Design formulas for tuned mass dampers based on A perturbation technique
The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
Modal properties of tuned mass damper (TMD)‐structure two‐degree‐of‐freedom (2DOF) linear systems are studied employing a perturbation technique. Using the perturbation solutions, formulas relevant to designing the TMD for various types of loading are obtained; they are expressed as a function of mass ratio, tuning ratio, damping ratio of the TMD and damping ratio of the structure. Equivalent additional dampings of the structure due to the TMD are derived for random and harmonic forces. Matched expressions of equivalent damping, which are valid for detuned, i.e. non‐optimal, conditions are also presented. The stability boundary of TMD‐structure systems subject to linear self‐excited forces is derived in a closed form. Using the perturbation solutions, procedures for optimizing the TMD parameters for various types of loading are explained and the optimal values are derived. The formulas obtained in this study can be used with good accuracy for mass ratios less than 0.02.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
BISHOP, R. E. D. (1957) · Nature · doi:10.1038/179504a0 · Cited by 1,636
Optimum absorber parameters for various combinations of response and excitation parameters
Warburton, G. B. (1982) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.4290100304 · Cited by 1,043
Random Vibration in Mechanical Systems
(1963) · Elsevier eBooks · doi:10.1016/c2013-0-12506-8 · Cited by 899
Optimum absorber parameters for simple systems
Warburton, G. B., & Ayorinde, E. O. (1980) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.4290080302 · Cited by 368
Dynamic Characterization of Two‐Degree‐of‐Freedom Equipment‐Structure Systems
Igusa, T., & Der Kiureghian, A. (1985) · Journal of Engineering Mechanics · doi:10.1061/(asce)0733-9399(1985)111:1(1 · Cited by 134
Random Vibration of Mechanical Systems
Piszczek, K., Nizioł, J., & Beards, C. F. (1986) · Medical Entomology and Zoology · Cited by 49
The optimization of mechanical dampers to control self-excited galloping oscillations
Rowbottom, M. D. (1981) · Journal of Sound and Vibration · doi:10.1016/0022-460x(81)90442-9 · Cited by 45
APPROXIMATE EXPLICIT FORMULAS FOR COMPLEX MODES OF TWO-DEGREE-OF-FREEDOM (2DOF) SYSTEM
Pacheco, B. M., & Fujino, Y. (1989) · Doboku Gakkai Ronbunshu · doi:10.2208/jscej.1989.404_213 · Cited by 4
Self-citationA Study on High-speed Intermittent Motion Mechanism
Kamiya, Y., & Takano, M. (1977) · Journal of the Japan Society of Precision Engineering · doi:10.2493/jjspe1933.43.1075 · Cited by 3
Research works printed but not linked: 4
- Aleksandrov A. D., 1963, Mathematics—its Contents, Methods, and Meanings;, 266
- Horiuchi H., 1991, Practical formulas for estimating design parameters of TMD, J. struct. eng. JSCE (in Japanese), 37, 781
- Nayfeh A. H., 1973, Perturbation Methods, 110
- Ikeda T., 1973, On suppression of self‐excited vibration by means of the TMD, Proc. JSME (in Japanese), 43, 2551
Cited by
Liquid Sloshing Dynamics: Theory and Applications
Ibrahim, R. A. (2005) · Cambridge University Press eBooks · doi:10.1017/cbo9780511536656 · Cited by 1,528
Using an inerter‐based device for structural vibration suppression
Lazar, I. F., Neild, S. A., & Wagg, D. J. (2014) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.2390 · Cited by 799
“TMDs were discussed by Den Hartog in [33] (under the name of dynamic vibration absorbers) with tuning strategies proposed by him and others [34–38].”
MethodResearch developments in vibration control of structures using passive tuned mass dampers
Elias, S., & Matsagar, V. (2017) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2017.09.015 · Cited by 556
“Fujino and Abe (1993) obtained opimum parameters for the TMD with damped main system by erturbation technique.”
