CoChat

The Effect of pH and Biogenic Ligands on the Weathering of Chrysotile Asbestos: The Pivotal Role of Tetrahedral Fe in Dissolution Kinetics and Radical Formation

Open access

The DOI matches its Crossref record; 78 of the 79 references it cites were found in a registry or an index; 5 of the 44 sources its claims cite were checked for support.

Abstract

Chrysotile asbestos is a soil pollutant in many countries. It is a carcinogenic mineral, partly due to its surface chemistry. In chrysotile, Fe II and Fe III substitute Mg octahedra (Fe[6]), and Fe III substitutes Si tetrahedra (Fe[4]). Fe on fiber surfaces can generate hydroxyl radicals (HO.) in Fenton reactions, which damage biomolecules. To better understand chrysotile weathering in soils, net Mg and Si dissolution rates over the pH range 3.0–11.5 were determined in the presence and absence of biogenic ligands. Also, HO. generation and Fe bulk speciation of pristine and weathered fibers were examined by EPR and Mössbauer spectroscopy. Dissolution rates were increased by ligands and inversely related to pH with complete inhibition at cement pH (11.5). Surface‐exposed Mg layers readily dissolved at low pH, but only after days at neutral pH. On longer timescales, the slow dissolution of Si layers became rate‐determining. In the absence of ligands, Fe[6] precipitated as Fenton‐inactive Fe phases, whereas Fe[4] (7 % of bulk Fe) remained redox‐active throughout two‐week experiments and at pH 7.5 generated 50±10 % of the HO. yield of Fe[6] at pristine fiber surfaces. Ligand‐promoted dissolution of Fe[4] (and potentially Al[4]) labilized exposed Si layers. This increased Si and Mg dissolution rates and lowered HO. generation to near‐background level. It is concluded that Fe[4] surface species control long‐term HO. generation and dissolution rates of chrysotile at natural soil pH.

Overview

CoChat Summary

TL;DR

In batch weathering experiments over pH 3.0–11.5, biogenic ligands increased chrysotile Mg/Si dissolution and lowered hydroxyl-radical yield, with tetrahedral FeIII (FeIII[4]) controlling long-term Si dissolution and Fenton activity at natural soil pH. FeIII[4] comprised 7% of bulk Fe yet at pH 7.5 produced 50±10% of the HO. yield of Fe[6] at pristine fiber surfaces.

Key findings

  • Net Mg and Si dissolution rates were inversely related to pH and generally increased in the presence of ligands; at cement pH 11.5, dissolution was largely inhibited, with Si mobilized only in the HBED treatment.
  • FeIII[4] represented 7% of bulk Fe in chrysotile; at pH 7.5, weathered fibers generated 50±10% of the HO. yield of Fe[6] at pristine fiber surfaces, while Fe[6] precipitated as Fenton-inactive Fe phases within hours.
  • Ligand-promoted dissolution of FeIII[4] (and potentially AlIII[4]) labilized exposed Si layers, increasing Si and Mg dissolution rates and lowering HO. generation to near background; DFOB reduced HO. yield to 9% at pH 7.5 and 17% at pH 8.5, and HBED reduced it to 22% at pH 11.5.
  • Mössbauer analysis of pristine Shijiazhuang chrysotile assigned 38% of chrysotile Fe to FeII[6], 55% to FeIII[6], and 7% to FeIII[4]; blank weathering at pH 3.0 produced a ferrihydrite fraction corresponding to about 6% of bulk Fe, whereas DFOB-treated fibers showed no secondary Fe-bearing phases.

