Design formulas for tuned mass dampers based on A perturbation technique
The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
Modal properties of tuned mass damper (TMD)‐structure two‐degree‐of‐freedom (2DOF) linear systems are studied employing a perturbation technique. Using the perturbation solutions, formulas relevant to designing the TMD for various types of loading are obtained; they are expressed as a function of mass ratio, tuning ratio, damping ratio of the TMD and damping ratio of the structure. Equivalent additional dampings of the structure due to the TMD are derived for random and harmonic forces. Matched expressions of equivalent damping, which are valid for detuned, i.e. non‐optimal, conditions are also presented. The stability boundary of TMD‐structure systems subject to linear self‐excited forces is derived in a closed form. Using the perturbation solutions, procedures for optimizing the TMD parameters for various types of loading are explained and the optimal values are derived. The formulas obtained in this study can be used with good accuracy for mass ratios less than 0.02.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
BISHOP, R. E. D. (1957) · Nature · doi:10.1038/179504a0 · Cited by 1,636
Optimum absorber parameters for various combinations of response and excitation parameters
Warburton, G. B. (1982) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.4290100304 · Cited by 1,043
Random Vibration in Mechanical Systems
(1963) · Elsevier eBooks · doi:10.1016/c2013-0-12506-8 · Cited by 899
Optimum absorber parameters for simple systems
Warburton, G. B., & Ayorinde, E. O. (1980) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.4290080302 · Cited by 368
Dynamic Characterization of Two‐Degree‐of‐Freedom Equipment‐Structure Systems
Igusa, T., & Der Kiureghian, A. (1985) · Journal of Engineering Mechanics · doi:10.1061/(asce)0733-9399(1985)111:1(1 · Cited by 134
Random Vibration of Mechanical Systems
Piszczek, K., Nizioł, J., & Beards, C. F. (1986) · Medical Entomology and Zoology · Cited by 49
The optimization of mechanical dampers to control self-excited galloping oscillations
Rowbottom, M. D. (1981) · Journal of Sound and Vibration · doi:10.1016/0022-460x(81)90442-9 · Cited by 45
APPROXIMATE EXPLICIT FORMULAS FOR COMPLEX MODES OF TWO-DEGREE-OF-FREEDOM (2DOF) SYSTEM
Pacheco, B. M., & Fujino, Y. (1989) · Doboku Gakkai Ronbunshu · doi:10.2208/jscej.1989.404_213 · Cited by 4
Self-citationA Study on High-speed Intermittent Motion Mechanism
Kamiya, Y., & Takano, M. (1977) · Journal of the Japan Society of Precision Engineering · doi:10.2493/jjspe1933.43.1075 · Cited by 3
Research works printed but not linked: 4
- Aleksandrov A. D., 1963, Mathematics—its Contents, Methods, and Meanings;, 266
- Horiuchi H., 1991, Practical formulas for estimating design parameters of TMD, J. struct. eng. JSCE (in Japanese), 37, 781
- Nayfeh A. H., 1973, Perturbation Methods, 110
- Ikeda T., 1973, On suppression of self‐excited vibration by means of the TMD, Proc. JSME (in Japanese), 43, 2551
Cited by
Items 301–308 of 308
Akram, M., Ishtiaq, U., & Popa, I.-L. (2026) · Sound&Vibration · doi:10.59400/sv4685
“Design formulas obtained by a perturbation argument in the mass ratio were given by Fujino and Abe [26], while Verdirame and Nayfeh [27] developed a perturbation treatment of multi-degree-of-freedom absorber systems starting from a semisimple double eigenvalue.”
Flaviis, A. D. (n.d.) · Archivio Istituzionale della Ricerca - Università degli Studi dell Aquila
Zeoli, J. (2026) · EURODYN ... · doi:10.47964/1326.10684.136
Shaking table experiments and numerical analyses of clutch inerter damper devices
Zheng, Y., Zhang, T., & Li, L. (2026) · Earthquake Engineering and Engineering Vibration · doi:10.1007/s11803-026-2419-8
Wang, J., Hong, M., Zhang, Y., Ngui, H. J., Looi, D. T.-W., & Wu, Y. (2026) · Structures · doi:10.1016/j.istruc.2026.113484
Effectiveness of mass damper and composite mass damper for control of wind-excited vibration
Lewandowski, R., & Grzymisławska, J. (2005) · Archives of Civil Engineering
Restrained Stroke Active Tuned Mass Damper
Kwon, J. S., Chang, S.-P., & Yoo, H. (2005) · Journal of the Earthquake Engineering Society of Korea · doi:10.5000/eesk.2005.9.3.009
Efficacy of Tuned Mass Dampers for Bridge Flutter Control
(2003) · doi:10.1061/(asce)0733-9445(2003)129:10(1291
Metadata
- Authors
- Fujino, Y., & Abé, M.
- Affiliations
- The University of Tokyo (JP)
- Northwestern University (US)
- ORCID
- Fujino, Yozo
- Venue
- Earthquake Engineering & Structural Dynamics
- Publisher
- Wiley
- Published
- 1993-10
- Volume
- 22
- Issue
- 10
- Pages
- 833-854
- ISSN
- 0098-8847 (ISSN-L)
- 1096-9845
- OpenAlex
- W2142556710
- Cited by
- 276
- References
- 9
- Citations by year
- 2026: 11 · 2025: 9 · 2024: 23 · 2023: 15 · 2022: 16 · 2021: 13 · 2020: 8 · 2019: 13 · 2018: 9 · 2017: 11 · 2016: 10 · 2015: 9 · 2014: 10 · 2013: 10 · 2012: 6
- FWCI
- 11.57
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Earthquake Engineering & Structural Dynamics (publishedVersion)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Vibration Control and Rheological Fluids
- Physical Sciences › Engineering › Mechanical Engineering › Vibration and Dynamic Analysis
- Physical Sciences › Engineering › Civil and Structural Engineering › Structural Engineering and Vibration Analysis
- Keywords
- tuned mass damper, perturbation method, two-degree-of-freedom system, modal properties, equivalent damping, random loading, harmonic loading, self-excited forces, stability boundaries, TMD parameter optimization, mass ratio, damping ratio, detuning
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.