Design formulas for tuned mass dampers based on A perturbation technique
The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
Modal properties of tuned mass damper (TMD)‐structure two‐degree‐of‐freedom (2DOF) linear systems are studied employing a perturbation technique. Using the perturbation solutions, formulas relevant to designing the TMD for various types of loading are obtained; they are expressed as a function of mass ratio, tuning ratio, damping ratio of the TMD and damping ratio of the structure. Equivalent additional dampings of the structure due to the TMD are derived for random and harmonic forces. Matched expressions of equivalent damping, which are valid for detuned, i.e. non‐optimal, conditions are also presented. The stability boundary of TMD‐structure systems subject to linear self‐excited forces is derived in a closed form. Using the perturbation solutions, procedures for optimizing the TMD parameters for various types of loading are explained and the optimal values are derived. The formulas obtained in this study can be used with good accuracy for mass ratios less than 0.02.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
BISHOP, R. E. D. (1957) · Nature · doi:10.1038/179504a0 · Cited by 1,636
Optimum absorber parameters for various combinations of response and excitation parameters
Warburton, G. B. (1982) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.4290100304 · Cited by 1,043
Random Vibration in Mechanical Systems
(1963) · Elsevier eBooks · doi:10.1016/c2013-0-12506-8 · Cited by 899
Optimum absorber parameters for simple systems
Warburton, G. B., & Ayorinde, E. O. (1980) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.4290080302 · Cited by 368
Dynamic Characterization of Two‐Degree‐of‐Freedom Equipment‐Structure Systems
Igusa, T., & Der Kiureghian, A. (1985) · Journal of Engineering Mechanics · doi:10.1061/(asce)0733-9399(1985)111:1(1 · Cited by 134
Random Vibration of Mechanical Systems
Piszczek, K., Nizioł, J., & Beards, C. F. (1986) · Medical Entomology and Zoology · Cited by 49
The optimization of mechanical dampers to control self-excited galloping oscillations
Rowbottom, M. D. (1981) · Journal of Sound and Vibration · doi:10.1016/0022-460x(81)90442-9 · Cited by 45
APPROXIMATE EXPLICIT FORMULAS FOR COMPLEX MODES OF TWO-DEGREE-OF-FREEDOM (2DOF) SYSTEM
Pacheco, B. M., & Fujino, Y. (1989) · Doboku Gakkai Ronbunshu · doi:10.2208/jscej.1989.404_213 · Cited by 4
Self-citationA Study on High-speed Intermittent Motion Mechanism
Kamiya, Y., & Takano, M. (1977) · Journal of the Japan Society of Precision Engineering · doi:10.2493/jjspe1933.43.1075 · Cited by 3
Research works printed but not linked: 4
- Aleksandrov A. D., 1963, Mathematics—its Contents, Methods, and Meanings;, 266
- Horiuchi H., 1991, Practical formulas for estimating design parameters of TMD, J. struct. eng. JSCE (in Japanese), 37, 781
- Nayfeh A. H., 1973, Perturbation Methods, 110
- Ikeda T., 1973, On suppression of self‐excited vibration by means of the TMD, Proc. JSME (in Japanese), 43, 2551
Cited by
Items 101–200 of 308
Tuned Mass Dampers for Structures with Bilinear Hysteresis
Abé, M. (1996) · Journal of Engineering Mechanics · doi:10.1061/(asce)0733-9399(1996)122:8(797 · Cited by 28
Self-citationOptimal design of wind-induced vibration control of tall buildings and high-rise structures
Li, Q. S., Cao, H., Li, G., Li, S., & Liu, D. (1999) · Wind and Structures · doi:10.12989/was.1999.2.1.069 · Cited by 27
Optimum Three-Element Tuned Mass Damper for Damped Main Structures under Ground Acceleration
Araz, O. (2021) · El-Cezeri Fen ve Mühendislik Dergisi · doi:10.31202/ecjse.913901 · Cited by 26
OPTIMIZATION OF NON-TRADITIONAL TUNED MASS DAMPER FOR DAMPED STRUCTURES UNDER HARMONIC EXCITATION
Araz, O., & Kahya, V. (2021) · Uludağ University Journal of The Faculty of Engineering · doi:10.17482/uumfd.878114 · Cited by 26
Tao, T., Wang, H., Yao, C., & He, X. (2017) · Applied Sciences · doi:10.3390/app7040395 · Cited by 26
“TMD is a classical device with a mass, a spring and a damper attached to attenuate undesirable vibrations of engineering structures [25].”