MethodDynamic characterization of multiple tuned mass dampers and some design formulas
Abé, M., & Fujino, Y. (1994) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.4290230802 · Cited by 329
Self-citationOptimal design theories and applications of tuned mass dampers
Lee, C.-L., Chen, Y.-T., Chung, L.-L., & Wang, Y.-P. (2006) · Engineering Structures · doi:10.1016/j.engstruct.2005.06.023 · Cited by 296
Optimization of tuned liquid column dampers
Gao, H., Kwok, K. C. S., & Samali, B. (1997) · Engineering Structures · doi:10.1016/s0141-0296(96)00099-5 · Cited by 289
Optimum parameters of tuned mass damper for damped main system
Bakre, S. V., & Jangid, R. S. (2007) · Structural Control and Health Monitoring · doi:10.1002/stc.166 · Cited by 256
Xu, K., Bi, K., Han, Q., Li, X., & Du, X. (2019) · Engineering Structures · doi:10.1016/j.engstruct.2018.12.067 · Cited by 211
Li, C. (2000) · Earthquake Engineering & Structural Dynamics · doi:10.1002/1096-9845(200009)29:9<1405::aid-eqe976>3.0.co;2-4 · Cited by 207
Minimax optimization of multi-degree-of-freedom tuned-mass dampers
Zuo, L., & Nayfeh, S. A. (2004) · Journal of Sound and Vibration · doi:10.1016/s0022-460x(03)00500-5 · Cited by 206
Li, C. (2002) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.128 · Cited by 189
Mass dampers and their optimal designs for building vibration control
Chang, C. C. (1999) · Engineering Structures · doi:10.1016/s0141-0296(97)00213-7 · Cited by 177
A closed-form optimal tuning criterion for TMD in damped structures
Ghosh, A., & Basu, B. (2007) · Structural Control and Health Monitoring · doi:10.1002/stc.176 · Cited by 170
“Fujino and Abe [7] have employed a perturbation technique to derive formulas for optimal TMD parameters which may be used with good accuracy for mass ratios less than 0.”
MethodInfluentialThe tuned bistable nonlinear energy sink
Habib, G., & Romeo, F. (2017) · Nonlinear Dynamics · doi:10.1007/s11071-017-3444-y · Cited by 169
“Most of these studies have dealt with structural systems subjected to either harmonic or white noise excitations [3–5].”
BackgroundDai, J., Xu, Z.-D., & Gai, P.-P. (2019) · Engineering Structures · doi:10.1016/j.engstruct.2019.109585 · Cited by 163
Demand-based optimal design of oscillator with parallel-layout viscous inerter damper
Pan, C., Zhang, R., Luo, H., Li, C., & Shen, H. (2018) · Structural Control and Health Monitoring · doi:10.1002/stc.2051 · Cited by 163
Nonlinear magnetic vibration absorber for passive control of a multi–storey structure
Lo Feudo, S., Touzé, C., Boisson, J., & Cumunel, G. (2019) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2018.09.007 · Cited by 136
“Early studies were conducted in [1–3], and the main parameter optimisation criteria are based on the minimization either of the transfer function maximum or of the energy [4, 5], as well as on the pole location [6, 7].”
Optimization of non-uniformly distributed multiple tuned mass damper
Li, H., & Ni, X. (2007) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2007.07.014 · Cited by 135
Tigli, O. F. (2012) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2012.02.017 · Cited by 135
“Then, approximate formulations based on perturbation methods [13] and analytical studies [14] were derived.”
BackgroundMethodTuned mass-damper-inerter (TMDI) for suppressing edgewise vibrations of wind turbine blades
Zhang, Z., & Fitzgerald, B. (2020) · Engineering Structures · doi:10.1016/j.engstruct.2020.110928 · Cited by 132
“Fujino and Abe [8] derived optimal formulas for designing a TMD for various types of loading.”
