The DOI matches its Crossref record; 127 of the 127 references it cites were found in a registry or an index.
Confronting the Challenges of Next‐Generation Silicon Anode‐Based Lithium‐Ion Batteries: Role of Designer Electrolyte Additives and Polymeric Binders
Abstract
Silicon has emerged as the next‐generation anode material for high‐capacity lithium‐ion batteries (LIBs). It is currently of scientific and practical interest to encounter increasingly growing demands for high energy/power density electrochemical energy‐storage devices for use in electric vehicles (xEVs), renewable energy sources, and smart grid/utility applications. Improvements to existing conventional LIBs are required to provide higher energy, longer cycle lives. This is attributed to its unparalleled theoretical capacity (4200 mAh g−1 for Li 4.4 Si), which is approximately 10 times higher than that of a state‐of‐the‐art graphitic anode (372 mAh g−1 for LiC 6), with a suitable operating voltage, natural abundance, environmental benignity, nontoxicity, high safety, and so forth. However, despite the overwhelming beneficial features, the practical integration of LIBs containing a silicon anode beyond the commercial niche is hampered by unavoidable challenges, such as excessive volume changes during the (de‐)alloying process, inherently low electrical and ionic conductivities, an unstable solid–electrolyte interphase, and electrolyte drying out. Among various extenuating strategies, non‐electrode factors encompassing electrolyte additives and polymeric binders are regarded as the most economical, and effective approaches towards circumventing these disadvantages are in short supply. With the aim of providing an in‐depth insight into rapidly growing accounts of electrolyte additives and binders for use with silicon anode‐based LIBs, this Review assesses the current state of the art of research and thereby examines opportunities to open up new avenues for the practical realization of these silicon anode‐based LIBs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wu, H., Chan, G., Choi, J. W., Ryu, I., Yao, Y., McDowell, M. T., Lee, S. W., Jackson, A., Yang, Y., Hu, L., et al. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.35 · Cited by 2,478
Designing nanostructured Si anodes for high energy lithium ion batteries
Wu, H., & Cui, Y. (2012) · Nano Today · doi:10.1016/j.nantod.2012.08.004 · Cited by 2,350
Winter, M., Barnett, B., & Xu, K. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00422 · Cited by 2,193
Alloy Negative Electrodes for Li-Ion Batteries
Obrovac, M. N., & Chevrier, V. L. (2014) · Chemical Reviews · doi:10.1021/cr500207g · Cited by 2,175
An, S. J., Li, J., Daniel, C., Mohanty, D., Nagpure, S., & Wood, D. L. (2016) · Carbon · doi:10.1016/j.carbon.2016.04.008 · Cited by 2,121
Single-molecule mechanics of mussel adhesion
Lee, H., Scherer, N. F., & Messersmith, P. B. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0605552103 · Cited by 2,112
Structural Changes in Silicon Anodes during Lithium Insertion/Extraction
Obrovac, M. N., & Christensen, L. (2004) · Electrochemical and Solid-State Letters · doi:10.1149/1.1652421 · Cited by 1,995
A Yolk-Shell Design for Stabilized and Scalable Li-Ion Battery Alloy Anodes
Liu, N., Wu, H., McDowell, M. T., Yao, Y., Wang, C., & Cui, Y. (2012) · Nano Letters · doi:10.1021/nl3014814 · Cited by 1,842
A Major Constituent of Brown Algae for Use in High-Capacity Li-Ion Batteries
Kovalenko, I., Zdyrko, B., Magasinski, A., Hertzberg, B., Milicev, Z., Burtovyy, R., Luzinov, I., & Yushin, G. (2011) · Science · doi:10.1126/science.1209150 · Cited by 1,802
McDowell, M. T., Lee, S. W., Nix, W. D., & Cui, Y. (2013) · Advanced Materials · doi:10.1002/adma.201301795 · Cited by 1,670
Cited by
Guidelines and trends for next-generation rechargeable lithium and lithium-ion batteries
Wu, F., Maier, J., & Yu, Y. (2020) · Chemical Society Reviews · doi:10.1039/c7cs00863e · Cited by 2,229
Lithium-ion batteries – Current state of the art and anticipated developments
Armand, M., Axmann, P., Bresser, D., Copley, M., Edström, K., Ekberg, C., Guyomard, D., Lestriez, B., Novák, P., Petranikova, M., et al. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228708 · Cited by 888
Eshetu, G. G., Zhang, H., Judez, X., Adenusi, H., Armand, M., Passerini, S., & Figgemeier, E. (2021) · Nature Communications · doi:10.1038/s41467-021-25334-8 · Cited by 485
Self-citationLiquid electrolyte development for low-temperature lithium-ion batteries
Hubble, D., Brown, D. E., Zhao, Y., Fang, C., Lau, J., McCloskey, B. D., & Liu, G. (2022) · Energy & Environmental Science · doi:10.1039/d1ee01789f · Cited by 462
Toward Green Battery Cells: Perspective on Materials and Technologies
Dühnen, S., Betz, J., Kolek, M., Schmuch, R., Winter, M., & Placke, T. (2020) · Small Methods · doi:10.1002/smtd.202000039 · Cited by 395
Polymers in Lithium‐Ion and Lithium Metal Batteries
Li, J., Cai, Y., Wu, H., Yu, Z., Yan, X., Zhang, Q., Gao, T. Z., Liu, K., Jia, X., & Bao, Z. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003239 · Cited by 348
Toward Practical High-Energy and High-Power Lithium Battery Anodes: Present and Future
Wang, C., Yang, C., & Zheng, Z. (2022) · Advanced Science · doi:10.1002/advs.202105213 · Cited by 337
Zhang, C., Wang, F., Han, J., Bai, S., Tan, J., Liu, J., & Li, F. (2021) · Small Structures · doi:10.1002/sstr.202100009 · Cited by 300
Ezeigwe, E. R., Dong, L., Manjunatha, R., Tan, M., Yan, W., & Zhang, J. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.105907 · Cited by 87
Metadata
- Authors
- Eshetu, G. G., & Figgemeier, E.
- Venue
- ChemSusChem
- Publisher
- Wiley
- Published
- 2019-06-05
- Volume
- 12
- Issue
- 12
- Pages
- 2515-2539
- ISSN
- 1864-5631 (ISSN-L)
- 1864-564X
- OpenAlex
- W2921096317
- Cited by
- 273
- References
- 127
- FWCI
- 11.81
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.