Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 89 of the 90 references it cites were found in a registry or an index.

Ultra-high to ultra-low drug-loaded micelles: probing host-guest interactions by fluorescence spectroscopy

Open access
Lübtow, Michael M., Marciniak, Henning, Schmiedel, Alexander, Roos, Markus, Lambert, Christoph, Luxenhofer, Robert · 2019 · Chemistry – A European Journal

Published version of a preprint

Abstract

Polymer micelles are an attractive means to solubilize water insoluble compounds such as drugs. Drug loading, formulations stability and control over drug release are crucial factors for drug‐loaded polymer micelles. The interactions between the polymeric host and the guest molecules are considered critical to control these factors but typically barely understood. Here, we compare two isomeric polymer micelles, one of which enables ultra‐high curcumin loading exceeding 50 wt.%, while the other allows a drug loading of only 25 wt.%. In the low capacity micelles, steady‐state fluorescence revealed a very unusual feature of curcumin fluorescence, a high energy emission at 510 nm. Time‐resolved fluorescence upconversion showed that the fluorescence life time of the corresponding species is too short in the high‐capacity micelles, preventing an observable emission in steady‐state. Therefore, contrary to common perception, stronger interactions between host and guest can be detrimental to the drug loading in polymer micelles.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1002/chem.201902619