BackgroundLi, C., & Qu, W. (2005) · Engineering Structures · doi:10.1016/j.engstruct.2005.09.003 · Cited by 128
Nonlinear vibration absorber coupled to a nonlinear primary system: A tuning methodology
Viguié, R., & Kerschen, G. (2009) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2009.05.023 · Cited by 127
Xu, K., Bi, K., Ge, Y., Zhao, L., Han, Q., & Du, X. (2020) · Structural Control and Health Monitoring · doi:10.1002/stc.2529 · Cited by 125
“The constraint condition is that the calculated real parts of the complex eigenvalues of the bridge–IBD system should be negative.(38,39) The eigenvalues of the bridge–IBD system are obtained through solving the following characteristic equation:”
MethodOptimal configurations for a linear vibration suppression device in a multi-storey building
Zhang, S. Y., Jiang, J. Z., & Neild, S. (2017) · Structural Control and Health Monitoring · doi:10.1002/stc.1887 · Cited by 123
Seismic response reduction of irregular buildings using passive tuned mass dampers
Lin, C., Ueng, J., & Huang, T.-C. (2000) · Engineering Structures · doi:10.1016/s0141-0296(98)00054-6 · Cited by 119
Analysis of uniformly and linearly distributed mass dampers under harmonic and earthquake excitation
Park, J., & Reed, D. A. (2001) · Engineering Structures · doi:10.1016/s0141-0296(00)00095-x · Cited by 101
Performance of Multi-TMD in the Towers of Suspension Bridges
Casciati, F., & Giuliano, F. (2009) · Journal of Vibration and Control · doi:10.1177/1077546308091455 · Cited by 98
“In the nineties researches by Xu and Igusa (1992), Yamaguchi and Harnpornchai (1993), Fujino and Abe (1993), Abe and Fujino (1994), Kareem and Kline (1995) and Jangid (1995), put in evidence that multi-device configuration, with a more TMDs connected to the main structure (Figure 6), in general…”
BackgroundAssessment of long-term behavior of tuned mass dampers by system identification
Weber, B., & Feltrin, G. (2010) · Engineering Structures · doi:10.1016/j.engstruct.2010.08.011 · Cited by 96
An improved tuned mass damper (SMA-TMD) assisted by a shape memory alloy spring
Mishra, S. K., Gur, S., & Chakraborty, S. (2013) · Smart Materials and Structures · doi:10.1088/0964-1726/22/9/095016 · Cited by 95
VIBRATION CONTROL IDENTIFICATION OF SEISMICALLY EXCITED m.d.o.f. STRUCTURE-PTMD SYSTEMS
Lin, C.-C., Wang, J.-F., & Ueng, J. (2001) · Journal of Sound and Vibration · doi:10.1006/jsvi.2000.3188 · Cited by 92
“Tsai [11] and Fujino and Abe [12] calculated the parameters of PTMD based on perturbation techniques.”
MethodImplementation considerations for active vibration control in the design of floor structures
Hudson, E., & Reynolds, P. (2012) · Engineering Structures · doi:10.1016/j.engstruct.2012.05.034 · Cited by 91
OPTIMUM MULTIPLE TUNED MASS DAMPERS FOR BASE-EXCITED DAMPED MAIN SYSTEM
BAKRE, S. V., & JANGID, R. S. (2004) · International Journal of Structural Stability and Dynamics · doi:10.1142/s0219455404001367 · Cited by 84
Zhang, M., & Xu, F. (2021) · Journal of Wind Engineering and Industrial Aerodynamics · doi:10.1016/j.jweia.2021.104836 · Cited by 84
A bidirectional and homogeneous tuned mass damper: A new device for passive control of vibrations
Almazán, J. L., de la Llera, J. C., Inaudi, J. A., López-García, D., & Izquierdo, L. E. (2006) · Engineering Structures · doi:10.1016/j.engstruct.2006.09.005 · Cited by 84
“Based on these equations (or on any of the equivalent equations proposed in the literature [11] [12] [13]), valid for linear behavior, simple design equations for the BH-TMD can be easily derived.”