Methods

  • Batch dissolution experiments used 1 g L−1 Shijiazhuang chrysotile at pH 3.0, 4.5, 6.0, 7.5, 8.5, and 11.5 in 50 mmol L−1 non-metal-complexing buffers, with 1 mmol L−1 citrate, oxalate, DFOB, HEDTA, or HBED (HBED only at pH 11.5), incubated in the dark at 20±2 °C for up to 336 h in duplicate; Mg, Si, Fe, and Al were measured by ICP-OES.
  • Solid and solution characterization included XRD Rietveld refinement, BET surface area, fusion digestion and NAA for bulk elements, PHREEQC/SIT equilibrium modeling, alkaline extraction of amorphous silica, and 57Fe Mössbauer spectroscopy of pristine and weathered fibers.
  • HO. generation was quantified by EPR spin trapping with DMPO/H2O2 at pH 7.4, in quadruplicate, and expressed as peak-to-peak intensity relative to pristine reference fibers.

Limitations

  • Stated in the paper: magnetite contamination can affect total bulk Fe measurements by fusion digestion and NAA; chlorite-associated Fe may interfere with dissolution experiments and Mössbauer analysis; the authors assumed magnetite contributions to HO. yield and Fe dissolution were negligible after preliminary tests.
  • Stated in the paper: the pH dependence of net Si dissolution rates could not be unambiguously attributed to Fe mobilization from the Si sheet, because talc also shows increasing dissolution rates with decreasing pH; different ligand effects on incongruent dissolution could not be interpreted from the observations.
  • Evident from the text: the findings come from one chrysotile source with several mineral impurities and from two-week batch experiments, so extrapolation to field soils or in vivo conditions is not directly demonstrated.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1002/chem.201804319