BackgroundChen, B., Zhang, Z., & Hua, X. (2022) · Structural Control and Health Monitoring · doi:10.1002/stc.3106 · Cited by 23
Kohl, A. M., Clement, K.-D., Schneider, J., Firus, A., & Lombaert, G. (2023) · Engineering Structures · doi:10.1016/j.engstruct.2022.115555 · Cited by 23
Robust Design Strategy for Multiple Tuned Mass Dampers with Consideration of Frequency Bandwidth
Lin, C., Lin, G., & Chiu, K.-C. (2017) · International Journal of Structural Stability and Dynamics · doi:10.1142/s021945541750002x · Cited by 23
Chen, X., Li, A., Zhang, Z., Hu, L., Sun, P., Fan, Z., & Liu, X. (2020) · The Structural Design of Tall and Special Buildings · doi:10.1002/tal.1704 · Cited by 23
Jokić, M., Stegić, M., & Butković, M. (2011) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2011.06.005 · Cited by 23
Dynamic performance of bridges and vehicles under strong wind
Chen, S. (2004) · Louisiana State University · doi:10.31390/gradschool_dissertations.1949 · Cited by 23
“When white noise excitation was assumed, the root- mean-square (RMS) ratio between the controlled and uncontrolled vibrations was derived as (Fujino and Abe 1993):”
MethodInfluentialMatsuoka, K., TSUNEMOTO, M., & TOKUNAGA, M. (2022) · Engineering Structures · doi:10.1016/j.engstruct.2022.114099 · Cited by 22
Yu, H., Øiseth, O. A., Zhang, M., Xu, F., & Hu, G. (2023) · Journal of Bridge Engineering · doi:10.1061/jbenf2.beeng-5958 · Cited by 21
Wu, Y., Zhao, M., Gao, Z., & Du, X. (2023) · Journal of Building Engineering · doi:10.1016/j.jobe.2023.107685 · Cited by 20
Wu, T., Zhang, M., Peng, R.-X., & Yu, H. (2024) · Ocean Engineering · doi:10.1016/j.oceaneng.2024.118909 · Cited by 20
Combined analytical and numerical approaches in Dynamic Stability analyses of engineering systems
Náprstek, J. (2014) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2014.06.029 · Cited by 20
Araz, O., Çakir, T., & Öztürk, K. F. (2022) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-022-03895-z · Cited by 19
Warnitchai, P., & Hoang, N. (2006) · Smart Structures and Systems · doi:10.12989/sss.2006.2.1.001 · Cited by 19
Tuned mass dampers for torsionally coupled systems
Pansare, A. P., & Jangid, R. S. (2003) · Wind and Structures · doi:10.12989/was.2003.6.1.023 · Cited by 18
Wang, W., Yu, T., Yang, Z., Chen, S., Hua, X., & Yang, O. (2023) · Journal of Structural Engineering · doi:10.1061/jsendh.steng-12312 · Cited by 18
Response control of tension leg platform with passive damper: experimental investigations
Chandrasekaran, S., Kumar, D., & Ramanthan, R. (2016) · Ships and Offshore Structures · doi:10.1080/17445302.2015.1119666 · Cited by 18
“Other researchers showed the applicability of the passive and active control techniques for reducing the effects of dynamic excitations on TLPs (Ahmad and Ahmad 1999; Alves and Batista 1999; Fujino and Abe 1993).”
