The DOI matches its Crossref record; 68 of the 68 references it cites were found in a registry or an index.
Perovskite as a Cathode Material: A Review of its Role in Solid‐Oxide Fuel Cell Technology
Abstract
Solid oxide fuel cells (SOFCs) are characterized by low pollution, and are therefore the best alternative both for distributed energy sources and large‐scale integration. Fuel flexibility, including hydrocarbons, is the main advantage of SOFCs. For the successful introduction of SOFC technology to the market, reduced temperature operation at 600–800 °C is an essential factor. One of the important issues for the reduced temperature operation is to get rid of stability issues while maintaining a certain level of performance. Therefore, the development of alternative materials such as perovskite cathodes is essential to create not only practically acceptable performance, but also to ensure the highly reliable and stable operation of the resulting SOFCs. This review provides a critical and comprehensive survey on the perovskite materials for SOFC cathodes and suggests effective and stable alternatives for the realiable operation of SOFCs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Materials for fuel-cell technologies
Steele, B. C. H., & Heinzel, A. (2001) · Nature · doi:10.1038/35104620 · Cited by 7,772
The emergence of perovskite solar cells
Green, M. A., Ho-Baillie, A., & Snaith, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.134 · Cited by 7,432
Ni, M., Leung, M. K. H., Leung, D. Y. C., & Sumathy, K. (2007) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2005.01.009 · Cited by 4,156
Recent progress in alkaline water electrolysis for hydrogen production and applications
Zeng, K., & Zhang, D. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.11.002 · Cited by 3,611
An overview of hydrogen production technologies
Holladay, J. D., Hu, J., King, D. L., & Wang, Y. (2009) · Catalysis Today · doi:10.1016/j.cattod.2008.08.039 · Cited by 3,447
A high-performance cathode for the next generation of solid-oxide fuel cells
Shao, Z., & Haile, S. M. (2004) · Nature · doi:10.1038/nature02863 · Cited by 3,158
Lowering the Temperature of Solid Oxide Fuel Cells
Wachsman, E. D., & Lee, K. T. (2011) · Science · doi:10.1126/science.1204090 · Cited by 2,554
Factors Governing Oxygen Reduction in Solid Oxide Fuel Cell Cathodes
Adler, S. B. (2004) · Chemical Reviews · doi:10.1021/cr020724o · Cited by 2,316
Impedance spectroscopy theory, experiment, and applications
(2005) · Choice Reviews Online · doi:10.5860/choice.43-0327 · Cited by 2,299
Appraisal of Ce1−yGdyO2−y/2 electrolytes for IT-SOFC operation at 500°C
Steele, B. C. H. (2000) · Solid State Ionics · doi:10.1016/s0167-2738(99)00319-7 · Cited by 2,078
Advances in solid oxide fuel cell technology
Singhal, S. C. (2000) · Solid State Ionics · doi:10.1016/s0167-2738(00)00452-5 · Cited by 1,475
Potential importance of hydrogen as a future solution to environmental and transportation problems
Balat, M. (2008) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2008.05.047 · Cited by 1,418
Microbial Electrolysis Cells for High Yield Hydrogen Gas Production from Organic Matter
Logan, B. E., Call, D., Cheng, S., Hamelers, H. V. M., Sleutels, T. H. J. A., Jeremiasse, A. W., & Rozendal, R. A. (2008) · Environmental Science & Technology · doi:10.1021/es801553z · Cited by 1,368
The perovskite structure—a review of its role in ceramic science and technology
Bhalla, A. S., Guo, R., & Roy, R. (2000) · Materials Research Innovations · doi:10.1007/s100190000062 · Cited by 1,365
A review on reforming bio-ethanol for hydrogen production
Ni, M., Leung, D. Y. C., & Leung, M. K. H. (2007) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2007.04.038 · Cited by 1,206
Chen, Z., Jaramillo, T. F., Deutsch, T. G., Kleiman-Shwarsctein, A., Forman, A. J., Gaillard, N., Garland, R., Takanabe, K., Heske, C., Sunkara, M., et al. (2010) · Journal of Materials Research · doi:10.1557/jmr.2010.0020 · Cited by 1,203
Formability of ABX 3 (X = F, Cl, Br, I) halide perovskites
Li, C., Lu, X., Ding, W., Feng, L., Gao, Y., & Guo, Z. (2008) · Acta Crystallographica Section B Structural Science · doi:10.1107/s0108768108032734 · Cited by 1,161
Recent advances in high temperature electrolysis using solid oxide fuel cells: A review
Laguna-Bercero, M. A. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.12.019 · Cited by 1,156
Investigation of the permeation behavior and stability of a Ba0.5Sr0.5Co0.8Fe0.2O3−δ oxygen membrane