Cites

78 of 78 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1 Mg and Si dissolution from 1 g L−1 chrysotile asbestos in blank and 1 mmol L−1 ligand treatments buffered at pH 3.0, 4.5, 6.0, 7.5, 8.5, and 11.5. a1) Mobilized Mg concentrations as a function of time in the presence of 1 mmol L−1 DFOB. Slopes of the first‐stage Mg dissolution (0.5–8 h) can be well distinguished from slopes of the second stage (24–336 h). a2) Mobilized Si concentrations from fibers as a function of time in the presence of 1 mmol L−1 DFOB. No dissolution stages were distinguished. In both a1) and a2), the percentage of total bulk dissolution is indicated on the secondary y axis. Error bars indicate standard deviations (n=2). Mobilized Mg and Si concentrations as a function of time for all other treatments can be found in Figure S2 of the Supporting Information). b) Si dissolution rates (regression from 0.5 to 336 h). c) Mg dissolution rates calculated for the second stage (regression from 24 to 336 h). Symbols without color filling indicate rates for treatments in which the outermost Mg layer had not completely dissolved after 24 h. Rates of treatments with R 2<0.5 are not reported. Data included in b) and c) are listed in Table S2 of the Supporting Information. Dissolution rates for blank treatments reported by Bales and Morgan,19 Rozalen et al.,19 and Thom et al.19 are included for comparison in b) and c). Since the pH in the study by Rozalen et al.19 drifted during incubation, the calculated rates were plotted on the initial pH value of the incubation solutions.
Figure 1 Mg and Si dissolution from 1 g L−1 chrysotile asbestos in blank and 1 mmol L−1 ligand treatments buffered at pH 3.0, 4.5, 6.0, 7.5, 8.5, and 11.5. a1) Mobilized Mg concentrations as a function of time in the presence of 1 mmol L−1 DFOB. Slopes of the first‐stage Mg dissolution (0.5–8 h) can be well distinguished from slopes of the second stage (24–336 h). a2) Mobilized Si concentrations from fibers as a function of time in the presence of 1 mmol L−1 DFOB. No dissolution stages were distinguished. In both a1) and a2), the percentage of total bulk dissolution is indicated on the secondary y axis. Error bars indicate standard deviations (n=2). Mobilized Mg and Si concentrations as a function of time for all other treatments can be found in Figure S2 of the Supporting Information). b) Si dissolution rates (regression from 0.5 to 336 h). c) Mg dissolution rates calculated for the second stage (regression from 24 to 336 h). Symbols without color filling indicate rates for treatments in which the outermost Mg layer had not completely dissolved after 24 h. Rates of treatments with R 2<0.5 are not reported. Data included in b) and c) are listed in Table S2 of the Supporting Information. Dissolution rates for blank treatments reported by Bales and Morgan,19 Rozalen et al.,19 and Thom et al.19 are included for comparison in b) and c). Since the pH in the study by Rozalen et al.19 drifted during incubation, the calculated rates were plotted on the initial pH value of the incubation solutions.CC BY-NC-ND · PubMed Central
Figure 2 a) Ratios of the Mg and Si dissolution rates of chrysotile shown in Figure 1. The ratio of 1.5 (dashed red line) represents the stoichiometric Mg/Si ratio of chrysotile and hence indicates congruent dissolution. Congruent dissolution was observed in most treatments at pH 4.5 and 6.0. For oxalate, no data point for pH 7.5 was included, because the Si dissolution rate could not be determined at this pH. b) Mobilized Si concentrations extracted in a 0.1 mol L−1 NaOH solution from fibers that had been incubated for 336 h at pH 3.0, 4.5, 6.0, and 7.5. Error bars indicate standard deviations (n=2).
Figure 2 a) Ratios of the Mg and Si dissolution rates of chrysotile shown in Figure 1. The ratio of 1.5 (dashed red line) represents the stoichiometric Mg/Si ratio of chrysotile and hence indicates congruent dissolution. Congruent dissolution was observed in most treatments at pH 4.5 and 6.0. For oxalate, no data point for pH 7.5 was included, because the Si dissolution rate could not be determined at this pH. b) Mobilized Si concentrations extracted in a 0.1 mol L−1 NaOH solution from fibers that had been incubated for 336 h at pH 3.0, 4.5, 6.0, and 7.5. Error bars indicate standard deviations (n=2).CC BY-NC-ND · PubMed Central
Figure 3 Mobilized Fe concentrations from 1 g L−1 chrysotile in blank and 1 mmol L−1 DFOB, oxalate, citrate, or HEDTA solutions, buffered at pH 3.0, 6.0, 8.5, and 11.5, and in a 1 mmol L−1 HBED solution buffered at pH 11.5. Error bars indicate standard deviations (n=2). On the secondary y axis, Fe mobilization is expressed as a percentage of the initial bulk Fe content of chrysotile (the mean of the bulk Fe content determined in fusion digestions and the NAA analysis minus the Fe in magnetite). Data included in this figure are listed in Table S5 of the Supporting Information.