BackgroundInfluentialEffective Mass of Tuned Mass Dampers
Tophøj, L., Grathwol, N., & Hansen, S. O. (2018) · Vibration · doi:10.3390/vibration1010014 · Cited by 18
“A good overview of various optimization rules can be found in [11].”
BackgroundRoy, A., Ghosh, A. D., & Chatterjee, S. (2016) · Structural Control and Health Monitoring · doi:10.1002/stc.1924 · Cited by 18
An adaptive pendulum for evolving structures
Mekki, O. B., Bourquin, F., Maceri, F., & Phu, C. N. V. (2011) · Structural Control and Health Monitoring · doi:10.1002/stc.422 · Cited by 18
Rule-Based Control Algorithm for Active Tuned Mass Dampers
Abé, M. (1996) · Journal of Engineering Mechanics · doi:10.1061/(asce)0733-9399(1996)122:8(705 · Cited by 18
Self-citationPassive and Semi-Active Tuned Mass Damper Building Systems.
Chey, M. (2007) · UC Research Repository (University of Canterbury) · doi:10.26021/2569 · Cited by 18
Asymptotic analysis of multiple mode structures equipped with multiple tuned mass dampers
Mayou, A., & Denoël, V. (2022) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2022.117104 · Cited by 17
“[10] N. Hoang, Y. Fujino, and P. Warnitchai.”
BackgroundMethodResultInfluentialXie, R., Xu, K., Kang, H., & Zhao, L. (2024) · Journal of Infrastructure Intelligence and Resilience · doi:10.1016/j.iintel.2024.100123 · Cited by 17
Optimal design of a pair of vibration suppression devices for a multi‐storey building
Zhang, S. Y., Neild, S. A., & Jiang, J. Z. (2019) · Structural Control and Health Monitoring · doi:10.1002/stc.2498 · Cited by 17
“The admittance functions Y(s) obtained in (3) will be used to derive the objective function J∞ for optimisation.”
MethodFree Parameter Optimization of DTMDs Based on Improved Hybrid Genetic-Simulated Annealing Algorithm
Han, Q., Zhang, X., Xu, K., & Du, X. (2020) · International Journal of Structural Stability and Dynamics · doi:10.1142/s0219455420500315 · Cited by 17
Significance of non-classical damping in seismic qualification of equipment and piping
Gupta, A., & Bose, M. K. (2017) · Nuclear Engineering and Design · doi:10.1016/j.nucengdes.2017.03.020 · Cited by 17
Pozos‐Estrada, A., & HONG, H. P. (2015) · Latin American Journal of Solids and Structures · doi:10.1590/1679-78251856 · Cited by 17
“Several recommendations have been given to determine the optimum parameters of the TMD as a function of the mass ratio (Den Hartog, 1956; Tsai and Lin, 1983; Fujino and Abe, 1993; Vickery et al., 2001).”
BackgroundOptimal variables of TMDs for multi-mode buffeting control of long-span bridges
Chen, S., Cai, C. S. S., Gu, M., & Chang, C. C. (2003) · Wind and Structures · doi:10.12989/was.2003.6.5.387 · Cited by 17
“If only a single-mode-based vibration is considered, the optimal frequency of TMDs at wind velocity 30 m/s can be obtained with formulas by Fujino and Abe (1993) as: Fig. 5 Variation of modal properties for Humen Suspension Bridge with wind speed”
BackgroundMethodInfluentialEfficiency of vibrational energy dissipation by tuned rolling-cylinder dampers
Tsuda, R., & SAEKI, M. (2019) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2019.114977 · Cited by 16
Wang, X., Yang, B., Hu, Y., & Gao, Y. (2017) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2017.01.042 · Cited by 16
Anh, N. D., & Nguyen, N. X. (2016) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-016-0113-x · Cited by 16
Optimal placement of DVFC controllers on buildings subjected to earthquake loading
Abdullah, M. M. (1999) · Earthquake Engineering & Structural Dynamics · doi:10.1002/(sici)1096-9845(199902)28:2<127::aid-eqe807>3.0.co;2-b · Cited by 16
Coupling ATMD System for Seismic Response Control of Two Adjacent Buildings
Park, K.-S., & Ok, S. (2019) · Shock and Vibration · doi:10.1155/2019/2060623 · Cited by 15
Optimal Performance of the TLCD in Structural Pitching Vibration Control
Xue, S. D., Ko, J. M., & Xu, Y. L. (2002) · Journal of Vibration and Control · doi:10.1177/1077546029287 · Cited by 15
“Gao et al. (1997) presented numerical analyses for seeking the optimum parameters of the tuned liquid column damper for maximum reduction of peak structural response to harmonic excitation over a wide frequency range.”
