The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Phase Transformation Behavior and Stability of LiNiO2 Cathode Material for Li‐Ion Batteries Obtained from In Situ Gas Analysis and Operando X‐Ray Diffraction
Abstract
Ni‐rich layered oxide cathode materials, in particular the end member LiNiO 2, suffer from drawbacks such as high surface reactivity and severe structural changes during de‐/lithiation, leading to accelerated degradation and limiting practical implementation of these otherwise highly promising electrode materials in Li‐ion batteries. Among all known phase transformations occurring in LiNiO 2, the one from the H2 phase to the H3 phase at high state of charge is believed to have the most detrimental impact on the material's stability. In this work, the multistep phase transformation process and associated effects are analyzed by galvanostatic cycling, operando X‐ray diffraction, and in situ pressure and gas analysis. The combined results provide thorough insights into the structural changes and how they affect the stability of LiNiO 2. During the H2–H3 transformation, the most significant change occurs in the c‐lattice parameter, resulting in large mechanical stress in LiNiO 2. As for electrochemical stability, it suffers strongly in the H3 region. Oxygen evolution is observed not only during charge but also during discharge and found to be correlated with the presence of the H2 and H3 phases. Taken together, the experimental data improve the understanding of the degradation processes and the inherent instability of LiNiO 2 in Li‐ion cells when operated above around 75 % state of charge.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shannon, R. D. (1976) · Acta Crystallographica Section A · doi:10.1107/s0567739476001551 · Cited by 66,145
Cited by
Bulk fatigue induced by surface reconstruction in layered Ni-rich cathodes for Li-ion batteries
Xu, C., Märker, K., Lee, J., Mahadevegowda, A., Reeves, P. J., Day, S. J., Groh, M. F., Emge, S. P., Ducati, C., Layla Mehdi, B., et al. (2021) · Nature Materials · doi:10.1038/s41563-020-0767-8 · Cited by 707
Multi-anionic and -cationic compounds: new high entropy materials for advanced Li-ion batteries
Wang, Q., Sarkar, A., Wang, D., Velasco, L., Azmi, R., Bhattacharya, S. S., Bergfeldt, T., Düvel, A., Heitjans, P., Brezesinski, T., et al. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00368a · Cited by 447
Self-citationPhase Behavior during Electrochemical Cycling of Ni‐Rich Cathode Materials for Li‐Ion Batteries
Xu, C., Reeves, P. J., Jacquet, Q., & Grey, C. P. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003404 · Cited by 429
Yu, H., Cao, Y., Chen, L., Hu, Y., Duan, X., Dai, S., Li, C., & Jiang, H. (2021) · Nature Communications · doi:10.1038/s41467-021-24893-0 · Cited by 408
Choi, J. U., Voronina, N., Sun, Y., & Myung, S. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002027 · Cited by 394
Metadata
- Authors
- de Biasi, L., Schiele, A., Roca‐Ayats, M., Garcia, G., Brezesinski, T., Hartmann, P., & Janek, J.
- Venue
- ChemSusChem
- Publisher
- Wiley
- Published
- 2019-04-04
- Volume
- 12
- Issue
- 10
- Pages
- 2240-2250
- ISSN
- 1864-5631 (ISSN-L)
- 1864-564X
- OpenAlex
- W2920891291
- Cited by
- 269
- References
- 1
- FWCI
- 8.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Phase Transformation Behavior and Stability of LiNiO2 Cathode Material for Li‐Ion Batteries Obtained from In Situ Gas Analysis and Operando X‐Ray Diffraction. https://app.cochat.ai/papers/10.1002/cssc.201900032
- The paper
- de Biasi, L., Schiele, A., Roca‐Ayats, M., Garcia, G., Brezesinski, T., Hartmann, P., & Janek, J. (2019). Phase Transformation Behavior and Stability of LiNiO2 Cathode Material for Li‐Ion Batteries Obtained from In Situ Gas Analysis and Operando X‐Ray Diffraction. ChemSusChem. https://doi.org/10.1002/cssc.201900032
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.