Development of a process for producing high‐purity calcium carbonate (CaCO3) from waste cement using pressurized CO2
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
A new type of process for producing high‐purity calcium carbonate from waste cement powder was developed. The process consists of two main reactions; extraction of calcium in the form of calcium ions from waste cement powder in a water slurry by pressurized CO 2 (typically at several MPa), and precipitation of calcium carbonate (CaCO 3) from the extracted solution by reduction of the CO 2 pressure. The process can be recognized as the emission reduction process of CO 2 as well. Laboratory‐scale experimental studies were conducted for both the extraction reaction and the precipitation reaction, to examine the feasibility of the process. The extraction process was found to proceed at a relatively high rate, especially during the initial 10 min. The concentration of calcium ions exceeded the thermodynamic solubility of CaCO 3 (supersaturation) when abundant waste cement was available. After filtration of the residues, CaCO 3 particles with >98% purity were obtained by depressurizing the CO 2. The dependency of the reaction rates on the operating conditions, such as the ratio of waste cement to water, CO 2 pressure, and particle size of waste cement particles, was investigated. A process design was carried out based on the experimental results, assuming that the present process is applied to two types of CaCO 3 production process: flue gas desulfurization and production of ultrahigh‐purity CaCO 3. The estimated costs per 1 metric ton of CaCO 3 were USD 136 for desulfurization and USD 323 for high‐purity CaCO 3. © 2005 American Institute of Chemical Engineers Environ Prog, 2005
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Carbon dioxide disposal in carbonate minerals
Lackner, K. S., Wendt, C. H., Butt, D. P., Joyce, E. L., & Sharp, D. H. (1995) · Energy · doi:10.1016/0360-5442(95)00071-n · Cited by 1,021
Carbon dioxide sequestration by direct mineral carbonation: process mineralogy of feed and products
O’Connor, W. K., Dahlin, D. C., Rush, G. E., Dahlin, C. L., & Collins, W. K. (2002) · Mining, Metallurgy & Exploration · doi:10.1007/bf03403262 · Cited by 181
Cited by
A review of mineral carbonation technologies to sequester CO 2
Sanna, A., Uibu, M., Caramanna, G., Kuusik, R., & Maroto-Valer, M. M. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00035h · Cited by 1,258
Carbonation of cement paste: Understanding, challenges, and opportunities
Šavija, B., & Luković, M. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.04.138 · Cited by 866
Carbon capture and storage using alkaline industrial wastes
Bobicki, E. R., Liu, Q., Xu, Z., & Zeng, H. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2011.11.002 · Cited by 666
Li, L., Zhao, N., Wei, W., & Sun, Y. (2013) · Fuel · doi:10.1016/j.fuel.2011.08.022 · Cited by 480
Comparative assessment of CO2 capture technologies for carbon-intensive industrial processes
Kuramochi, T., Ramírez, A., Turkenburg, W., & Faaij, A. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2011.05.001 · Cited by 474
Hanifa, M., Agarwal, R., Sharma, U., Thapliyal, P. C., & Singh, L. P. (2023) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.102292 · Cited by 372
Phase assemblance evolution during wet carbonation of recycled concrete fines
Shen, P., Zhang, Y., Jiang, Y., Zhan, B., Lu, J., Zhang, S., Xuan, D., & Poon, C. S. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.106733 · Cited by 315
Potential of CO 2 sequestration through construction and demolition (C&D) waste—An overview
Kaliyavaradhan, S. K., & Ling, T.-C. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.05.014 · Cited by 255
(2008) · Cited by 201
Lippiatt, N., Ling, T.-C., & Pan, S.-Y. (2020) · Journal of Building Engineering · doi:10.1016/j.jobe.2019.101062 · Cited by 189
Waste materials for carbon capture and storage by mineralisation (CCSM)–A UK perspective
Sanna, A., Dri, M., Hall, M. R., & Maroto-Valer, M. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.06.049 · Cited by 159
Sustainable bio-inspired limestone eggshell powder for potential industrialized applications
Cree, D., & Rutter, A. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00035 · Cited by 151
Pasquier, L.-C., Mercier, G., Blais, J.-F., Cecchi, E., & Kentish, S. (2016) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2016.04.030 · Cited by 73
Recovery and carbonation of 100% of calcium in waste concrete fines: Experimental results
Vanderzee, S., & Zeman, F. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.257 · Cited by 65
Amine Laadila, M., LeBihan, Y., Caron, R.-F., & Vaneeckhaute, C. (2021) · Waste Management · doi:10.1016/j.wasman.2020.11.031 · Cited by 37
Irfan, M. F., Usman, M. R., & Rashid, A. (2018) · Energy · doi:10.1016/j.energy.2018.06.020 · Cited by 23
Metadata
- Authors
- Katsuyama, Y., Yamasaki, A., Iizuka, A., Fujii, M., Kumagai, K., & Yanagisawa, Y.
- Venue
- Environmental Progress
- Publisher
- Wiley
- Published
- 2005-06-14
- Volume
- 24
- Issue
- 2
- Pages
- 162-170
- ISSN
- 0278-4491 (ISSN-L)
- 1547-5921
- OpenAlex
- W2022896691
- Cited by
- 138
- References
- 2
- FWCI
- 0.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.