BackgroundMethodChen, X., Kareem, A., Xu, G., Wang, H., Sun, Y., & Hu, L. (2021) · Wind Energy · doi:10.1002/we.2623 · Cited by 15
Hsueh, W. (2000) · Journal of Sound and Vibration · doi:10.1006/jsvi.1999.2529 · Cited by 15
Soto, M. G. (2012) · OhioLink ETD Center (Ohio Library and Information Network) · Cited by 14
A novel tuned mass-conical spring system for passive vibration control of a variable mass structure
Chakraborty, S., Ghosh, A. D., & Chaudhuri, S. R. (2021) · Journal of Vibration and Control · doi:10.1177/10775463211000497 · Cited by 14
“In either case, the TMD performance is highly sensitive to the accuracy of tuning (Fujino and Abe, 1993; Sadek et al., 1997).”
BackgroundOptimal performance design of bi-Tuned Mass Damper systems using multi-objective optimization
Ok, S., Song, J., & Park, K.-S. (2008) · KSCE Journal of Civil Engineering · doi:10.1007/s12205-008-0313-8 · Cited by 14
“Accordingly, many researchers have investigated the behaviors and characteristics of TMD systems, and several design formulas on the optimal parameters of the TMDs have been proposed for different types of excitations (Warburton and Ayorinde, 1980; Warburton, 1981; Rowbottom, 1981; Warburton, 1982; Yamaguchi, 1991; Fu…”
BackgroundRahman, M. M., Nahar, T. T., & Kim, D. (2021) · Buildings · doi:10.3390/buildings11020074 · Cited by 13
“Frequency Ratio (γopt) Damping Ratio,(ξopt) Krenk and Høgsberg [8] 11+µ 1 2 √ µ 1+µ Rüdinger [9] √ 2+µ 2(1+µ)2 √ µ(4+3µ) 4(1+µ)3 Fujino and Abé [10] √ 1−0.5µ 1+µ 1 2 √ µ(1+3µ/4) (1+µ)(1+0.5µ) Warburton [12] √ 1−0.5µ 1+µ √ µ(1−µ/4) 4(1+µ)(1−0.5µ) Den Hartog [11] 11+µ √ 3µ 8(1+µ)3 The most effective optimum values of γo…”
MethodInfluentialAn improved multi-mode seismic vibration control method using multiple tuned mass dampers
Zhang, X., Han, Q., Bi, K., & Du, X. (2022) · Advances in Structural Engineering · doi:10.1177/13694332211050977 · Cited by 13
“Moreover, the robustness of an STMD system is poor, and the control system loses its control effectiveness completely when the STMD system is malfunction (Fujino and Abé, 1993; Iwanami and Seto, 1984; Joshi and Jangid, 1997).”
BackgroundTuned mass damper asymmetric coupling system for vibration control of adjacent twin buildings
Ok, S. (2019) · Advances in Structural Engineering · doi:10.1177/1369433219886452 · Cited by 13
“Although various design formulas (Den Hartog, 1956; Fujino and Abé, 1993; Sadek et al., 1997) have their own advantages and somewhat differ in performance depending on the specific problem, this study adopted Den Hartog’s (1956) design formula for ICS since it is most widely used for the independent TMD system.”
