The DOI matches its Crossref record.
Influence of cultivation conditions on mechanical and morphological properties of bacterial cellulose tubes
Abstract
Bacterial cellulose (BC) was deposited in tubular form by fermenting Acetobacter xylinum on top of silicone tubes as an oxygenated support and by blowing different concentrations of oxygen, that is, 21% (air), 35%, 50%, and 100%. Mechanical properties such as burst pressure and tensile properties were evaluated for all tubes. The burst pressure of the tubes increased with an increase in oxygen ratio and reached a top value of 880 mmHg at 100% oxygen. The Young's modulus was approximately 5 MPa for all tubes, irrespective of the oxygen ratio. The elongation to break decreased from 30% to 10–20% when the oxygen ratio was increased. The morphology of the tubes was characterized by Scanning Electron Microscopy (SEM). All tubes had an even inner side and a more porous outer side. The cross section indicated that the tubes are composed of layers and that the amount of layers and the yield of cellulose increased with an increase in oxygen ratio. We propose that an internal vessel wall with high density is required for the tube to sustain a certain pressure. An increase in wall thickness by an increase in oxygen ratio might explain the increasing burst pressure with increasing oxygen ratio. The fermentation method used renders it possible to produce branched tubes, tubes with unlimited length and inner diameters. Endothelial cells (ECs) were grown onto the lumen of the tubes. The cells formed a confluent layer after 7 days. The tubes potential as a vascular graft is currently under investigation in a large animal model at the Centre of Vascular Engineering, Sahlgrenska University Hospital, Gothenburg. Biotechnol. Bioeng. 2007;97: 425–434. © 2006 Wiley Periodicals, Inc.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Nanocellulose, a Versatile Green Platform: From Biosources to Materials and Their Applications
Thomas, B., Raj, M. C., B, A. K., H, R. M., Joy, J., Moores, A., Drisko, G. L., & Sanchez, C. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00627 · Cited by 1,714
Klemm, D., Cranston, E. D., Fischer, D., Gama, M., Kedzior, S. A., Kralisch, D., Kramer, F., Kondo, T., Lindström, T., Nietzsche, S., et al. (2018) · Materials Today · doi:10.1016/j.mattod.2018.02.001 · Cited by 936
Wang, J., Tavakoli, J., & Tang, Y. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.05.008 · Cited by 776
Recent advances in bacterial cellulose
Huang, Y., Zhu, C., Yang, J., Nie, Y., Chen, C., & Sun, D. (2014) · Cellulose · doi:10.1007/s10570-013-0088-z · Cited by 589
Adhesion and Surface Issues in Cellulose and Nanocellulose
Gardner, D. J., Oporto, G. S., Mills, R., & Samir, M. A. S. A. (2008) · Journal of Adhesion Science and Technology · doi:10.1163/156856108x295509 · Cited by 525
Bacterial cellulose-based materials and medical devices: current state and perspectives
Petersen, N., & Gatenholm, P. (2011) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-011-3432-y · Cited by 515
Self-citationBacterial Cellulose: Production, Modification and Perspectives in Biomedical Applications
Gorgieva, S., & Trček, J. (2019) · Nanomaterials · doi:10.3390/nano9101352 · Cited by 497
A critical review of all-cellulose composites
Huber, T., Müssig, J., Curnow, O., Pang, S., Bickerton, S., & Staiger, M. P. (2012) · Journal of Materials Science · doi:10.1007/s10853-011-5774-3 · Cited by 451
Microporous bacterial cellulose as a potential scaffold for bone regeneration
Zaborowska, M., Bodin, A., Bäckdahl, H., Popp, J., Goldstein, A., & Gatenholm, P. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.01.004 · Cited by 381
Self-citationApplications of bacterial cellulose and its composites in biomedicine
Rajwade, J. M., Paknikar, K. M., & Kumbhar, J. V. (2015) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-015-6426-3 · Cited by 369
Abeer, M. M., Mohd Amin, M. C. I., & Martin, C. (2014) · Journal of Pharmacy and Pharmacology · doi:10.1111/jphp.12234 · Cited by 368
Bacterial Nanocellulose as a Renewable Material for Biomedical Applications
Gatenholm, P., & Klemm, D. (2010) · MRS Bulletin · doi:10.1557/mrs2010.653 · Cited by 357
Self-citationProduction and Status of Bacterial Cellulose in Biomedical Engineering
Moniri, M., Boroumand Moghaddam, A., Azizi, S., Abdul Rahim, R., Bin Ariff, A., Zuhainis Saad, W., Navaderi, M., & Mohamad, R. (2017) · Nanomaterials · doi:10.3390/nano7090257 · Cited by 319
Recent advances in nanocellulose processing, functionalization and applications: a review
Thakur, V., Guleria, A., Kumar, S., Sharma, S., & Singh, K. (2021) · Materials Advances · doi:10.1039/d1ma00049g · Cited by 302
Urbina, L., Corcuera, M. Á., Gabilondo, N., Eceiza, A., & Retegi, A. (2021) · Cellulose · doi:10.1007/s10570-021-04020-4 · Cited by 201
Metadata
- Authors
- Bodin, A., Bäckdahl, H., Fink, H., Gustafsson, L., Risberg, B., & Gatenholm, P.
- Venue
- Biotechnology and Bioengineering
- Publisher
- Wiley
- Published
- 2006-12-29
- Volume
- 97
- Issue
- 2
- Pages
- 425-434
- ISSN
- 0006-3592 (ISSN-L)
- 1097-0290
- OpenAlex
- W2149110472
- Cited by
- 200
- References
- 0
- FWCI
- 2.27
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.