Cites

89 of 89 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Scheme of the various influences that affect the optical properties of CUR including chemical stability,12a, 12b, 13a solvatochromicity,31a, 31b, 33 tautomerization,34a, 34b, 35, 37, 38, 42, 43 pH,18, 44 conformers,32, 34, 45 as well as specific interactions.33, 46, 47
Figure 1 Scheme of the various influences that affect the optical properties of CUR including chemical stability,12a, 12b, 13a solvatochromicity,31a, 31b, 33 tautomerization,34a, 34b, 35, 37, 38, 42, 43 pH,18, 44 conformers,32, 34, 45 as well as specific interactions.33, 46, 47CC BY-NC-ND · PubMed Central
Figure 2 Absorption spectra and DLS measurements of A‐pPrOzi‐A/CUR (a,b,c) and A‐pBuOx‐A/CUR (d,e,f) formulations at a constant polymer concentration of 10 g L−1 and various CUR concentrations (legend in figures). Absorption spectra of A‐pPrOzi‐A/CUR (a) and A‐pBuOx‐A (d) with corresponding maximum absorbances (blue curve; top, right axis). Normalized absorption spectra of A‐pPrOzi‐A/CUR (b) and A‐pBuOx‐A/CUR (e) with corresponding λ max (blue curve; top, right axis). All absorption measurements were conducted undiluted in quartz cuvettes with d=10 μm. c) Size distribution (intensity) of A‐pPrOzi‐A/CUR formulations with corresponding D h (blue curve; top, right axis). f) D h of A‐pBuOx‐A/CUR formulations (black bars: smaller species; red bars: larger species; left axis) and corresponding percentage of the larger species (blue curve; right axis). Prior to the DLS measurements, the aqueous samples were diluted 1/10 (v/v) with H2O to yield a polymer concentration of 1 g L−1.
Figure 2 Absorption spectra and DLS measurements of A‐pPrOzi‐A/CUR (a,b,c) and A‐pBuOx‐A/CUR (d,e,f) formulations at a constant polymer concentration of 10 g L−1 and various CUR concentrations (legend in figures). Absorption spectra of A‐pPrOzi‐A/CUR (a) and A‐pBuOx‐A (d) with corresponding maximum absorbances (blue curve; top, right axis). Normalized absorption spectra of A‐pPrOzi‐A/CUR (b) and A‐pBuOx‐A/CUR (e) with corresponding λ max (blue curve; top, right axis). All absorption measurements were conducted undiluted in quartz cuvettes with d=10 μm. c) Size distribution (intensity) of A‐pPrOzi‐A/CUR formulations with corresponding D h (blue curve; top, right axis). f) D h of A‐pBuOx‐A/CUR formulations (black bars: smaller species; red bars: larger species; left axis) and corresponding percentage of the larger species (blue curve; right axis). Prior to the DLS measurements, the aqueous samples were diluted 1/10 (v/v) with H2O to yield a polymer concentration of 1 g L−1.CC BY-NC-ND · PubMed Central
Figure 3 Fluorescence spectra of A‐pPrOzi‐A/CUR (a) and A‐pBuOx‐A/CUR (c) at c(CUR)=0.05 g L−1 and different polymer/CUR ratios, measured in quartz cuvettes with d=10 mm. Normalized emission spectra of A‐pPrOzi‐A/CUR (b) and A‐pBuOx‐A/CUR (d).
Figure 3 Fluorescence spectra of A‐pPrOzi‐A/CUR (a) and A‐pBuOx‐A/CUR (c) at c(CUR)=0.05 g L−1 and different polymer/CUR ratios, measured in quartz cuvettes with d=10 mm. Normalized emission spectra of A‐pPrOzi‐A/CUR (b) and A‐pBuOx‐A/CUR (d).CC BY-NC-ND · PubMed Central
Figure 4 Fluorescence upconversion decays of A‐pBuOx‐A/CUR=10/0.05 (black) & 10/0.5 (red) and A‐pPrOzi‐A/CUR=10/0.05 (blue) and 10/0.5 (green) at a) 488–526 nm and b) 540–588 nm. Decays were fitted with a multi‐exponential function exhibiting 5 independent lifetimes. Time resolved emission spectra at different delay times of A‐pBuOx‐A/CUR=10/0.05 (c) and 10/0.5 (d) and A‐pPrOzi‐A/CUR=10/0.05 (e) and 10/0.5 (f). Before the measurements, all samples were diluted with H2O to a constant CUR concentration of 0.05 g L−1 and measured in quartz cuvettes (d=10 mm).
Figure 4 Fluorescence upconversion decays of A‐pBuOx‐A/CUR=10/0.05 (black) & 10/0.5 (red) and A‐pPrOzi‐A/CUR=10/0.05 (blue) and 10/0.5 (green) at a) 488–526 nm and b) 540–588 nm. Decays were fitted with a multi‐exponential function exhibiting 5 independent lifetimes. Time resolved emission spectra at different delay times of A‐pBuOx‐A/CUR=10/0.05 (c) and 10/0.5 (d) and A‐pPrOzi‐A/CUR=10/0.05 (e) and 10/0.5 (f). Before the measurements, all samples were diluted with H2O to a constant CUR concentration of 0.05 g L−1 and measured in quartz cuvettes (d=10 mm).CC BY-NC-ND · PubMed Central
Figure 5 Temperature dependent, normalized absorption spectra of a) A‐pPrOzi‐A/CUR=10/1 and b) A‐pBuOx‐A/CUR=10/1 g L−1 heated from 20 °C to 60 °C. Ratio of the maximum absorbance at a respective temperature and the initial absorbance at 20 °C (abs/abs0) during heating (red curve; top, right axis) and cooling (blue curve; top, right axis). Ratios of (b,e) abs/abs0 and (c,f) abs350nm/abs420nm for (b,c) A‐pPrOzi‐A/CUR=10/0.1; 10/1; 10/4; 10/12 g L−1 and (e,f) A‐pBuOx‐A/CUR=10/0.1; 10/1; 10/4 g L−1 while heating (top curves) and cooling (bottom curves). Prior to the measurements, all samples were diluted with H2O to a similar CUR concentration of ≈0.01 g L−1 and measured in quartz cuvettes with d=10 mm.
Figure 5 Temperature dependent, normalized absorption spectra of a) A‐pPrOzi‐A/CUR=10/1 and b) A‐pBuOx‐A/CUR=10/1 g L−1 heated from 20 °C to 60 °C. Ratio of the maximum absorbance at a respective temperature and the initial absorbance at 20 °C (abs/abs0) during heating (red curve; top, right axis) and cooling (blue curve; top, right axis). Ratios of (b,e) abs/abs0 and (c,f) abs350nm/abs420nm for (b,c) A‐pPrOzi‐A/CUR=10/0.1; 10/1; 10/4; 10/12 g L−1 and (e,f) A‐pBuOx‐A/CUR=10/0.1; 10/1; 10/4 g L−1 while heating (top curves) and cooling (bottom curves). Prior to the measurements, all samples were diluted with H2O to a similar CUR concentration of ≈0.01 g L−1 and measured in quartz cuvettes with d=10 mm.CC BY-NC-ND · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