MethodInfluentialLou, W., Wen, Z., Chen, Y., & Huang, M. (2019) · Applied Sciences · doi:10.3390/app9152978 · Cited by 12
Use of TLD and MTLD for control of wind-induced vibration of tall buildings
Kim, Y.-M., You, K.-P., Ko, N., & Yoon, S. W. (2006) · Journal of Mechanical Science and Technology · doi:10.1007/bf02915957 · Cited by 12
Mohtat, A., Yousefi‐Koma, A., & Dehghan-Niri, E. (2010) · International Journal of Structural Stability and Dynamics · doi:10.1142/s0219455410003592 · Cited by 12
Active control of inelastic structural response during earthquakes
Wong, K. K. F., & Hart, G. C. (1997) · The Structural Design of Tall Buildings · doi:10.1002/(sici)1099-1794(199706)6:2<125::aid-tal84>3.0.co;2-g · Cited by 12
Models of a standing human body in structural vibration
Zhang, Q. (2013) · Research Explorer (The University of Manchester) · Cited by 12
Wu, Y., Yao, D., Wu, L., Gao, Z., & Mi, Z. (2024) · Soil Dynamics and Earthquake Engineering · doi:10.1016/j.soildyn.2024.108937 · Cited by 11
Optimum Design of Tuned Mass Dampers for Structures with Torsional Irregularity via Jaya Algorithm
Mubuli, A., Nigdeli, S. M., & Bekdaş, G. (2023) · Journal of Vibration Engineering & Technologies · doi:10.1007/s42417-023-00979-5 · Cited by 11
Patsialis, D., Taflanidis, A. A., & Giaralis, A. (2023) · Engineering Structures · doi:10.1016/j.engstruct.2023.115811 · Cited by 11
Flaviis, A. D., Savadkoohi, A. T., & Zulli, D. (2024) · European Journal of Mechanics - A/Solids · doi:10.1016/j.euromechsol.2024.105552 · Cited by 11
Wang, H., Tao, T., Cheng, H., & Li, A. (2014) · Journal of Zhejiang University. Science A · doi:10.1631/jzus.a1400194 · Cited by 11
“The optimum parameters’ analyses of the TMD for vibration control of systems under external forces have been effectively conducted (Den Hartog, 1956; Fujino and Abe, 1993; Rüdinger, 2006; Marano et al., 2007; 2010; Hoang et al., 2008; Marano and Greco, 2011).”
BackgroundSeismic resilience enhancement of MDOF systems utilizing a hybrid TMD-TLD
Pandit, A. R., Malekjafarian, A., Farsangi, E. N., & Panda, S. (2022) · Bulletin of Earthquake Engineering · doi:10.1007/s10518-022-01531-8 · Cited by 11
“Fujino and Abe (1993) studied the efficiency of a passive TMD under harmonic force and found that by using a 2% mass ratio, they can minimize the structural vibrations effectively.”
BackgroundA simple method to design and analyze dynamic vibration absorber using dimensional analysis
Karimi, M., Shemshadi, M., & Firoozfam, N. (2020) · Journal of Vibration and Control · doi:10.1177/1077546320923928 · Cited by 11
“It includes research works carried out by Fujino and Abe (1993), Rana and Soong (1998), and Hoang et al. (2008) to name a few.”
