The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Effect of the applied organic load rate on biodegradable polymer production by mixed microbial cultures in a sequencing batch reactor
Abstract
This article studies the operation of a new process for the production of biopolymers (polyhydroxyalkanoates, PHAs) at different applied organic load rates (OLRs). The process is based on the aerobic enrichment of activated sludge to obtain mixed cultures able to store PHAs at high rates and yields. A mixture of acetic, lactic, and propionic acids at different concentrations (in the range 8.5–31.25 gCOD/L) was fed every 2 h in a sequencing batch reactor (SBR). The resulting applied OLR was in the range 8.5–31.25 gCOD/L/day. Even though, as expected, the increase in the OLR caused an increase in biomass concentration (up to about 8.7 g COD/L), it also caused a relevant decrease of maximal polymer production rate. This decrease in polymer production rate was related to the different extent of “feast and famine” conditions, as function of the applied OLR and of the start‐up conditions. As a consequence the best performance of the process was obtained at an intermediate OLR (20 gCOD/L/day) where both biomass productivity and PHA storage were high enough. However, at this high OLR the process was unstable and sudden decrease of performance was also observed. The sludge characterized by the highest PHA storage response was investigated by 16S rDNA clone library. The clone library contained sequences mostly from PHA producers (e.g., Alcaligenes and Comamonas genera); however many genera and among them, one of the dominant (Thauera), were never described before in relation to PHA storage response. © 2005 Wiley Periodicals, Inc.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Production of Polyhydroxyalkanoates by Mixed Microbial Cultures
Reis, M. A. M., Serafim, L. S., Lemos, P. C., Ramos, A. M., Aguiar, F. R., & Van Loosdrecht, M. C. M. (2003) · Bioprocess and Biosystems Engineering · doi:10.1007/s00449-003-0322-4 · Cited by 301
Cited by
Recent Advances and Challenges towards Sustainable Polyhydroxyalkanoate (PHA) Production
Kourmentza, C., Plácido, J., Venetsaneas, N., Burniol-Figols, A., Varrone, C., Gavala, H. N., & Reis, M. A. M. (2017) · Bioengineering · doi:10.3390/bioengineering4020055 · Cited by 779
Strategies for PHA production by mixed cultures and renewable waste materials
Serafim, L. S., Lemos, P. C., Albuquerque, M. G. E., & Reis, M. A. M. (2008) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-008-1757-y · Cited by 352
Albuquerque, M. G. E., Torres, C. A. V., & Reis, M. A. M. (2010) · Water Research · doi:10.1016/j.watres.2010.03.021 · Cited by 334
Dias, J. M. L., Lemos, P. C., Serafim, L. S., Oliveira, C., Eiroa, M., Albuquerque, M. G. E., Ramos, A. M., Oliveira, R., & Reis, M. A. M. (2006) · Macromolecular Bioscience · doi:10.1002/mabi.200600112 · Cited by 308
Biotechnological Production of Polyhydroxyalkanoates: A Review on Trends and Latest Developments
Singh Saharan, B., Grewal, A., & Kumar, P. (2014) · Chinese Journal of Biology · doi:10.1155/2014/802984 · Cited by 144
Metadata
- Authors
- Dionisi, D., Majone, M., Vallini, G., Di Gregorio, S., & Beccari, M.
- Venue
- Biotechnology and Bioengineering
- Publisher
- Wiley
- Published
- 2005-12-12
- Volume
- 93
- Issue
- 1
- Pages
- 76-88
- ISSN
- 0006-3592 (ISSN-L)
- 1097-0290
- OpenAlex
- W1988061332
- Cited by
- 189
- References
- 1
- FWCI
- 1.14
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of the applied organic load rate on biodegradable polymer production by mixed microbial cultures in a sequencing batch reactor. https://app.cochat.ai/papers/10.1002/bit.20683
- The paper
- Dionisi, D., Majone, M., Vallini, G., Di Gregorio, S., & Beccari, M. (2006). Effect of the applied organic load rate on biodegradable polymer production by mixed microbial cultures in a sequencing batch reactor. Biotechnology and Bioengineering. https://doi.org/10.1002/bit.20683
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.