CoChat

Development of a process for producing high‐purity calcium carbonate (CaCO3) from waste cement using pressurized CO2

Katsuyama, Yasuro, Yamasaki, Akihiro, Iizuka, Atsushi, Fujii, Minoru, Kumagai, Kazukiyo, Yanagisawa, Yukio · 2005 · Environmental Progress
Cited by 138

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Abstract

A new type of process for producing high‐purity calcium carbonate from waste cement powder was developed. The process consists of two main reactions; extraction of calcium in the form of calcium ions from waste cement powder in a water slurry by pressurized CO 2 (typically at several MPa), and precipitation of calcium carbonate (CaCO 3) from the extracted solution by reduction of the CO 2 pressure. The process can be recognized as the emission reduction process of CO 2 as well. Laboratory‐scale experimental studies were conducted for both the extraction reaction and the precipitation reaction, to examine the feasibility of the process. The extraction process was found to proceed at a relatively high rate, especially during the initial 10 min. The concentration of calcium ions exceeded the thermodynamic solubility of CaCO 3 (supersaturation) when abundant waste cement was available. After filtration of the residues, CaCO 3 particles with >98% purity were obtained by depressurizing the CO 2. The dependency of the reaction rates on the operating conditions, such as the ratio of waste cement to water, CO 2 pressure, and particle size of waste cement particles, was investigated. A process design was carried out based on the experimental results, assuming that the present process is applied to two types of CaCO 3 production process: flue gas desulfurization and production of ultrahigh‐purity CaCO 3. The estimated costs per 1 metric ton of CaCO 3 were USD 136 for desulfurization and USD 323 for high‐purity CaCO 3. © 2005 American Institute of Chemical Engineers Environ Prog, 2005

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1002/ep.10080

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 138

Metadata

Authors
Katsuyama, Y., Yamasaki, A., Iizuka, A., Fujii, M., Kumagai, K., & Yanagisawa, Y.
Venue
Environmental Progress
Publisher
Wiley
Published
2005-06-14
Volume
24
Issue
2
Pages
162-170
ISSN
  • 0278-4491 (ISSN-L)
  • 1547-5921
OpenAlex
W2022896691
Cited by
138
References
2
FWCI
0.85
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.