Wind-Induced Response and Its Controlling of Long-Span Cross-Rope Suspension Transmission Line
Li, Z., Hu, Y., & Xi, T. (2022) · Applied Sciences · doi:10.3390/app12031488 · Cited by 11
Hu, Z., Legeza, V. P., Dychka, I. A., & Legeza, D. V. (2017) · International Journal of Intelligent Systems and Applications · doi:10.5815/ijisa.2017.03.03 · Cited by 10
“the mass of the working of the absorber body, stiffening elements of its accession to the supporting entity and the level of damping vibrations of the working body of the absorber relative to the carrier of the object) in different productions for virtually all kinds of external influences are well established [2 - 5,…”
BackgroundVibration Mitigation of Rail Noise Barriers by Hysteretic Absorbers
Basili, M., Casini, P., Morelli, L., & Vestroni, F. (2020) · DOAJ (DOAJ: Directory of Open Access Journals) · doi:10.22055/jacm.2020.32360.2044 · Cited by 10
“Following the Den Hartog viscoelastic tuned mass damper (VTMD), other researchers proposed later many different alternatives of attachments and design approaches, fundamentally employing linear elements [13-16], introducing different optimization criteria [17, 18], even with attention to the specific loading condition…”
BackgroundMethodWang, X., & Wang, D. (2021) · Journal of Vibration Engineering & Technologies · doi:10.1007/s42417-021-00320-y · Cited by 10
Consideration of uncertainties in seismic analysis of coupled building piping systems
Gupta, A., & Choi, B. (2005) · Nuclear Engineering and Design · doi:10.1016/j.nucengdes.2005.05.013 · Cited by 10
Vibration Control of Structures With Closely Spaced Frequencies by a Single Actuator
Abe, M. (1998) · Journal of vibration and acoustics · doi:10.1115/1.2893793 · Cited by 10
Utilização de amortecedores de massas sintonizadas no controlo de vibrações em estruturas
Paredes, M. M. (2008) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT) · doi:10.34626/r5ay-s610 · Cited by 10
Optimization of column-in-column system based on non-conventional TMD concept
Fang, X., Hao, H., Bi, K., Song, J. G., Cao, Y., & Chen, Z. (2024) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2024.109497 · Cited by 9
Sarkar, N., & Ghosh, A. D. (2024) · Ocean Engineering · doi:10.1016/j.oceaneng.2024.119352 · Cited by 9
Rahman, S., Jain, A. K., Jha, K. N., Bharti, S. D., & DATTA, T. K. (2024) · Structures · doi:10.1016/j.istruc.2024.107526 · Cited by 9
Design of Multi-Degree-of-Freedom Tuned-Mass Dampers Based on Eigenvalue Perturbation
Verdirame, J. M., & Nayfeh, S. A. (2003) · AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference (SDM) · doi:10.2514/6.2003-1686 · Cited by 9
Galloping Control for Iced Conductors Using Tuned Mass Dampers with Fixed Time‐Delayed Feedback
Guo, L., Li, L., & Zhu, P. (2019) · Shock and Vibration · doi:10.1155/2019/4823457 · Cited by 9
Analytical Solutions for DVA Optimization Based on the Lyapunov Equation
Du, D. (2008) · Journal of vibration and acoustics · doi:10.1115/1.2948373 · Cited by 9
Xie, R., Calayir, M., Mercan, O., & Zhao, L. (2026) · Engineering Structures · doi:10.1016/j.engstruct.2026.122529 · Cited by 8
Identification of beneficial mass-included inerter-based vibration suppression configurations
Li, Y., Zhang, S. Y., Jiang, J. Z., & Neild, S. A. (2019) · Journal of the Franklin Institute · doi:10.1016/j.jfranklin.2019.04.011 · Cited by 8
“To maximize energy dissipation, the tuning method of choosing the damping ratio of the TMD was proposed by Den Hartog [4], which was then refined by others [5, 6, 7, 8].”
MethodDYNAMIC BEHAVIOR OF STEEL FRAMES WITH TUNED MASS DAMPERS
Hosseini, M., Jouneghani, K. T., Rohanimanesh, M. S., & Dehkordi, M. R. (2017) · Advances in Science and Technology – Research Journal · doi:10.12913/22998624/70763 · Cited by 8
“Although the main types of structural control are active and passive systems, usage of the passive system is more common due to economic and physical conditions [11].”
