The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
System identification of linear structures based on Hilbert–Huang spectral analysis. Part 1: normal modes
Abstract
Based on the Hilbert–Huang spectral analysis, a method is proposed to identify multi‐degree‐of‐freedom (MDOF) linear systems using measured free vibration time histories. For MDOF systems, the normal modes have been assumed to exist. In this method, the measured response data, which are polluted by noises, are first decomposed into modal responses using the empirical mode decomposition (EMD) approach with intermittency criteria. Then, the Hilbert transform is applied to each modal response to obtain the instantaneous amplitude and phase angle time histories. A linear least‐square fit procedure is proposed to identify the natural frequency and damping ratio from the instantaneous amplitude and phase angle for each modal response. Based on a single measurement of the free vibration time history at one appropriate location, natural frequencies and damping ratios can be identified. When the responses at all degrees of freedom are measured, the mode shapes and the physical mass, damping and stiffness matrices of the structure can be determined. The applications of the proposed method are illustrated using three linear systems with different dynamic characteristics. Numerical simulation results demonstrate that the proposed system identification method yields quite accurate results, and it offers a new and effective tool for the system identification of linear structures in which normal modes exist. Copyright © 2003 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Huang, N. E., Shen, Z., Long, S. R., Wu, M. C., Shih, H. H., Zheng, Q., Yen, N.-C., Tung, C. C., & Liu, H. H. (1998) · Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.1998.0193 · Cited by 23,564
Self-citationA NEW VIEW OF NONLINEAR WATER WAVES: The Hilbert Spectrum
Huang, N. E., Shen, Z., & Long, S. R. (1999) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fluid.31.1.417 · Cited by 2,098
Self-citationHilbert Transforms in Signal Processing
Hahn, S. L. (1996) · Cited by 729
Proceedings of the 15th International Modal Analysis Conference
Vol., P. S. (1997) · Cited by 683
Wavelet-Based Approach for Structural Damage Detection
Hou, Z., Noori, M., & Amand, R. S. (2000) · Journal of Engineering Mechanics · doi:10.1061/(asce)0733-9399(2000)126:7(677 · Cited by 475
Hilbert-Huang Based Approach for Structural Damage Detection
Yang, J. N., Lei, Y., Lin, S., & Huang, N. (2004) · Journal of Engineering Mechanics · doi:10.1061/(asce)0733-9399(2004)130:1(85 · Cited by 359
Self-citationDamping in structures: its evaluation and treatment of uncertainty
Kareem, A., & Gurley, K. (1996) · Journal of Wind Engineering and Industrial Aerodynamics · doi:10.1016/0167-6105(96)00004-9 · Cited by 315
Feldman, M. (1994) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.1994.1011 · Cited by 314
NATURAL FREQUENCIES AND DAMPINGS IDENTIFICATION USING WAVELET TRANSFORM: APPLICATION TO REAL DATA
Ruzzene, M., Fasana, A., Garibaldi, L., & Piombo, B. (1997) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.1996.0078 · Cited by 276
IDENTIFICATION OF DAMPING IN MDOF SYSTEMS USING TIME-SCALE DECOMPOSITION
Staszewski, W. J. (1997) · Journal of Sound and Vibration · doi:10.1006/jsvi.1996.0864 · Cited by 267
NON-LINEAR FREE VIBRATION IDENTIFICATION VIA THE HILBERT TRANSFORM
Feldman, M. (1997) · Journal of Sound and Vibration · doi:10.1006/jsvi.1997.1182 · Cited by 147
Yang, J. N., Lei, Y., Pan, S., & Huang, N. E. (2003) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.288 · Cited by 125
Self-citationA BENCHMARK PROBLEM FOR STRUCTURAL HEALTH MONITORING AND DAMAGE DETECTION
Johnson, E. A., Lam, H., Katafygiotis, L. S., & Beck, J. L. (2001) · doi:10.1142/9789812811707_0028 · Cited by 98
Improvement of analytical dynamic models using complex modal test data
Liu, S. (1992) · International Journal of Mechanical Sciences · doi:10.1016/0020-7403(92)90045-i · Cited by 3
Structural Control: Past, Present, and Future
(1997) · doi:10.1061/(asce)0733-9399(1997)123:9(897
Cited by
Nagarajaiah, S. (2009) · Structural Control and Health Monitoring · doi:10.1002/stc.349 · Cited by 256
Algorithms for time synchronization of wireless structural monitoring sensors
Lei, Y., Kiremidjian, A. S., Nair, K. K., Lynch, J. P., & Law, K. H. (2005) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.432 · Cited by 50
Mu, H.-Q., & Yuen, K.-V. (2018) · Measurement · doi:10.1016/j.measurement.2018.08.022 · Cited by 49
Metadata
- Authors
- Yang, J. N., Lei, Y., Pan, S., & Huang, N.
- Venue
- Earthquake Engineering & Structural Dynamics
- Publisher
- Wiley
- Published
- 2003-05-09
- Volume
- 32
- Issue
- 9
- Pages
- 1443-1467
- ISSN
- 0098-8847 (ISSN-L)
- 1096-9845
- OpenAlex
- W2127583003
- Cited by
- 317
- References
- 15
- FWCI
- 62.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.