CoChat

Design of multiple tuned mass dampers by using a numerical optimizer

Open access
Hoang, Nam, Warnitchai, Pennung · 2005 · Earthquake Engineering & Structural Dynamics
Cited by 152

The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.

Abstract

A new method to design multiple tuned mass dampers (multiple TMDs) for minimizing excessive vibration of structures has been developed using a numerical optimizer. It is a very powerful method by which a large number of design variables can be effectively handled without imposing any restriction before the analysis. Its framework is highly flexible and can be easily extended to general structures with different combinations of loading conditions and target controlled quantities. The method has been used to design multiple TMDs for SDOF structures subjected to wide-band excitation. Some novel results have been obtained. To reduce displacement response of the structure, the optimally designed multiple TMDs have distributed natural frequencies and distinct damping ratios at low damping level. The obtained optimal configuration of TMDs was different from the earlier analytical solutions and was proved to be the most effective. A robustness design of multiple TMDs has also been presented. Robustness is defined as the ability of TMDs to function properly despite the presence of uncertainties in the parameters of the system. Numerical examples of minimizing acceleration structural response have been given where the system parameters are uncertain and are modeled as independent normal variates. It was found that, in case of uncertainties in the structural properties, increasing the TMD damping ratios along with expanding the TMD frequency range make the system more robust. Meanwhile, if TMD parameters themselves are uncertain, it is necessary to design TMDs for higher damping ratios and a narrower frequency range. Copyright © 2004 John Wiley & Sons, Ltd.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1002/eqe.413

Cites

5 of 5 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Research works printed but not linked: 15

  1. . Mechanical Vibrations; 4th edn. McGraw-Hill: New York, 1956.
  2. Warburton, 1980, Earthquake Engineering and Structural Dynamics, 8, 197, 10.1002/eqe.4290080302 · DOI · Paper page
  3. Warburton, 1982, Earthquake Engineering and Structural Dynamics, 10, 381, 10.1002/eqe.4290100304 · DOI · Paper page
  4. , . Wide-band response characteristics of multiple subsystems with high modal density. Proceedings of the 2nd International Conference on Stochastic Structural Dynamics, Florida, USA, 1990.
  5. , . Applied Optimal Control. Hemisphere Publishing: Washington DC, 1975.
  6. Bartels, 1972, Communications of the ACM, 15, 820, 10.1145/361573.361582 · DOI · Paper page
  7. Fox, 1968, AIAA Journal, 6, 2426, 10.2514/3.5008 · DOI · Paper page
  8. . Engineering Optimization; 3rd edn. Wiley: New York, 1996.
  9. Jangid, 1995, Structural Engineering and Mechanics, 3, 497, 10.12989/sem.1995.3.5.497 · DOI · Paper page
  10. Jangid, 1999, Earthquake Engineering and Structural Dynamics, 28, 1041, 10.1002/(SICI)1096-9845(199909)28:9<1041::AID-EQE853>3.0.CO;2-E · doi:10.1002/(sici)1096-9845(199909)28:9<1041::aid-eqe853>3.0.co;2-e
  11. , . Random Vibration in Mechanical Engineering. Academic Press: New York, 1963.
  12. Igusa, 1988, Journal of Engineering Mechanics, 114, 812, 10.1061/(ASCE)0733-9399(1988)114:5(812) · doi:10.1061/(asce)0733-9399(1988)114:5(812
  13. , . Probability Concepts in Engineering Planning and Design; Volume I: Basic Principles. Wiley: New York, 1975.
  14. Levine, 1970, IEEE Transactions on Automatic Control, AC-15, 44, 10.1109/TAC.1970.1099363 · DOI · Paper page
  15. Xu, 1994, Journal of Guidance, Control, and Dynamics, 17, 929, 10.2514/3.21292 · doi:10.2514/3.21292

Cited by

See all 152

Metadata

Authors
Hoang, N., & Warnitchai, P.
Venue
Earthquake Engineering & Structural Dynamics
Publisher
Wiley
Published
2005
Volume
34
Issue
2
Pages
125-144
ISSN
  • 0098-8847 (ISSN-L)
  • 1096-9845
OpenAlex
W2124678239
Cited by
152
References
5
FWCI
14.49
Type
journal article
Language
en
Open access
bronze
Licence
doi.wiley.com/10.1002/tdm_license_1.1 (tdm, 3895 d)

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.