The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
SOFIE project – 3D shaking table test on a seven‐storey full‐scale cross‐laminated timber building
Abstract
SUMMARY: Multi‐storey buildings made of cross‐laminated timber panels (X‐lam) are becoming a stronger and economically valid alternative in Europe compared with traditional masonry or concrete buildings. During the design process of these multi‐storey buildings, also their earthquake behaviour has to be addressed, especially in seismic‐prone areas such as Italy. However, limited knowledge on the seismic performance is available for this innovative massive timber product. On the basis of extensive testing series comprising monotonic and reversed cyclic tests on X‐lam panels, a pseudodynamic test on a one‐storey X‐lam specimen and 1D shaking table tests on a full‐scale three‐storey specimen, a full‐scale seven‐storey building was designed according to the European seismic standard Eurocode 8 and subjected to earthquake loading on a 3D shaking table. The building was designed with a preliminary action reduction factor of three that had been derived from the experimental results on the three‐storey building. The outcomes of this comprehensive research project called ‘SOFIE – Sistema Costruttivo Fiemme’ proved the suitability of multi‐storey X‐lam structures for earthquake‐prone regions. The buildings demonstrated self‐centring capabilities and high stiffness combined with sufficient ductility to avoid brittle failures. The tests provided useful information for the seismic design with force‐based methods as defined in Eurocode 8, that is, a preliminary experimentally based action reduction factor of three was confirmed. Valid, ductile joint assemblies were developed, and their importance for the energy dissipation in buildings with rigid X‐lam panels became evident. The seven‐storey building showed relatively high accelerations in the upper storeys, which could lead to secondary damage and which have to be addressed in future research. Copyright © 2013 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
New Technologies for Construction of Medium-Rise Buildings in Seismic Regions: The XLAM Case
Ceccotti, A. (2008) · Structural Engineering International · doi:10.2749/101686608784218680 · Cited by 188
Self-citationExperimental Seismic Response of a Full-Scale Six-Story Light-Frame Wood Building
van de Lindt, J. W., Pei, S., Pryor, S. E., Shimizu, H., & Isoda, H. (2010) · Journal of Structural Engineering · doi:10.1061/(asce)st.1943-541x.0000222 · Cited by 156
Ductility aspects of reinforced and non-reinforced timber joints
Blaß, H. J., & Schädle, P. (2011) · Engineering Structures · doi:10.1016/j.engstruct.2011.02.001 · Cited by 129
Pang, W., Rosowsky, D. V., Pei, S., & van de Lindt, J. W. (2010) · Journal of Structural Engineering · doi:10.1061/(asce)st.1943-541x.0000181 · Cited by 85
SOFIE Project - Cyclic tests on cross-laminated wooden panels
Ceccotti, A., Lauriola, M. P., Pinna, M., & Sandhaas, C. (2006) · AirIuav (Università Iuav di Venezia) · Cited by 45
Self-citationQuasi-static and pseudo-dynamic tests on X-lam walls and buildings
Lauriola, M. P., & Sandhaas, C. (2006) · Cited by 18
Self-citation
Cited by
The wood from the trees: The use of timber in construction
Ramage, M. H., Burridge, H., Busse-Wicher, M., Fereday, G., Reynolds, T., Shah, D. U., Wu, G., Yu, L., Fleming, P., Densley-Tingley, D., et al. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.09.107 · Cited by 1,402
Emerging Engineered Wood for Building Applications
Ding, Y., Pang, Z., Lan, K., Yao, Y., Panzarasa, G., Xu, L., Lo Ricco, M., Rammer, D. R., Zhu, J. Y., Hu, M., et al. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00450 · Cited by 326
Cyclic Behavior of CLT Wall Systems: Experimental Tests and Analytical Prediction Models
Gavric, I., Fragiacomo, M., & Ceccotti, A. (2015) · Journal of Structural Engineering · doi:10.1061/(asce)st.1943-541x.0001246 · Cited by 272
Self-citationExperimental Testing of Rocking Cross-Laminated Timber Walls with Resilient Slip Friction Joints
Hashemi, A., Zarnani, P., Masoudnia, R., & Quenneville, P. (2018) · Journal of Structural Engineering · doi:10.1061/(asce)st.1943-541x.0001931 · Cited by 169
Cross-Laminated Timber for Seismic Regions: Progress and Challenges for Research and Implementation
Pei, S., van de Lindt, J. W., Popovski, M., Berman, J. W., Dolan, J. D., Ricles, J., Sause, R., Blomgren, H., & Rammer, D. R. (2016) · Journal of Structural Engineering · doi:10.1061/(asce)st.1943-541x.0001192 · Cited by 150
Seismic Design of Cross-Laminated Timber Buildings
Tannert, T., Follesa, M., Fragiacomo, M., Gonzalez, P., Isoda, H., Moroder, D., Xiong, H., & van de Lindt, J. (2018) · Wood and Fiber Science · doi:10.22382/wfs-2018-037 · Cited by 77
Cross-laminated timber in the USA: Opportunity for hardwoods?
Espinoza, O., & Buehlmann, U. (2018) · Current Forestry Reports · doi:10.1007/s40725-018-0071-x · Cited by 59
A numerical study of coupled timber walls with slip friction damping devices
Hashemi, A., Masoudnia, R., & Quenneville, P. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.05.160 · Cited by 46
Dynamic response of an innovative hybrid structure in hardwood
Leyder, C., Wanninger, F., Frangi, A., & Chatzi, E. (2015) · Proceedings of the Institution of Civil Engineers - Construction Materials · doi:10.1680/coma.14.00043 · Cited by 32
Dynamic characterization of timber floor subassemblies: Sensitivity analysis and modeling issues
Pasca, D. P., Aloisio, A., Fragiacomo, M., & Tomasi, R. (2021) · Journal of Structural Engineering · doi:10.1061/(asce)st.1943-541x.0003179 · Cited by 15
Metadata
- Authors
- Ceccotti, A., Sandhaas, C., Okabe, M., Yasumura, M., Minowa, C., & Kawai, N.
- Venue
- Earthquake Engineering & Structural Dynamics
- Publisher
- Wiley
- Published
- 2013-05-23
- Volume
- 42
- Issue
- 13
- Pages
- 2003-2021
- ISSN
- 0098-8847 (ISSN-L)
- 1096-9845
- OpenAlex
- W2152862499
- Cited by
- 388
- References
- 6
- FWCI
- 31.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.