The DOI matches its Crossref record.
Power production in MFCs inoculated with Shewanella oneidensis MR‐1 or mixed cultures
Abstract
Power densities and oxidation–reduction potentials (ORPs) of MFCs containing a pure culture of Shewanella oneidensis MR‐1 were compared to mixed cultures (wastewater inoculum) in cube shaped, 1‐, 2‐, and 3‐bottle batch‐fed MFC reactor configurations. The reactor architecture influenced the relative power produced by the different inocula, with the mixed culture generating 68–480% more power than MR‐1 in each MFC configuration. The mixed culture produced the maximum power density of 858 ± 9 mW m−2 in the cubic MFC, while MR‐1 produced 148 ± 20 mW m−2. The higher power by the mixed culture was primarily a result of lower internal resistances than those produced by the pure culture. Power was a direct function of ohmic resistance for the mixed culture, but not for strain MR‐1. ORP of the anode compartment varied with reactor configuration and inoculum, and it was always negative during maximum power production but it did not vary in proportion to power output. The ORP varied primarily at the end of the cycle when substrate was depleted, with a change from a reductive environment during maximum power production (approximately −175 mV for mixed and approximately −210 mV for MR‐1 in cubic MFCs), to an oxidative environment at the end of the batch cycle (∼250 mV for mixed and ∼300 mV for MR‐1). Mixed cultures produced more power than MR‐1 MFCs even though their redox potential was less negative. These results demonstrate that differences between power densities produced by pure and mixed cultures depend on the MFC architecture. Biotechnol. Bioeng. 2010; 105: 489–498. © 2009 Wiley Periodicals, Inc.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Recent advancements in bioremediation of dye: Current status and challenges
Vikrant, K., Giri, B. S., Raza, N., Roy, K., Kim, K.-H., Rai, B. N., & Singh, R. S. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.01.029 · Cited by 601
Humic substances as fully regenerable electron acceptors in recurrently anoxic environments
Klüpfel, L., Piepenbrock, A., Kappler, A., & Sander, M. (2014) · Nature Geoscience · doi:10.1038/ngeo2084 · Cited by 590
Yong, Y.-C., Dong, X.-C., Chan-Park, M. B., Song, H., & Chen, P. (2012) · ACS Nano · doi:10.1021/nn204656d · Cited by 565
Microbial fuel cell (MFC) power performance improvement through enhanced microbial electrogenicity
Li, M., Zhou, M., Tian, X., Tan, C., McDaniel, C. T., Hassett, D. J., & Gu, T. (2018) · Biotechnology Advances · doi:10.1016/j.biotechadv.2018.04.010 · Cited by 362
Kiely, P. D., Cusick, R., Call, D. F., Selembo, P. A., Regan, J. M., & Logan, B. E. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2010.05.019 · Cited by 287
Self-citationMcCormick, A. J., Bombelli, P., Scott, A. M., Philips, A. J., Smith, A. G., Fisher, A. C., & Howe, C. J. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01965a · Cited by 266
Bioremediation of dyes from textile and dye manufacturing industry effluent
Khan, R., Patel, V., & Khan, Z. (2020) · Abatement of Environmental Pollutants · doi:10.1016/b978-0-12-818095-2.00005-9 · Cited by 25
Metadata
- Authors
- Watson, V. J., & Logan, B. E.
- Venue
- Biotechnology and Bioengineering
- Publisher
- Wiley
- Published
- 2009-11-12
- Volume
- 105
- Issue
- 3
- Pages
- 489-498
- ISSN
- 0006-3592 (ISSN-L)
- 1097-0290
- OpenAlex
- W1973376162
- Cited by
- 159
- References
- 0
- FWCI
- 7.67
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.