BackgroundOptimisation fiabiliste des structures : méthodes et applications au contrôle des vibrations
Yu, H. (2011) · theses.fr (ABES) · doi:10.70675/32df552bz9153z4486za71ez20b264ef415a · Cited by 8
Phuc, V. D., Tran, V.-T., & Quyền, N. V. (2018) · Proceedings of the Institution of Mechanical Engineers Part K Journal of Multi-body Dynamics · doi:10.1177/1464419318779339 · Cited by 7
Coupled Vibration Control of Tuned Mass Damper in Both Horizontal and Torsional Direction
He, H. X., Han, E., & Lv, Y. W. (2014) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.578-579.1000 · Cited by 7
Optimal Control of Structures under Earthquakes Including Soil-Structure Interaction
Özuygur, A. R., & Gündüz, A. N. (2017) · Journal of Earthquake Engineering · doi:10.1080/13632469.2016.1277567 · Cited by 7
Pennisi, G. (2016) · theses.fr (ABES) · doi:10.70675/0126d46dzba2dz4ef8zb37dz30992d42836a · Cited by 7
Roozbahan, M., & Turan, G. (2024) · Asian Journal of Civil Engineering · doi:10.1007/s42107-024-01103-y · Cited by 6
“Fujino and Abe (1993) As a second comparison among the seven analytical methods, the average percent reductions in the maximum inter-story drift for the structure under all far-field and near-field earthquakes are presented in Tables 8 and 9, respectively, for each type of soil.”
Pappalardo, C. M., Isola, G., Donadio, A., Regina, R. L., Berardi, V. P., & Guida, D. (2025) · Dynamics · doi:10.3390/dynamics5020019 · Cited by 6
Experimental study and numerical simulation of inerter-based systems
Zheng, Y., & Li, L. (2022) · Journal of Vibration and Control · doi:10.1177/10775463211057354 · Cited by 6
“Common energy absorption devices are tuned mass dampers (TMDs) (Fujino and Abé, 2010) and tuned liquid dampers (TLDs) (Ruiz et al.”
BackgroundConception et optimisation d'amortisseurs à masse accordée pour les structures du génie civil
Allani, A. (2015) · theses.fr (ABES) · doi:10.70675/50e41dd6z4203z4b4aza20fzd106854b8cf6 · Cited by 6
“Les paramètres adimensionnels ont été trouvés par Fujino [105] dans le cas de la vibration libre.”
BackgroundInfluentialPhysics‐Informed Neural Network–Based TMD Parameter Identification and Response Prediction
Zhang, Z., Lin, D.-W., Sun, C., & Sun, Z. H. (2025) · Structural Control and Health Monitoring · doi:10.1155/stc/2157493 · Cited by 5
Zhang, M., Lu, H., Xu, F., & Wang, M. (2026) · Journal of Structural Engineering · doi:10.1061/jsendh.steng-15935 · Cited by 5
Passive Flutter Suppression Using a Nonlinear Tuned Vibration Absorber
Habib, G., & Kerschen, G. (2015) · Conference proceedings of the Society for Experimental Mechanics · doi:10.1007/978-3-319-15221-9_11 · Cited by 5
“References [17, 18] provide simple rules to properly tune the LTVA parameters, while references [20, 21] study the post-bifurcation behavior of the coupled system.”