7 more claims about this paper

Create a free account to see every claim other papers make about this one.

See all claims — free account

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 90 references

Research works printed but not linked: 6

  1. Zhang D.-w., 2013, Evid.-Based Complementary Altern. Med., 636053
  2. Jurenka J. S., 2009, Altern. Med. Rev., 14, 141
  3. Lirdprapamongkol K., 2010, In Vivo, 24, 501
  4. Waranyoupalin R., 2009, Cent. Eur. J. Chem., 7, 388
  5. 10.1562/0031-8655(2000)0720625eosote2.0.co2 · DOI · Paper page
  6. Haider M. S., 2019, ChemRxiv

Cited by

See all 35

Metadata

Authors
Lübtow, M. M., Marciniak, H., Schmiedel, A., Roos, M., Lambert, C., & Luxenhofer, R.
Affiliations
University of Würzburg (DE)
Corresponding author
Luxenhofer, Robert
Venue
Chemistry – A European Journal
Publisher
Wiley
Published
2019-09-02
Volume
25
Issue
54
Pages
12601-12610
ISSN
  • 0947-6539 (ISSN-L)
  • 1521-3765
OpenAlex
W2959437082
Cited by
35
References
90
Citations by year
2026: 1 · 2025: 3 · 2024: 1 · 2023: 6 · 2022: 6 · 2021: 6 · 2020: 8 · 2019: 4
FWCI
2.45
Type
journal article
Language
en
Open access
Locations
  • Chemistry - A European Journal (publishedVersion, cc-by-nc-nd)
  • ChemRxiv (acceptedVersion, cc-by-nc-nd)
  • PubMed Central (publishedVersion, cc-by-nc-nd)
  • PubMed (publishedVersion)
  • Figshare (submittedVersion, cc-by-nc-nd)
  • Online Publication Service of Würzburg University (Würzburg University) (submittedVersion, cc-by-nc-nd)
Funders
  • Deutsche Forschungsgemeinschaft (398461692)
  • Evonik Stiftung (n.a.)
  • Bayerisches Staatsministerium für Wissenschaft, Forschung und Kunst (SolTech Consortium)
Topics
  • Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Surfactants and Colloidal Systems
  • Physical Sciences › Materials Science › Biomaterials › Nanoparticle-Based Drug Delivery
  • Physical Sciences › Chemistry › Organic Chemistry › Supramolecular Chemistry and Complexes
Keywords
polymeric micelles, drug loading, host-guest interactions, curcumin, fluorescence upconversion, time-resolved fluorescence, fluorescence lifetime, drug delivery, micelle stability
MeSH terms
Antineoplastic Agents, Curcumin, Drug Carriers, Coloring Agents, Hydrogen-Ion Concentration, Kinetics, Light, Micelles, Particle Size, Polymers, Solubility, Spectrometry, Fluorescence, Temperature, Hydrophobic and Hydrophilic Interactions, Drug Liberation

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Ultra-high to ultra-low drug-loaded micelles: probing host-guest interactions by fluorescence spectroscopy. https://app.cochat.ai/papers/10.1002/chem.201902619
The paper
Lübtow, M. M., Marciniak, H., Schmiedel, A., Roos, M., Lambert, C., & Luxenhofer, R. (2019). Ultra-high to ultra-low drug-loaded micelles: probing host-guest interactions by fluorescence spectroscopy. Chemistry – A European Journal. https://doi.org/10.1002/chem.201902619

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.