Investigation of semi-active control for seismic protection of elevated highway bridges
Erkus, B., Abé, M., & Fujino, Y. (2002) · Engineering Structures · doi:10.1016/s0141-0296(01)00095-5 · Cited by 83
“Such a study was done by Abé et al. [11], and shows that a continuous increase in bearing stiffness causes a continuous increase in pier response but a continuous decrease in bearing response.”
BackgroundInfluentialSelf-citationYu, H., Gillot, F., & Ichchou, M. N. (2013) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2012.12.014 · Cited by 81
Bandivadekar, T. P., & Jangid, R. (2012) · Journal of Vibration and Control · doi:10.1177/1077546312449849 · Cited by 80
“The explicit formulae for the optimum parameters of a TMD and its effectiveness are available under different combinations of system response and excitation (Warburton 1982; Tsai and Lin 1993; Fujino and Abe 1993, Bakre and Jangid 2004).”
BackgroundOptimal design of friction pendulum tuned mass damper with varying friction coefficient
Chung, L. L., Wu, L. Y., Lien, K. H., Chen, H. H., & Huang, H. H. (2012) · Structural Control and Health Monitoring · doi:10.1002/stc.514 · Cited by 79
Inner mass impact damper for attenuating structure vibration
Cheng, J., & Xu, H. (2005) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2005.07.026 · Cited by 78
“The latter approach is used here (Igusa et al., 1985 and Fujino and Abe, 1993).”
MethodTuned Mass Damper optimization for the mitigation of human-induced vibrations of pedestrian bridges
Tubino, F., & Piccardo, G. (2014) · Meccanica · doi:10.1007/s11012-014-0021-z · Cited by 77
Rathi, A. K., & Chakraborty, A. (2016) · Structural Control and Health Monitoring · doi:10.1002/stc.1857 · Cited by 77
“[5] and Fujino and Abé [6] derived closed-form expressions for different excitations and tuning cases of single degree of freedom (SDOF)-TMD system.”
BackgroundMulti-modal vibration control of truss bridges with tuned mass dampers under general loading
Debnath, N., Deb, S., & Dutta, A. (2016) · Journal of Vibration and Control · doi:10.1177/1077546315571172 · Cited by 77
“Fujino and Abé (1993) presented various formulae based on perturbation solutions for designing the STMD system coupled with SDOF primary system.”
Suppression of vortex-excited vibration of tall buildings using tuned liquid dampers
Chang, C. C., & Gu, M. (1999) · Journal of Wind Engineering and Industrial Aerodynamics · doi:10.1016/s0167-6105(99)00074-4 · Cited by 77
“Fujino and AbeH [ 7 ] showed that the stability boundary of a TMD-building system under self-excited forces can be determined by having eigenvalues expressed as”
BackgroundDynamic characteristics of structures with multiple tuned mass dampers
Jangid, R. S. (1995) · Structural Engineering and Mechanics · doi:10.12989/sem.1995.3.5.497 · Cited by 76
A study on friction-tuned mass damper: harmonic solution and statistical linearization
Zeng, G., & Basu, B. (2010) · Journal of Vibration and Control · doi:10.1177/1077546309354967 · Cited by 76
“Corresponding author: Biswajit Basu, School of Engineering, Trinity College Dublin, Dublin, Ireland Email: basub@tcd.ie Randall et al. (1981), Warburton (1982), Fujino and Abe (1993) to mention a few.”