Figure 3 Mobilized Fe concentrations from 1 g L−1 chrysotile in blank and 1 mmol L−1 DFOB, oxalate, citrate, or HEDTA solutions, buffered at pH 3.0, 6.0, 8.5, and 11.5, and in a 1 mmol L−1 HBED solution buffered at pH 11.5. Error bars indicate standard deviations (n=2). On the secondary y axis, Fe mobilization is expressed as a percentage of the initial bulk Fe content of chrysotile (the mean of the bulk Fe content determined in fusion digestions and the NAA analysis minus the Fe in magnetite). Data included in this figure are listed in Table S5 of the Supporting Information.CC BY-NC-ND · PubMed Central
Figure 4 Mobilized Al concentrations from 1 g L−1 chrysotile in blank and 1 mmol L−1 DFOB, oxalate, citrate, or HEDTA solutions buffered at pH 3.0, 4.5, 6.0, and 7.5. Error bars indicate standard deviations (n=2). On the secondary y axis, Al mobilization is expressed as a percentage of the initial bulk Al content of chrysotile. Apart from chrysotile, also some amounts of Al are located in chlorite impurities (discussion in the main text). Data included in this figure is listed in Table S6 of the Supporting Information.
Figure 4 Mobilized Al concentrations from 1 g L−1 chrysotile in blank and 1 mmol L−1 DFOB, oxalate, citrate, or HEDTA solutions buffered at pH 3.0, 4.5, 6.0, and 7.5. Error bars indicate standard deviations (n=2). On the secondary y axis, Al mobilization is expressed as a percentage of the initial bulk Al content of chrysotile. Apart from chrysotile, also some amounts of Al are located in chlorite impurities (discussion in the main text). Data included in this figure is listed in Table S6 of the Supporting Information.CC BY-NC-ND · PubMed Central
Figure 5 Mössbauer spectra of pristine fibers and fibers weathered for 336 h at pH 3.0 in a blank and 1 mmol L−1 DFOB solution. S1–S3 are subspectra of chrysotile: S1 represents FeII[6], and S2 and S3 represent FeIII[6] and FeIII[4], respectively. The S4 and S5 subspectra represent Fe in magnetite. In the spectrum of fibers weathered in the blank treatment, a ferrihydrite subspectrum (S6) was added. Center shift data of S1–S3 and S6 are listed in Table 1, and those of S4 and S5 are listed in Table S7 of the Supporting Information.
Figure 5 Mössbauer spectra of pristine fibers and fibers weathered for 336 h at pH 3.0 in a blank and 1 mmol L−1 DFOB solution. S1–S3 are subspectra of chrysotile: S1 represents FeII[6], and S2 and S3 represent FeIII[6] and FeIII[4], respectively. The S4 and S5 subspectra represent Fe in magnetite. In the spectrum of fibers weathered in the blank treatment, a ferrihydrite subspectrum (S6) was added. Center shift data of S1–S3 and S6 are listed in Table 1, and those of S4 and S5 are listed in Table S7 of the Supporting Information.CC BY-NC-ND · PubMed Central
Figure 6 EPR spin‐trapping DMPO/HO. I pp values of fibers weathered in blank and 1 mmol L−1 ligand treatments at various pH values (pH 3.0, 4.5, 6.0, 7.5, 8.5, and 11.5) relative to the I pp value of pristine reference fibers (100 %). The incubation time was 336 h. Error bars indicate standard deviations (n=4). For visualization, three DMPO/HO. spectra of fibers weathered in 1 mmol L−1 oxalate treatments at pH 4.5, 7.5, and 11.5 are shown. The I pp value of the second peak from the left (indicated by red bars) was used for determining the peak‐to‐peak intensity. Data for this figure are listed in Table S10 of the Supporting Information.
Figure 6 EPR spin‐trapping DMPO/HO. I pp values of fibers weathered in blank and 1 mmol L−1 ligand treatments at various pH values (pH 3.0, 4.5, 6.0, 7.5, 8.5, and 11.5) relative to the I pp value of pristine reference fibers (100 %). The incubation time was 336 h. Error bars indicate standard deviations (n=4). For visualization, three DMPO/HO. spectra of fibers weathered in 1 mmol L−1 oxalate treatments at pH 4.5, 7.5, and 11.5 are shown. The I pp value of the second peak from the left (indicated by red bars) was used for determining the peak‐to‐peak intensity. Data for this figure are listed in Table S10 of the Supporting Information.CC BY-NC-ND · PubMed Central
Figure 7 EPR spin‐trapping DMPO/HO. I pp values of fibers weathered in blank and 1 mmol L−1 DFOB treatments at pH 7.5 for 0.5, 2, 8, 24, 48 or 336 h, relative to the I pp value of pristine reference fibers (100 %). Error bars indicate standard deviations (n=4). Data for this figure are listed in Table S11 of the Supporting Information.
Figure 7 EPR spin‐trapping DMPO/HO. I pp values of fibers weathered in blank and 1 mmol L−1 DFOB treatments at pH 7.5 for 0.5, 2, 8, 24, 48 or 336 h, relative to the I pp value of pristine reference fibers (100 %). Error bars indicate standard deviations (n=4). Data for this figure are listed in Table S11 of the Supporting Information.CC BY-NC-ND · PubMed Central

