The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
CO2, NOx and SOx removal from flue gas via microalgae cultivation: A critical review
Abstract
Flue gas refers to the gas emitting from the combustion processes, and it contains CO 2, NO x, SO x and other potentially hazardous compounds. Due to the increasing concerns of CO 2 emissions and environmental pollution, the cleaning process of flue gas has attracted much attention. Using microalgae to clean up flue gas via photosynthesis is considered a promising CO 2 mitigation process for flue gas. However, the impurities in the flue gas may inhibit microalgal growth, leading to a lower microalgae‐based CO 2 fixation rate. The inhibition effects of SO x that contribute to the low pH could be alleviated by maintaining a stable pH level, while NO x can be utilized as a nitrogen source to promote microalgae growth when it dissolves and is oxidized in the culture medium. The yielded microalgal biomass from fixing flue gas CO 2 and utilizing NO x and SO x as nutrients would become suitable feedstock to produce biofuels and bio‐based chemicals. In addition to the removal of SO x, NO x and CO 2, using microalgae to remove heavy metals from flue gas is also quite attractive. In conclusion, the use of microalgae for simultaneous removal of CO 2, SO x and NO x from flue gas is an environmentally benign process and represents an ideal platform for CO 2 reutilization.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chisti, Y. (2007) · Biotechnology Advances · doi:10.1016/j.biotechadv.2007.02.001 · Cited by 9,524
Commercial Applications of Microalgae
Spolaore, P., Joannis-Cassan, C., Duran, E., & Isambert, A. (2006) · Journal of Bioscience and Bioengineering · doi:10.1263/jbb.101.87 · Cited by 4,285
Chen, C.-Y., Yeh, K.-L., Aisyah, R., Lee, D.-J., & Chang, J.-S. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2010.06.159 · Cited by 1,860
Self-citationPerspectives on Microalgal CO2-Emission Mitigation Systems—A Review
Ho, S.-H., Chen, C.-Y., Lee, D.-J., & Chang, J.-S. (2011) · Biotechnology Advances · doi:10.1016/j.biotechadv.2010.11.001 · Cited by 580
Kumar, K., Dasgupta, C. N., Nayak, B., Lindblad, P., & Das, D. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2011.01.054 · Cited by 533
Simultaneous flue gas bioremediation and reduction of microalgal biomass production costs
Douskova, I., Doucha, J., Livansky, K., Machat, J., Novak, P., Umysova, D., Zachleder, V., & Vitova, M. (2009) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-008-1811-9 · Cited by 244
Utilization of Simulated Flue Gas for Cultivation of Scenedesmus Dimorphus
Jiang, Y., Zhang, W., Wang, J., Chen, Y., Shen, S., & Liu, T. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2012.10.119 · Cited by 212
Cited by
Towards industrial products from microalgae
Ruiz, J., Olivieri, G., de Vree, J., Bosma, R., Willems, P., Reith, J. H., Eppink, M. H. M., Kleinegris, D. M. M., Wijffels, R. H., & Barbosa, M. J. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01493c · Cited by 661
Minimizing carbon footprint via microalgae as a biological capture
Onyeaka, H., Miri, T., Obileke, K., Hart, A., Anumudu, C., & Al-Sharify, Z. T. (2021) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2021.100007 · Cited by 326
Asghar, U., Rafiq, S., Anwar, A., Iqbal, T., Ahmed, A., Jamil, F., Khurram, M. S., Akbar, M. M., Farooq, A., Shah, N. S., et al. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.106064 · Cited by 286
Microalgal biosorption of heavy metals: A comprehensive bibliometric review
Ubando, A. T., Africa, A. D. M., Maniquiz-Redillas, M. C., Culaba, A. B., Chen, W.-H., & Chang, J.-S. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.123431 · Cited by 257
Self-citationPrasad, R., Gupta, S. K., Shabnam, N., Oliveira, C. Y. B., Nema, A. K., Ansari, F. A., & Bux, F. (2021) · Sustainability · doi:10.3390/su132313061 · Cited by 239
Metadata
- Authors
- Yen, H., Ho, S., Chen, C., & Chang, J.
- Venue
- Biotechnology Journal
- Publisher
- Wiley
- Published
- 2015-04-30
- Volume
- 10
- Issue
- 6
- Pages
- 829-839
- ISSN
- 1860-6768 (ISSN-L)
- 1860-7314
- OpenAlex
- W2017642420
- Cited by
- 193
- References
- 7
- FWCI
- 3.42
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.