability during bioprinting processes
Abstract
Bioprinting is an emerging technology in the field of tissue engineering and regenerative medicine. The process consists of simultaneous deposition of cells, biomaterial and/or growth factors under pressure through a micro‐scale nozzle. Cell viability can be controlled by varying the parameters like pressure and nozzle diameter. The process itself can be a very useful tool for evaluating an in vitro cell injury model. It is essential to understand the cell responses to process‐induced mechanical disturbances because they alter cell morphology and function. We carried out analysis and quantification of the degree of cell injury induced by bioprinting process. A parametric study with different process parameters was conducted to analyze and quantify cell injury as well as to optimize the parameters for printing viable cells. A phenomenological model was developed correlating the percentage of live, apoptotic and necrotic cells to the process parameters. This study incorporates an analytical formulation to predict the cell viability through the system as a function of the maximum shear stress in the system. The study shows that dispensing pressure has a more significant effect on cell viability than the nozzle diameter. The percentage of live cells is reduced significantly (by 38.75%) when constructs are printed at 40 psi compared to those printed at 5 psi.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Vermes, I., Haanen, C., Steffens-Nakken, H., & Reutellingsperger, C. (1995) · Journal of Immunological Methods · doi:10.1016/0022-1759(95)00072-i · Cited by 5,410
Capturing complex 3D tissue physiology in vitro
Griffith, L. G., & Swartz, M. A. (2006) · Nature Reviews Molecular Cell Biology · doi:10.1038/nrm1858 · Cited by 2,290
Patterning proteins and cells using soft lithography
Kane, R. (1999) · Biomaterials · doi:10.1016/s0142-9612(99)00165-9 · Cited by 1,490
Inkjet printing of viable mammalian cells
Xu, T., Jin, J., Gregory, C., Hickman, J. J., & Boland, T. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.011 · Cited by 1,035
Effect of Pore Size and Void Fraction on Cellular Adhesion, Proliferation, and Matrix Deposition
Zeltinger, J., Sherwood, J. K., Graham, D. A., Müeller, R., & Griffith, L. G. (2001) · Tissue Engineering · doi:10.1089/107632701753213183 · Cited by 794
Chang, R., Nam, J., & Sun, W. (2008) · Tissue Engineering Part A · doi:10.1089/ten.a.2007.0004 · Cited by 549
Self-citationViability and electrophysiology of neural cell structures generated by the inkjet printing method
Xu, T., Gregory, C. A., Molnar, P., Cui, X., Jalota, S., Bhaduri, S. B., & Boland, T. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.048 · Cited by 520
Microfluidics technology for manipulation and analysis of biological cells
Yi, C., Li, C.-W., Ji, S., & Yang, M. (2006) · Analytica Chimica Acta · doi:10.1016/j.aca.2005.12.037 · Cited by 478
Townsend-Nicholson, A., & Jayasinghe, S. N. (2006) · Biomacromolecules · doi:10.1021/bm060649h · Cited by 461
Biological Laser Printing: A Novel Technique for Creating Heterogeneous 3-dimensional Cell Patterns
Barron, J. A., Wu, P., Ladouceur, H. D., & Ringeisen, B. R. (2004) · Biomedical Microdevices · doi:10.1023/b:bmmd.0000031751.67267.9f · Cited by 435
Cell and organ printing 2: Fusion of cell aggregates in three‐dimensional gels
Boland, T., Mironov, V., Gutowska, A., Roth, E. A., & Markwald, R. R. (2003) · The Anatomical Record Part A: Discoveries in Molecular, Cellular, and Evolutionary Biology · doi:10.1002/ar.a.10059 · Cited by 382
Tissue Engineering: The Challenges Ahead
Langer, R. S., & Vacanti, J. P. (1999) · Scientific American · doi:10.1038/scientificamerican0499-86 · Cited by 362
Multi‐nozzle deposition for construction of 3D biopolymer tissue scaffolds
Khalil, S., Nam, J., & Sun, W. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573347 · Cited by 351
Self-citationBader, A., Schilling, T., Teebken, O. E., Brandes, G., Herden, T., Steinhoff, G., & Haverich, A. (1998) · European Journal of Cardio-Thoracic Surgery · doi:10.1016/s1010-7940(98)00171-7 · Cited by 340
Wong, J. Y., Leach, J. B., & Brown, X. Q. (2004) · Surface Science · doi:10.1016/j.susc.2004.06.186 · Cited by 323
Tissue Engineering and Developmental Biology: Going Biomimetic
Ingber, D. E., Mow, V. C., Butler, D., Niklason, L., Huard, J., Mao, J., Yannas, I., Kaplan, D., & Vunjak-Novakovic, G. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.3265 · Cited by 298
Laser Printing of Pluripotent Embryonal Carcinoma Cells
Ringeisen, B. R., Kim, H., Barron, J. A., Krizman, D. B., Chrisey, D. B., Jackman, S., Auyeung, R. Y. C., & Spargo, B. J. (2004) · Tissue Engineering · doi:10.1089/107632704323061843 · Cited by 295