BackgroundAraz, O., Elias, S., & Kablan, F. (2023) · Soil Dynamics and Earthquake Engineering · doi:10.1016/j.soildyn.2023.107765 · Cited by 75
Vibration Control of Railway Bridges under High-Speed Trains Using Multiple Tuned Mass Dampers
Li, J., Su, M., & Fan, L. (2005) · Journal of Bridge Engineering · doi:10.1061/(asce)1084-0702(2005)10:3(312 · Cited by 74
Elias, S., & Djerouni, S. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.108674 · Cited by 68
Optimal parameters of viscoelastic tuned-mass dampers
Batou, A., & Adhikari, S. (2019) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2019.01.010 · Cited by 66
“Works within the second category include empirical formulae for optimum stiffness and damping of a vibration absorber based on the minimization of the acceleration response by Ioi and Ikeda [13] and a perturbation technique by Fujino and Abe [14].”
MethodVortex-induced vibration control of a flexible circular cylinder using a nonlinear energy sink
Zhang, M., Wu, T., & Øiseth, O. A. (2022) · Journal of Wind Engineering and Industrial Aerodynamics · doi:10.1016/j.jweia.2022.105163 · Cited by 64
Suppression of limit cycle oscillations using the nonlinear tuned vibration absorber
Habib, G., & Kerschen, G. (2015) · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rspa.2014.0976 · Cited by 63
“Corresponding author: Giuseppe Habib Space Structures and Systems Laboratory Department of Aerospace and Mechanical Engineering University of Liège”
MethodXu, K., Dai, Q., Bi, K., Fang, G., & Zhao, L. (2022) · Journal of Wind Engineering and Industrial Aerodynamics · doi:10.1016/j.jweia.2022.104970 · Cited by 62
Closed-form formulas for the optimal pole-based design of tuned mass dampers
Bisegna, P., & Caruso, G. (2012) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2012.01.005 · Cited by 60
Two-stage optimum design of tuned mass dampers with consideration of stroke
Wang, J.-F., Lin, C.-C., & Lian, C.-H. (2009) · Structural Control and Health Monitoring · doi:10.1002/stc.312 · Cited by 60
Innovative seismic retrofitting strategy of added stories isolation system
Chey, M., Chase, J. G., Mander, J. B., & Carr, A. J. (2013) · Frontiers of Structural and Civil Engineering · doi:10.1007/s11709-013-0195-9 · Cited by 60
Chung, L.-L., Wu, L.-Y., Yang, C.-S. W., Lien, K.-H., Lin, M.-C., & Huang, H.-H. (2013) · Structural Control and Health Monitoring · doi:10.1002/stc.496 · Cited by 59
“Accordingly, a perturbation technique was employed by Fujino and Abe in 1993 [6] to optimize the TMD parameters for a variety of loadings.”
MethodSimple and double Hopf bifurcations in aeroelastic oscillators with tuned mass dampers
Gattulli, V., Fabio, F. D., & Luongo, A. (2001) · Journal of the Franklin Institute · doi:10.1016/s0016-0032(00)00077-6 · Cited by 59
Dai, J., Xu, Z., Xue-jun, Y., Gai, P.-P., & Luo, Y. K. (2019) · Journal of Bridge Engineering · doi:10.1061/(asce)be.1943-5592.0001450 · Cited by 58
Effect of soil interaction on the performance of tuned mass dampers for seismic applications
Ghosh, A. D., & Basu, B. (2004) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2003.09.060 · Cited by 57
Parameter determination of the tuned mass damper mitigating the vortex-induced vibration in bridges
Dai, J., Xu, Z., & Gai, P.-P. (2020) · Engineering Structures · doi:10.1016/j.engstruct.2020.111084 · Cited by 57
Optimum vertical location and design of multiple tuned mass dampers under seismic excitations
Öztürk, B., Çetin, H., & Aydın, E. (2022) · Structures · doi:10.1016/j.istruc.2022.05.014 · Cited by 56
