A Self‐Supported λ‐MnO2 Film Electrode used for Electrochemical Lithium Recovery from Brines
The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
Lithium recovery from an aqueous resource was accelerated by electrochemically driving the transformation of Mn IV/Mn III with a spinel λ‐MnO 2 film electrode. A λ‐MnO 2 electrode without binders or conductive additives is preferred for achieving a large capacity at high current density and long‐term cycling capability. In this study, a film of Mn(OH)2 was first deposited on the surface of Pt or graphite substrates owing to alkalization near the cathode, then it was oxidized to a Mn 3 O 4 film by air, followed by being hydrothermally lithiated to LiMn 2 O 4 spinel and, finally, it was turned into the λ‐MnO 2 film electrode through potentiostatic delithiation. The results show that the charging/discharging electric capacity of the fabricated λ‐MnO 2 film electrode was up to ≈100 mAh g−1 at a current density of 50 mA g−1 in 30 m m Li+ aqueous solution, twice that of the λ‐MnO 2 powder electrode. Also, 82.3 % lithium capacity remained after 100 cycles of an electrochemically assisted lithium recovery process, indicating high availability and good stability of the λ‐MnO 2 spinel on the electrode. The energy consumption for each cycle is estimated to be approximately 1.55±0.09 J, implying that only 4.14 Wh is required for recovery of one mole of lithium ions by this method.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hannan, M. A., Lipu, M. S. H., Hussain, A., & Mohamed, A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.001 · Cited by 2,005
Grosjean, C., Miranda, P. H., Perrin, M., & Poggi, P. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.11.023 · Cited by 847
Extraction of lithium with functionalized lithium ion-sieves
Xu, X., Chen, Y., Wan, P., Gasem, K., Wang, K., He, T., Adidharma, H., & Fan, M. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2016.09.004 · Cited by 536
Self-citationLithium recovery from brine using a λ-MnO2/activated carbon hybrid supercapacitor system
Kim, S., Lee, J., Kang, J. S., Jo, K., Kim, S., Sung, Y.-E., & Yoon, J. (2015) · Chemosphere · doi:10.1016/j.chemosphere.2015.01.024 · Cited by 228
Highly selective lithium recovery from brine using a λ-MnO2–Ag battery
Lee, J., Yu, S.-H., Kim, C., Sung, Y.-E., & Yoon, J. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp50919b · Cited by 220
Trócoli, R., Erinmwingbovo, C., & La Mantia, F. (2017) · ChemElectroChem · doi:10.1002/celc.201600509 · Cited by 136
Marchini, F., Rubi, D., del Pozo, M., Williams, F. J., & Calvo, E. J. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b11722 · Cited by 123
Cited by
Sun, Y., Wang, Q., Wang, Y., Yun, R., & Xiang, X. (2021) · Separation and Purification Technology · doi:10.1016/j.seppur.2020.117807 · Cited by 685
Self-citationElectrochemical Methods for Lithium Recovery: A Comprehensive and Critical Review
Battistel, A., Palagonia, M. S., Brogioli, D., La Mantia, F., & Trócoli, R. (2020) · Advanced Materials · doi:10.1002/adma.201905440 · Cited by 504
Novel approaches for lithium extraction from salt-lake brines: A review
Liu, G., Zhao, Z., & Ghahreman, A. (2019) · Hydrometallurgy · doi:10.1016/j.hydromet.2019.05.005 · Cited by 465
Materials for lithium recovery from salt-lake brine
Xu, P., Hong, J., Qian, X., Xu, Z., Xia, H., Tao, X., Xu, Z., & Ni, Q.-Q. (2021) · Journal of Materials Science · doi:10.1007/s10853-020-05019-1 · Cited by 296
A review on lithium recovery using electrochemical capturing systems
Zavahir, S., Elmakki, T., Gulied, M., Ahmad, Z., Al-Sulaiti, L., Shon, H. K., Chen, Y., Park, H., Batchelor, B., & Han, D. S. (2021) · Desalination · doi:10.1016/j.desal.2020.114883 · Cited by 220
Self-citation
Metadata
- Authors
- Xu, X., Zhou, Y., Feng, Z., Kahn, N. U., Haq Khan, Z. U., Tang, Y., Sun, Y., Wan, P., Chen, Y., & Fan, M.
- Venue
- ChemPlusChem
- Publisher
- Wiley
- Published
- 2018-06
- Volume
- 83
- Issue
- 6
- Pages
- 521-528
- ISSN
- 2192-6506 (ISSN-L)
- OpenAlex
- W2805274926
- Cited by
- 57
- References
- 7
- FWCI
- 2.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.