Fabrication of 3D chitosan–hydroxyapatite scaffolds using a robotic dispensing system
Ang, T. H., Sultana, F. S. A., Hutmacher, D. W., Wong, Y. S., Fuh, J. Y. H., Mo, X. M., Loh, H. T., Burdet, E., & Teoh, S. H. (2002) · Materials Science and Engineering: C · doi:10.1016/s0928-4931(02)00010-3 · Cited by 278
Laser-guided direct writing for applications in biotechnology
Odde, D. J., & Renn, M. J. (1999) · Trends in Biotechnology · doi:10.1016/s0167-7799(99)01355-4 · Cited by 278
Landers, R., & Mülhaupt, R. (2000) · Macromolecular Materials and Engineering · doi:10.1002/1439-2054(20001001)282:1<17::aid-mame17>3.0.co;2-8 · Cited by 261
Photo- and electropatterning of hydrogel-encapsulated living cell arrays
Albrecht, D. R., Tsang, V. L., Sah, R. L., & Bhatia, S. N. (2005) · Lab on a Chip · doi:10.1039/b406953f · Cited by 260
Application of laser printing to mammalian cells
Barron, J. A., Ringeisen, B. R., Kim, H., Spargo, B. J., & Chrisey, D. B. (2004) · Thin Solid Films · doi:10.1016/j.tsf.2003.11.161 · Cited by 242
Biopolymer deposition for freeform fabrication of hydrogel tissue constructs
Khalil, S., & Sun, W. (2007) · Materials Science and Engineering: C · doi:10.1016/j.msec.2006.05.023 · Cited by 235
Self-citationLaser Printing of Single Cells: Statistical Analysis, Cell Viability, and Stress
Barron, J. A., Krizman, D. B., & Ringeisen, B. R. (2005) · Annals of Biomedical Engineering · doi:10.1007/s10439-005-8971-x · Cited by 227
Micromechanical control of cell and tissue development: Implications for tissue engineering☆
GHOSH, K., & INGBER, D. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.08.014 · Cited by 212
Wu, P. K., Ringeisen, B. R., Callahan, J., Brooks, M., Bubb, D. M., Wu, H. D., Piqué, A., Spargo, B., McGill, R. A., & Chrisey, D. B. (2001) · Thin Solid Films · doi:10.1016/s0040-6090(01)01347-5 · Cited by 175
Direct patterning of mammalian cells onto porous tissue engineering substrates using agarose stamps
Stevens, M. M., Mayer, M., Anderson, D. G., Weibel, D. B., Whitesides, G. M., & Langer, R. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.05.001 · Cited by 134
Layered manufacturing of tissue engineering scaffolds via multi-nozzle deposition
Yan, Y., Xiong, Z., Hu, Y., et al. (2003) · Materials Letters · doi:10.1016/s0167-577x(02)01339-3 · Cited by 119
Shounan, Y., Feng, X., & O’Connell, P. J. (1998) · Journal of Immunological Methods · doi:10.1016/s0022-1759(98)00090-8 · Cited by 80
Chen, C. Y., Barron, J. A., & Ringeisen, B. R. (2006) · Applied Surface Science · doi:10.1016/j.apsusc.2005.11.088 · Cited by 75
Advances in tissue engineering: Cell printing
Varghese, D., Deshpande, M., Xu, T., Kesari, P., Ohri, S. K., & Boland, T. (2005) · Journal of Thoracic and Cardiovascular Surgery · doi:10.1016/j.jtcvs.2004.06.050 · Cited by 73
Manufacturing and Characterization of 3‐D Hydroxyapatite Bone Tissue Engineering Scaffolds
Chu, T. G., Hollister, S. J., Halloran, J. W., Feinberg, S. E., & Orton, D. G. (2002) · Annals of the New York Academy of Sciences · doi:10.1111/j.1749-6632.2002.tb03061.x · Cited by 55
Deposition and structural formation of 3D alginate tissue scaffolds
Khalil, S., & Sun, W. (2005) · doi:10.17918/etd-664 · Cited by 20
Self-citation3-D Fabrication Technology for Tissue Engineering
Chen, A. A., Tsang, V. L., Albrecht, D. R., & Bhatia, S. N. (2006) · Springer eBooks · doi:10.1007/978-0-387-25844-7_2 · Cited by 16
Cited by
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Bioinks for 3D bioprinting: an overview
Gungor-Ozkerim, P. S., Inci, I., Zhang, Y. S., Khademhosseini, A., & Dokmeci, M. R. (2018) · Biomaterials Science · doi:10.1039/c7bm00765e · Cited by 1,428
Progress in 3D bioprinting technology for tissue/organ regenerative engineering
Matai, I., Kaur, G., Seyedsalehi, A., McClinton, A., & Laurencin, C. T. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2019.119536 · Cited by 1,156
Bioink properties before, during and after 3D bioprinting
Hölzl, K., Lin, S., Tytgat, L., Van Vlierberghe, S., Gu, L., & Ovsianikov, A. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/032002 · Cited by 1,070
Ouyang, L., Yao, R., Zhao, Y., & Sun, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035020 · Cited by 1,045
Self-citation
Metadata
- Authors
- Nair, K., Gandhi, M., Khalil, S., Yan, K. C., Marcolongo, M., Barbee, K., & Sun, W.
- Venue
- Biotechnology Journal
- Publisher
- Wiley
- Published
- 2009-08
- Volume
- 4
- Issue
- 8
- Pages
- 1168-1177
- ISSN
- 1860-6768 (ISSN-L)
- 1860-7314
- OpenAlex
- W1983720999
- Cited by
- 510
- References
- 34
- FWCI
- 4.66
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.