Unified dynamic absorber design formulas for wind-induced vibration control of tall buildings
Chang, C. C., & Qu, W. L. (1998) · The Structural Design of Tall Buildings · doi:10.1002/(sici)1099-1794(199806)7:2<147::aid-tal107>3.0.co;2-3 · Cited by 55
Soto, M. G., & Adeli, H. (2014) · Journal of Civil Engineering and Management · doi:10.3846/13923730.2014.967287 · Cited by 52
“Fujino and Abe (1993) present four sets of equations for optimum tuning parameters of a 2DOF system for four different cases: free vibration, harmonic, selfexcited, and random excitations based on a modification of the 2DOF dynamic characterization proposed by Igusa and Der Kiureghian (1985) using…”
BackgroundInfluentialOne to one resonant double Hopf bifurcation in aeroelastic oscillators with tuned mass dampers
Gattulli, V., Fabio, F. D., & Luongo, A. (2003) · Journal of Sound and Vibration · doi:10.1016/s0022-460x(02)01135-5 · Cited by 50
Anh, N. D., & Nguyen, N. X. (2013) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2013.09.014 · Cited by 50
New Numerical Results from Simulations of Beams and Space Frame Systems with a Tuned Mass Damper
Tho, N. C., Ta, N. T., & Thom, D. V. (2019) · Materials · doi:10.3390/ma12081329 · Cited by 49
“Fujino and Masato [11] employed a perturbation technique to optimize the parameters of TMDs subjected to different types of external loading.”
MethodMatta, E., De Stefano, A., & Spencer, B. F. (2009) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.929 · Cited by 47
Auto-parametric semi-trivial and post-critical response of a spherical pendulum damper
Náprstek, J., & Fischer, C. (2009) · Computers & Structures · doi:10.1016/j.compstruc.2008.11.015 · Cited by 47
“[12] or multiple dampers application have been described, see [13] and others.”
BackgroundOptimal design theories of tuned mass dampers with nonlinear viscous damping
Chung, L.-L., Wu, L., Huang, H.-H., Chang, C.-H., & Lien, K. (2009) · Earthquake Engineering and Engineering Vibration · doi:10.1007/s11803-009-9115-3 · Cited by 47
“Using the perturbation technique, design formulas of optimum parameters were derived for a linear TMD under various types of loadings ( Fujino and Abe, 1993 ).”
BackgroundMethodWang, X., & Yang, B. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.07.038 · Cited by 47
Closed-form optimum tuning formulas for passive Tuned Mass Dampers under benchmark excitations
Salvi, J., & Rizzi, E. (2016) · Smart Structures and Systems · doi:10.12989/sss.2016.17.2.231 · Cited by 45
Xu, S., Fang, G., Zhang, M., Øiseth, O. A., Zhao, L., & Ge, Y. (2023) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2023.110857 · Cited by 43
Closed‐form design formulas of TMDI for suppressing vortex‐induced vibration of bridge structures
Xu, K., Dai, Q., Bi, K., Fang, G., & Ge, Y. (2022) · Structural Control and Health Monitoring · doi:10.1002/stc.3016 · Cited by 42
Ramezani, M., Bathaei, A., & Ghorbani‐Tanha, A. K. (2018) · Earthquake Engineering and Engineering Vibration · doi:10.1007/s11803-018-0483-4 · Cited by 42
Multi-parametric sensitivity analysis of the band structure for tetrachiral acoustic metamaterials
Lepidi, M., & Bacigalupo, A. (2017) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2017.12.014 · Cited by 41
“It can be remarked how a similar behavior has been recurrently highlighted in the perturbation-based eigensensitivity analysis of different structural systems equipped by small resonant masses, like tuned mass dampers [42, 43] or light substructural elements [44, 45].”
