A Method for Creating Microporous Carbon Materials with Excellent CO2‐Adsorption Capacity and Selectivity
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
A new synthetic approach for the fabrication of microporous carbon materials (HCMs) by using discrete chelating zinc species as dynamic molecular porogens to create extra micropores that enhance their CO 2‐adsorption capacity and selectivity is reported. During the carbonization process, the evaporation of the in situ‐formed Zn species would create additional nanochannels that contribute to the additional micropore volume for CO 2 adsorption. The resultant HCMs show an increased number of micropores, with sizes in the range 0.7–1.0 nm and a high CO 2‐adsorption capacity of 5.4 mmol g−1 (23.8 wt %) at 273 K and 3.8 mmol g−1 (16.7 wt %) at 298 K and 1 bar, which are superior to those of most carbon‐based adsorbents with N‐doping or high specific surface areas. Dynamic gas‐separation measurements, by using 16 % CO 2 in N 2 (v/v) as a feedstock, demonstrated that CO 2 could be effectively separated from N 2 under ambient conditions and shows a high separation factor (S=110) for CO 2 over N 2, thereby reflecting a strongly competitive CO 2‐adsorption capacity. If the feedstock contained water vapor, the dynamic capacity of CO 2 was almost identical to that measured under dry conditions, thus indicating that the carbon material had excellent tolerance to humidity. Easy CO 2 release could be realized by purging an argon flow through the fixed‐bed adsorber at 298 K, thus indicating good regeneration ability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mesoporous carbon materials: Synthesis and modification
Liang, C., Li, Z., & Dai, S. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702046 · Cited by 1,935
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
Effect of pore size on carbon dioxide sorption by carbide derived carbon
Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01176f · Cited by 668
Critical role of small micropores in high CO2 uptake
Zhang, Z., Zhou, J., Xing, W., Xue, Q., Yan, Z., Zhuo, S., & Qiao, S. Z. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp44436d · Cited by 263
Cited by
Enhanced CO2 Capture Capacity of Nitrogen-Doped Biomass-Derived Porous Carbons
Chen, J., Yang, J., Hu, G., Hu, X., Li, Z., Shen, S., Radosz, M., & Fan, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01425 · Cited by 419
Zhang, Y., Liu, L., Zhang, P., Wang, J., Xu, M., Deng, Q., Zeng, Z., & Deng, S. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.08.169 · Cited by 261
Rao, L., Liu, S., Wang, L., Ma, C., Wu, J., An, L., & Hu, X. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.11.065 · Cited by 254
Yang, M., Guo, L., Hu, G., Hu, X., Xu, L., Chen, J., Dai, W., & Fan, M. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b01311 · Cited by 193
Wang, L., Rao, L., Xia, B., Wang, L., Yue, L., Liang, Y., DaCosta, H., & Hu, X. (2018) · Carbon · doi:10.1016/j.carbon.2018.01.003 · Cited by 172
Metadata
- Authors
- Qian, D., Lei, C., Wang, E., Li, W., & Lu, A.
- Venue
- ChemSusChem
- Publisher
- Wiley
- Published
- 2013-10-02
- Volume
- 7
- Issue
- 1
- Pages
- 291-298
- ISSN
- 1864-5631 (ISSN-L)
- 1864-564X
- OpenAlex
- W2080629430
- Cited by
- 130
- References
- 4
- FWCI
- 14.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Method for Creating Microporous Carbon Materials with Excellent CO2‐Adsorption Capacity and Selectivity. https://app.cochat.ai/papers/10.1002/cssc.201300585
- The paper
- Qian, D., Lei, C., Wang, E., Li, W., & Lu, A. (2014). A Method for Creating Microporous Carbon Materials with Excellent CO2‐Adsorption Capacity and Selectivity. ChemSusChem. https://doi.org/10.1002/cssc.201300585
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.