MethodExperimental study of the semi-active mass damper under impulse excitation
Wang, X., Wang, D., Xu, Z., Wang, T., Fu, G., & Lu, C. (2022) · Review of Scientific Instruments · doi:10.1063/5.0080602 · Cited by 5
Wang, X., Xu, Z., & Wang, D. (2021) · Review of Scientific Instruments · doi:10.1063/5.0064328 · Cited by 5
Shape Memory Alloy-Tuned Mass Damper (SMA-TMD) for Seismic Vibration Control
Bhowmick, S., & Mishra, S. K. (2014) · Springer eBooks · doi:10.1007/978-81-322-2193-7_108 · Cited by 5
Dynamic response analysis of generally damped linear system with repeated eigenvalues
Yu, R., Zhou, X., & Yuan, M.-Q. (2012) · STRUCTURAL ENGINEERING AND MECHANICS · doi:10.12989/sem.2012.42.4.449 · Cited by 5
“Igusa et al. (1984) studied the stationary response of multi-degreesof-freedom (MDOF) non-classically damped linear systems subjected to stationary input excitations. Veletsos and Ventura (1986) presented a critical review of the modal superposition method of evaluating the dynamic response of non-classically damped s…”
BackgroundInfluentialIbrahim, R. A. (2005) · Cambridge University Press eBooks · doi:10.1017/cbo9780511536656.007 · Cited by 5
Vibration Control of Spatial Structures using Spatially Distributed MTMDs
Yoshinaka, S., & Kawaguchi, K. (2008) · Institutional Repositories DataBase (IRDB) · Cited by 5
Application of linear quadratic regulator (LQR) in displacement control of an active mass damper
Jalili-Kharaajoo, M., Nikouseresht, Y., Mohebbi, A., Moshiri, B., & Ashari, A. E. (2004) · The proceedings of the IEEE Conference on Control Applications/The proceedings of the ... IEEE Conference on Control Applications · doi:10.1109/cca.2003.1223532 · Cited by 5
Incorporating Active Control of Human-Induced Vibrations in Floors into Buildings
Hudson, E. (2013) · White Rose eTheses Online (University of Leeds, The University of Sheffield, University of York) · Cited by 5
Mayou, A., & Denoël, V. (2024) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2024.118474 · Cited by 4
Wang, J., Zhang, Y., Geng, Z., & Looi, D. T.-W. (2024) · International Journal of Structural Stability and Dynamics · doi:10.1142/s0219455425501627 · Cited by 4
Liu, X., Qu, Z., Huang, Y., & Akira, W. A. D. A. (2023) · Advances in Structural Engineering · doi:10.1177/13694332221149500 · Cited by 4
Modeling and experimental validation of a new electromechanical damping device
Caruso, G., Mekki, O. B., & Bourquin, F. (2009) · HAL · Cited by 4
Rathi, A. K., & Chakraborty, A. (2014) · Springer eBooks · doi:10.1007/978-81-322-2193-7_115 · Cited by 4
Metadata
- Authors
- Fujino, Y., & Abé, M.
- Affiliations
- The University of Tokyo (JP)
- Northwestern University (US)
- ORCID
- Fujino, Yozo
- Venue
- Earthquake Engineering & Structural Dynamics
- Publisher
- Wiley
- Published
- 1993-10
- Volume
- 22
- Issue
- 10
- Pages
- 833-854
- ISSN
- 0098-8847 (ISSN-L)
- 1096-9845
- OpenAlex
- W2142556710
- Cited by
- 276
- References
- 9
- Citations by year
- 2026: 11 · 2025: 9 · 2024: 23 · 2023: 15 · 2022: 16 · 2021: 13 · 2020: 8 · 2019: 13 · 2018: 9 · 2017: 11 · 2016: 10 · 2015: 9 · 2014: 10 · 2013: 10 · 2012: 6
- FWCI
- 11.57
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Earthquake Engineering & Structural Dynamics (publishedVersion)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Vibration Control and Rheological Fluids
- Physical Sciences › Engineering › Mechanical Engineering › Vibration and Dynamic Analysis
- Physical Sciences › Engineering › Civil and Structural Engineering › Structural Engineering and Vibration Analysis
- Keywords
- tuned mass damper, perturbation method, two-degree-of-freedom system, modal properties, equivalent damping, random loading, harmonic loading, self-excited forces, stability boundaries, TMD parameter optimization, mass ratio, damping ratio, detuning
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.