BackgroundIMPROVEMENT OF THE STRUCTURE DAMPING PERFORMANCE BY INTERCONNECTION
AIDA, T., ASO, T., TAKESHITA, K., TAKIUCHI, T., & FUJII, T. (2001) · Journal of Sound and Vibration · doi:10.1006/jsvi.2000.3349 · Cited by 41
Optimal frictional coefficient of structural isolation system
Chung, L.-L., Kao, P.-S., Yang, C., Wu, L., & Chen, H.-M. (2013) · Journal of Vibration and Control · doi:10.1177/1077546313487938 · Cited by 41
“Inaudi and Kelly (1995) proposed a friction-dissipating TMD where the restoring force was provided by linear springs and the 1National Center for Research on Earthquake Engineering, Taiwan 2Department of Civil Engineering, National Taiwan University, Taiwan 3Department of Construction Engineering, National Taiwan Univ…”
BackgroundInfluentialCoupled vibration control with tuned mass damper for long-span bridges
Chen, S. R., & Cai, C. S. (2004) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2003.11.056 · Cited by 40
“In a conventional TMD control design, the TMD frequency is designed or tuned to the modal frequency of the fundamental mode [12] in order to reduce the so-called resonant vibration and this method is thus called resonant-suppression approach here.”
MethodNonlinear Tuned Mass Damper for self-excited oscillations
Gattulli, V., Fabio, F. D., & Luongo, A. (2004) · Wind and Structures · doi:10.12989/was.2004.7.4.251 · Cited by 38
Wang, H., Tao, T., Cheng, H., & He, X. (2014) · Mathematical Problems in Engineering · doi:10.1155/2014/506578 · Cited by 38
Extension of equivalent linearization method to design of TMD for linear damped systems
Anh, N. D., & Nguyen, N. X. (2011) · Structural Control and Health Monitoring · doi:10.1002/stc.446 · Cited by 38
“Fujino Y, Abe M. Design formulas for tuned mass dampers based on a perturbation technique.”
MethodOptimal displacement feedback control law for active tuned mass damper
長島, 一. (2001) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.60 · Cited by 38
Araz, O., & Kahya, V. (2021) · Archive of Applied Mechanics · doi:10.1007/s00419-021-02013-0 · Cited by 37
Li, K., Ge, Y., Guo, Z., & Zhao, L. (2015) · Journal of Wind Engineering and Industrial Aerodynamics · doi:10.1016/j.jweia.2015.06.012 · Cited by 37
“To overcome this shortcoming, MTMD (multiple tuned mass dampers) is introduced to work in a wide range of frequencies (Igusa and Xu, 1990; Yamaguchi and Harnpornchai, 1993; Fujino and Abe, 1993; Kareem and Kline, 1995; Li, 2000) and shows good robustness and effectiveness when applied to flutter control (Kwon and Park…”
BackgroundDesign of three-element dynamic vibration absorber for damped linear structures
Anh, N. D., Nguyen, N. X., & Hoa, L. T. T. (2013) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2013.03.032 · Cited by 37
Ueng, J., Lin, C., & Wang, J. (2008) · The Structural Design of Tall and Special Buildings · doi:10.1002/tal.336 · Cited by 36
Li, C. (2012) · The Structural Design of Tall and Special Buildings · doi:10.1002/tal.624 · Cited by 35
“Apparently, remarkable advances have been made in the optimum design formulas for the TMD under various types of external excitations (Warburton, 1981, 1982; Tsai and Lin, 1993a,b; Fujino and Abe, 1993).”
BackgroundDevelopment of optimal design formula for bi-tuned mass dampers using multi-objective optimization
Ok, S.-Y., Song, J., & Park, K.-S. (2009) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2008.11.023 · Cited by 35
Araz, O., & Farsangi, E. N. (2023) · Structures · doi:10.1016/j.istruc.2023.04.017 · Cited by 35
Hao, L., He, H., Tan, P., Jin, K., & Liu, X. (2023) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2023.108394 · Cited by 34
Global-local approach to the design of dynamic vibration absorber for damped structures
Anh, N. D., Nguyen, N. X., & Quân, N. H. (2014) · Journal of Vibration and Control · doi:10.1177/1077546314561282 · Cited by 34
“Fujino and Abe (1993) used a perturbation technique to derive formulae for the DVA’s optimal parameters which may be used with good accuracy for a mass ratio less than 2 percent and for very low values of the structural damping ratio.”