Verification

Claims the paper makes

2 Valid · 2 Not valid · 27 Not checked · 123 Own results and interpretations

85 more claims

Create a free account to see all 154 claims and to verify the 33 references still open.

See all claims — free account
  • It may state two separate claims as one. 43
  • Probably not a substantial claim. 25
  • The quote only partly states this claim. 1

Create a free account to see these claims.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

26 more claims about this paper

Create a free account to see every claim other papers make about this one.

See all claims — free account

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

2 of 2

Citations

Cites

Research works printed but not linked: 12

  1. H. Schreier, Vol. Studies in environmental science 37, Elsevier, Amsterdam, 1989.
  2. X. Baur, Pneumonologie 2016, 70, 405– 412;
  3. N. Szeszenia-Dabrowska, U. Wilczyńska, W. Szymczak, K. Laskowicz, Int. J. Occup. Med. Env. 1998, 11, 171– 177; 9753896
  4. Israel Environment Bulletin Vol. 37, Israel Ministry of Environmental Protection, September 2011.
  5. D. R. Kidd, M. H. Ryan, R. E. Haling, H. Lambers, G. A. Sandral, Z. J. Yang, R. A. Culvenor, G. R. Cawthray, A. Stefanski, R. J. Simpson, Plant Soil 2016, 402, 77– 89.
  6. 10.1002/(sici)1097-0274(199712)32:6 · doi:10.1002/(sici)1097-0274(199712)32:6
  7. G. Stroink, C. Blaauw, C. G. White, W. Leiper, Can. Mineral. 1980, 18, 285– 290.
  8. G. Stroink, C. Blaauw, C. G. White, W. Leiper, Canadian Mineralogist 1980, 18, 285– 290.
  9. G. V. Albino, Canadian Mineralogist 1995, 33, 559– 568.
  10. A. Baronnet, Vol. 1, EMU Notes in Mineralogy, Budapest, 1997.
  11. D. L. Parkhurst, C. A. J. Appelo, U. S. Geological Survey Water-Resources Investigations Report, 1999., pp. 99–4259.
  12. E. Murad, U. Schwertmann, Am. Mineral. 1980, 65, 1044– 1049.

Cited by

See all 14

Metadata

Authors
Walter, M., Schenkeveld, W. D. C., Reissner, M., Gille, L., & Kraemer, S. M.
Affiliations
  • University of Vienna (AT)
  • TU Wien (AT)
  • University of Veterinary Medicine Vienna (AT)
Corresponding author
Schenkeveld, Walter D. C.
Venue
Chemistry – A European Journal
Publisher
Wiley
Published
2019-02-04
Volume
25
Issue
13
Pages
3286-3300
ISSN
  • 0947-6539 (ISSN-L)
  • 1521-3765
OpenAlex
W2901439463
Cited by
14
References
79
Citations by year
2026: 2 · 2025: 2 · 2024: 2 · 2023: 2 · 2022: 2 · 2021: 1 · 2020: 2
FWCI
0.75
Type
journal article
Language
en
Open access
Locations
  • Chemistry - A European Journal (publishedVersion, cc-by-nc-nd)
  • PubMed Central (publishedVersion, cc-by-nc-nd)
  • PubMed (publishedVersion)
  • Utrecht University Repository (Utrecht University) (submittedVersion, other-oa)
Funders
Universität Wien (uni:docs program)
Topics
  • Health Sciences › Medicine › Pulmonary and Respiratory Medicine › Occupational and environmental lung diseases
  • Physical Sciences › Environmental Science › Water Science and Technology › Environmental and Analytical Chemistry Studies
  • Physical Sciences › Earth and Planetary Sciences › Geochemistry and Petrology › Geochemistry and Elemental Analysis
Keywords
chrysotile, mineral weathering, pH dependence, hydroxyl radical generation, Fenton reaction, tetrahedral iron, iron speciation, magnesium dissolution, silicon dissolution, dissolution kinetics, soil contamination

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-07, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-07 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (qwen3.8-omni-flash).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.