The DOI matches its Crossref record; 167 of the 167 references it cites were found in a registry or an index.
Review on heat transfer analysis in thermal energy storage using latent heat storage systems and phase change materials
Open accessAbstract
Thermal energy storage (TES) is a technology that stocks thermal energy by heating or cooling a storage medium so that the stored energy can be used later for heating and cooling applications and for power generation. TES has recently attracted increasing interest to thermal applications such as space and water heating, waste heat utilisation, cooling, and air conditioning. Phase change materials (PCMs) used for the storage of thermal energy as latent heat are special types of advanced materials that substantially contribute to the efficient use and conservation of waste heat and solar energy. This paper provides a comprehensive review on the development of latent heat storage (LHS) systems focused on heat transfer and enhancement techniques employed in PCMs to effectively charge and discharge latent heat energy, and the formulation of the phase change problem. The main categories of PCMs are classified and briefly described, and heat transfer enhancement technologies, namely dispersion of low-density materials, use of porous materials, metal matrices and encapsulation, incorporation of extended surfaces and fins, utilisation of heat pipes, cascaded storage, and direct heat transfer techniques, are also discussed in detail. Additionally, a two-dimensional heat transfer simulation model of an LHS system is developed using the control volume technique to solve the phase change problem. Furthermore, a three-dimensional numerical simulation model of an LHS is built to investigate the quasi-steady state and transient heat transfer in PCMs. Finally, several future research directions are provided.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
RETRACTED: Experimental investigation of energy saving in buildings with PCM cold storage
Stritih, U., & Butala, V. (2010) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2010.07.017 · Cited by 116
RetractedSolar Engineering of Thermal Processes
Duffie, J. A., & Beckman, W. A. (2013) · Wiley eBooks · doi:10.1002/9781118671603 · Cited by 6,387
Review on thermal energy storage with phase change materials and applications
Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.10.005 · Cited by 5,936
Molecular thermodynamics of fluid-phase equilibria
Rowlinson, J. S. (1970) · The Journal of Chemical Thermodynamics · doi:10.1016/0021-9614(70)90078-9 · Cited by 5,424
Zalba, B., Marı́n, J. M., Cabeza, L. F., & Mehling, H. (2003) · Applied Thermal Engineering · doi:10.1016/s1359-4311(02)00192-8 · Cited by 4,738
New equations for heat and mass transfer in turbulent pipe and channel flow
Gnielinski, V. (1976) · Medical Entomology and Zoology · Cited by 4,037
Fluid flow through granular beds
Carman, P. C. (1997) · Chemical Engineering Research and Design · doi:10.1016/s0263-8762(97)80003-2 · Cited by 3,300
A review on phase change energy storage: materials and applications
Farid, M. M., Khudhair, A. M., Razack, S. A. K., & Al-Hallaj, S. (2004) · Energy Conversion and Management · doi:10.1016/j.enconman.2003.09.015 · Cited by 3,097
Phase change materials for thermal energy storage
Pielichowska, K., & Pielichowski, K. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.03.005 · Cited by 2,106
Agyenim, F., Hewitt, N., Eames, P., & Smyth, M. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.10.015 · Cited by 2,072
Cited by
A review of performance of zero energy buildings and energy efficiency solutions
Belussi, L., Barozzi, B., Bellazzi, A., Danza, L., Devitofrancesco, A., Fanciulli, C., Ghellere, M., Guazzi, G., Meroni, I., Salamone, F., et al. (2019) · Journal of Building Engineering · doi:10.1016/j.jobe.2019.100772 · Cited by 468
Advances in thermal energy storage: Fundamentals and applications
Ali, H. M., Rehman, T.-U., Arıcı, M., Said, Z., Duraković, B., Mohammed, H. I., Kumar, R., Rathod, M. K., Buyukdagli, O., & Teggar, M. (2024) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2023.101109 · Cited by 457
A review of melting and freezing processes of PCM/nano-PCM and their application in energy storage
Rostami, S., Afrand, M., Shahsavar, A., Sheikholeslami, M., Kalbasi, R., Aghakhani, S., Shadloo, M. S., & Oztop, H. F. (2020) · Energy · doi:10.1016/j.energy.2020.118698 · Cited by 444
Jayathunga, D. S., Karunathilake, H. P., Narayana, M., & Witharana, S. (2024) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113904 · Cited by 298
Encapsulation methods for phase change materials – A critical review
Huang, Y., Stonehouse, A., & Abeykoon, C. (2023) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2022.123458 · Cited by 286
Metadata
- Authors
- Sarbu, I., & Dorca, A.
- Venue
- International Journal of Energy Research
- Publisher
- Wiley
- Published
- 2018-10-02
- Volume
- 43
- Issue
- 1
- Pages
- 29-64
- ISSN
- 0363-907X (ISSN-L)
- 1099-114X
- OpenAlex
- W2895472840
- Cited by
- 347
- References
- 167
- FWCI
- 16.15
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Review on heat transfer analysis in thermal energy storage using latent heat storage systems and phase change materials. https://app.cochat.ai/papers/10.1002/er.4196
- The paper
- Sarbu, I., & Dorca, A. (2019). Review on heat transfer analysis in thermal energy storage using latent heat storage systems and phase change materials. International Journal of Energy Research. https://doi.org/10.1002/er.4196
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.