Shao, Z. (2000) · Journal of Membrane Science · doi:10.1016/s0376-7388(00)00337-9 · Cited by 1,043
Hydrogen production by methane decomposition: A review
Abbas, H. F., & Wan Daud, W. M. A. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.11.036 · Cited by 959
Thermochemical Biomass Gasification: A Review of the Current Status of the Technology
Kumar, A., Jones, D. D., & Hanna, M. A. (2009) · Energies · doi:10.3390/en20300556 · Cited by 888
Comparison of environmental and economic aspects of various hydrogen production methods
Kothari, R., Buddhi, D., & Sawhney, R. L. (2008) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2006.07.012 · Cited by 821
Structure and electrical properties of La1−xSrxCo1−yFeyO3. Part 1. The system La0.8Sr0.2Co1−yFeyO3
Tai, L. (1995) · Solid State Ionics · doi:10.1016/0167-2738(94)00244-m · Cited by 802
Cation ordering in perovskites
King, G., & Woodward, P. M. (2010) · Journal of Materials Chemistry · doi:10.1039/b926757c · Cited by 778
Sengodan, S., Choi, S., Jun, A., Shin, T. H., Ju, Y.-W., Jeong, H. Y., Shin, J., Irvine, J. T. S., & Kim, G. (2015) · Nature Materials · doi:10.1038/nmat4166 · Cited by 746
Self-citationJiang, S. P. (2008) · Journal of Materials Science · doi:10.1007/s10853-008-2966-6 · Cited by 721
Biomass-based hydrogen production: A review and analysis
Kalinci, Y., Hepbasli, A., & Dincer, I. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.08.078 · Cited by 590
Kim, G., Wang, S., Jacobson, A. J., Reimus, L., Brodersen, P., & Mims, C. A. (2007) · Journal of Materials Chemistry · doi:10.1039/b618345j · Cited by 588
Self-citationMaignan, A., Martin, C., Pelloquin, D., Nguyen, N., & Raveau, B. (1999) · Journal of Solid State Chemistry · doi:10.1006/jssc.1998.7934 · Cited by 581
Advances in fermentative biohydrogen production: the way forward?
Hallenbeck, P. C., & Ghosh, D. (2009) · Trends in Biotechnology · doi:10.1016/j.tibtech.2009.02.004 · Cited by 579
Ion transport membrane technology for oxygen separation and syngas production
Dyer, P. N. (2000) · Solid State Ionics · doi:10.1016/s0167-2738(00)00710-4 · Cited by 566
Hydrogen and synthetic fuel production from renewable energy sources
Jensen, S. H., Larsen, P. H., & Mogensen, M. (2007) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2007.04.042 · Cited by 529
Perovskite-type oxides as oxygen electrodes for high temperature oxide fuel cells
Yamamoto, O. (1987) · Solid State Ionics · doi:10.1016/0167-2738(87)90039-7 · Cited by 514
A review on solar-hydrogen/fuel cell hybrid energy systems for stationary applications
Yilanci, A., Dincer, I., & Ozturk, H. K. (2009) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2008.07.004 · Cited by 506
Electrolysis of carbon dioxide in Solid Oxide Electrolysis Cells
Ebbesen, S. D., & Mogensen, M. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.02.093 · Cited by 480
Hydrogen production from renewable sources: biomass and photocatalytic opportunities
Navarro, R. M., Sánchez-Sánchez, M. C., Alvarez-Galvan, M. C., Valle, F. D., & Fierro, J. L. G. (2009) · Energy Environ. Sci. · doi:10.1039/b808138g · Cited by 444
Political, economic and environmental impacts of biomass-based hydrogen
Balat, M., & Balat, M. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.02.067 · Cited by 422
Hydrogen production by fermentative consortia
Valdez-Vazquez, I., & Poggi-Varaldo, H. M. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2008.03.003 · Cited by 392
Choi, S., Yoo, S., Kim, J., Park, S., Jun, A., Sengodan, S., Kim, J., Shin, J., Jeong, H. Y., Choi, Y., et al. (2013) · Scientific Reports · doi:10.1038/srep02426 · Cited by 374
Self-citationChen, D., Ran, R., Zhang, K., Wang, J., & Shao, Z. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.11.045 · Cited by 358
Chapter 10 Dense ceramic membranes for oxygen separation
Bouwmeester, H. J. M., & Burggraaf, A. J. (1996) · Membrane Science and Technology · doi:10.1016/s0927-5193(96)80013-1 · Cited by 341
Rational SOFC material design: new advances and tools
Liu, M., Lynch, M. E., Blinn, K., Alamgir, F. M., & Choi, Y. (2011) · Materials Today · doi:10.1016/s1369-7021(11)70279-6 · Cited by 327
Role of solid oxidefuel cells in a balanced energy strategy
Wachsman, E. D., Marlowe, C. A., & Lee, K. T. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02445k · Cited by 307
A-site cation ordering in AA′BB′O6 perovskites
Knapp, M. C., & Woodward, P. M. (2006) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2006.01.005 · Cited by 279