MethodDesign of non-traditional dynamic vibration absorber for damped linear structures
Anh., N. H., & Nguyen, N. X. (2013) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/0954406213481422 · Cited by 33
“Substituting equation (24) into the first equation of equation (22) and using equation (15), after some calculations, we get”
MethodA New Tuned Mass Damper Design Method based on Transfer Functions
Çetin, H., & Aydın, E. (2019) · KSCE Journal of Civil Engineering · doi:10.1007/s12205-019-0305-x · Cited by 31
Robust control of vortex‐induced vibration in flexible bridges using an active tuned mass damper
Dai, J., Xu, Z., & Dyke, S. J. (2022) · Structural Control and Health Monitoring · doi:10.1002/stc.2980 · Cited by 31
Tuned vibration absorbers with nonlinear viscous damping for damped structures under random load
Shum, K. M. (2015) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2015.02.003 · Cited by 31
The vibration performance experiment of Tuned Liquid damper and Tuned Liquid Column damper
Kim, Y.-M., You, K.-P., Cho, J.-E., & Hong, D. (2006) · Journal of Mechanical Science and Technology · doi:10.1007/bf02915943 · Cited by 31
Control of primary and subharmonic resonances of a Duffing oscillator via non-linear energy sink
Zulli, D., & Luongo, A. (2015) · International Journal of Non-Linear Mechanics · doi:10.1016/j.ijnonlinmec.2015.08.014 · Cited by 31
OPTIMUM PASSIVE TUNED MASS DAMPER SYSTEMS FOR MAIN STRUCTURES UNDER HARMONIC EXCITATION
Araz, O. (2021) · Mühendislik Bilimleri ve Tasarım Dergisi · doi:10.21923/jesd.888880 · Cited by 29
Kiran, K. K., Ahmad, S., Al-Osta, M. A., & Bahraq, A. A. (2023) · Structures · doi:10.1016/j.istruc.2023.105253 · Cited by 29
Passive Control of Bridge Wind-Induced Instabilities by Tuned Mass Dampers and Movable Flaps
Bakis, K. N., Massaro, M., Williams, M. S., & Graham, J. M. R. (2017) · Journal of Engineering Mechanics · doi:10.1061/(asce)em.1943-7889.0001287 · Cited by 28
Metadata
- Authors
- Fujino, Y., & Abé, M.
- Affiliations
- The University of Tokyo (JP)
- Northwestern University (US)
- ORCID
- Fujino, Yozo
- Venue
- Earthquake Engineering & Structural Dynamics
- Publisher
- Wiley
- Published
- 1993-10
- Volume
- 22
- Issue
- 10
- Pages
- 833-854
- ISSN
- 0098-8847 (ISSN-L)
- 1096-9845
- OpenAlex
- W2142556710
- Cited by
- 276
- References
- 9
- Citations by year
- 2026: 11 · 2025: 9 · 2024: 23 · 2023: 15 · 2022: 16 · 2021: 13 · 2020: 8 · 2019: 13 · 2018: 9 · 2017: 11 · 2016: 10 · 2015: 9 · 2014: 10 · 2013: 10 · 2012: 6
- FWCI
- 11.57
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Earthquake Engineering & Structural Dynamics (publishedVersion)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Vibration Control and Rheological Fluids
- Physical Sciences › Engineering › Mechanical Engineering › Vibration and Dynamic Analysis
- Physical Sciences › Engineering › Civil and Structural Engineering › Structural Engineering and Vibration Analysis
- Keywords
- tuned mass damper, perturbation method, two-degree-of-freedom system, modal properties, equivalent damping, random loading, harmonic loading, self-excited forces, stability boundaries, TMD parameter optimization, mass ratio, damping ratio, detuning
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.