Hammouche, A., Siebert, E., & Hammou, A. (1989) · Materials Research Bulletin · doi:10.1016/0025-5408(89)90223-7 · Cited by 266
AMOW, G., DAVIDSON, I., & SKINNER, S. (2006) · Solid State Ionics · doi:10.1016/j.ssi.2006.05.005 · Cited by 248
Wei, B., Lü, Z., Huang, X., Miao, J., Sha, X., Xin, X., & Su, W. (2006) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2005.06.047 · Cited by 240
Yoo, S., Jun, A., Ju, Y., Odkhuu, D., Hyodo, J., Jeong, H. Y., Park, N., Shin, J., Ishihara, T., & Kim, G. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201407006 · Cited by 205
Self-citationElder, R., & Allen, R. (2009) · Progress in Nuclear Energy · doi:10.1016/j.pnucene.2008.11.001 · Cited by 187
Progress in understanding SOFC electrodes
Mogensen, M. B., Jensen, K. V., Jørgensen, M. J., & Primdahl, S. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00269-2 · Cited by 181
Silica Segregation in the Ni∕YSZ Electrode
Hauch, A., Jensen, S. H., Bilde-So̸rensen, J. B., & Mogensen, M. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2733861 · Cited by 169
Kim, Y. N., Kim, J., & Manthiram, A. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.03.100 · Cited by 159
Self-citationOxygen production on Mars using solid oxide electrolysis
Sridhar, K. (1997) · Solid State Ionics · doi:10.1016/s0167-2738(96)00513-9 · Cited by 142
Recent directions of world hydrogen production
Momirlan, M., & Veziroglu, T. N. (1999) · Renewable and Sustainable Energy Reviews · doi:10.1016/s1364-0321(98)00017-3 · Cited by 135
Intermediate temperature solid oxide electrolysis cell using LaGaO3 based perovskite electrolyte
Ishihara, T., Jirathiwathanakul, N., & Zhong, H. (2010) · Energy & Environmental Science · doi:10.1039/b915927d · Cited by 134
Materials for separation membranes in hydrogen and oxygen production and future power generation
Phair, J. W., & Badwal, S. P. S. (2006) · Science and Technology of Advanced Materials · doi:10.1016/j.stam.2006.11.005 · Cited by 125
Corbel, G., Mestiri, S., & Lacorre, P. (2005) · Solid State Sciences · doi:10.1016/j.solidstatesciences.2005.05.007 · Cited by 115
Production of syngas plus oxygen from CO2 in a gas-diffusion electrode-based electrolytic cell
Yamamoto, T. (2002) · Electrochimica Acta · doi:10.1016/s0013-4686(02)00253-0 · Cited by 91
Jun, A., Kim, J., Shin, J., & Kim, G. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.09.048 · Cited by 86
Self-citationKim, J., Choi, S., Jun, A., Jeong, H. Y., Shin, J., & Kim, G. (2014) · ChemSusChem · doi:10.1002/cssc.201301401 · Cited by 86
Self-citationLiang, F., Chen, J., Cheng, J., Jiang, S. P., He, T., Pu, J., & Li, J. (2007) · Electrochemistry Communications · doi:10.1016/j.elecom.2007.10.016 · Cited by 75
TAO, G. (2004) · Solid State Ionics · doi:10.1016/j.ssi.2004.02.075 · Cited by 72
Jun, A., Yoo, S., Ju, Y., Hyodo, J., Choi, S., Jeong, H. Y., Shin, J., Ishihara, T., Lim, T., & Kim, G. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02158h · Cited by 58
Self-citationLee, K. T., & Manthiram, A. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1828243 · Cited by 57
Li, J., Yoon, H., Oh, T., et al. (2009) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2009.08.015 · Cited by 49
Electrochemical properties of B-site Ni doped layered perovskite cathodes for IT-SOFCs
Jun, A., Lim, T., Shin, J., & Kim, G. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.06.136 · Cited by 30
Self-citationCation ordering in distorted perovskites (MLa)(MgTe)O 6 , M = Na, K
López, M. L., Veiga, M. L., & Pico, C. (1994) · Journal of Materials Chemistry · doi:10.1039/jm9940400547 · Cited by 29
Yoo, S., Kim, J., Song, S. Y., Lee, D. W., Shin, J., Ok, K. M., & Kim, G. (2014) · RSC Advances · doi:10.1039/c4ra02061h · Cited by 28
Self-citation
Cited by
Sunarso, J., Hashim, S. S., Zhu, N., & Zhou, W. (2017) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2017.03.003 · Cited by 432
Direct ammonia solid-oxide fuel cells: A review of progress and prospects
Rathore, S. S., Biswas, S., Fini, D., Kulkarni, A. P., & Giddey, S. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.08.092 · Cited by 259
Park, J., Lim, Y., Kong, S., Lee, H., & Kim, Y.-B. (2019) · Coatings · doi:10.3390/coatings9060372 · Cited by 9
Metadata
- Authors
- Jun, A., Kim, J., Shin, J., & Kim, G.
- Venue
- ChemElectroChem
- Publisher
- Wiley
- Published
- 2016-01-05
- Volume
- 3
- Issue
- 4
- Pages
- 511-530
- ISSN
- 2196-0216 (ISSN-L)
- OpenAlex
- W2237033896
- Cited by
- 266
- References
- 68
- FWCI
- 7.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.