The DOI matches its Crossref record; 167 of the 167 references it cites were found in a registry or an index.
Review on heat transfer analysis in thermal energy storage using latent heat storage systems and phase change materials
Open accessAbstract
Thermal energy storage (TES) is a technology that stocks thermal energy by heating or cooling a storage medium so that the stored energy can be used later for heating and cooling applications and for power generation. TES has recently attracted increasing interest to thermal applications such as space and water heating, waste heat utilisation, cooling, and air conditioning. Phase change materials (PCMs) used for the storage of thermal energy as latent heat are special types of advanced materials that substantially contribute to the efficient use and conservation of waste heat and solar energy. This paper provides a comprehensive review on the development of latent heat storage (LHS) systems focused on heat transfer and enhancement techniques employed in PCMs to effectively charge and discharge latent heat energy, and the formulation of the phase change problem. The main categories of PCMs are classified and briefly described, and heat transfer enhancement technologies, namely dispersion of low-density materials, use of porous materials, metal matrices and encapsulation, incorporation of extended surfaces and fins, utilisation of heat pipes, cascaded storage, and direct heat transfer techniques, are also discussed in detail. Additionally, a two-dimensional heat transfer simulation model of an LHS system is developed using the control volume technique to solve the phase change problem. Furthermore, a three-dimensional numerical simulation model of an LHS is built to investigate the quasi-steady state and transient heat transfer in PCMs. Finally, several future research directions are provided.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
RETRACTED: Experimental investigation of energy saving in buildings with PCM cold storage
Stritih, U., & Butala, V. (2010) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2010.07.017 · Cited by 116
RetractedSolar Engineering of Thermal Processes
Duffie, J. A., & Beckman, W. A. (2013) · Wiley eBooks · doi:10.1002/9781118671603 · Cited by 6,387
Review on thermal energy storage with phase change materials and applications
Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.10.005 · Cited by 5,936
Molecular thermodynamics of fluid-phase equilibria
Rowlinson, J. S. (1970) · The Journal of Chemical Thermodynamics · doi:10.1016/0021-9614(70)90078-9 · Cited by 5,424
Zalba, B., Marı́n, J. M., Cabeza, L. F., & Mehling, H. (2003) · Applied Thermal Engineering · doi:10.1016/s1359-4311(02)00192-8 · Cited by 4,738
New equations for heat and mass transfer in turbulent pipe and channel flow
Gnielinski, V. (1976) · Medical Entomology and Zoology · Cited by 4,037
Fluid flow through granular beds
Carman, P. C. (1997) · Chemical Engineering Research and Design · doi:10.1016/s0263-8762(97)80003-2 · Cited by 3,300
A review on phase change energy storage: materials and applications
Farid, M. M., Khudhair, A. M., Razack, S. A. K., & Al-Hallaj, S. (2004) · Energy Conversion and Management · doi:10.1016/j.enconman.2003.09.015 · Cited by 3,097
Phase change materials for thermal energy storage
Pielichowska, K., & Pielichowski, K. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.03.005 · Cited by 2,106
Agyenim, F., Hewitt, N., Eames, P., & Smyth, M. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.10.015 · Cited by 2,072
Review on thermal energy storage with phase change materials (PCMs) in building applications
Zhou, D., Zhao, C. Y., & Tian, Y. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.08.025 · Cited by 1,896
A review of solar collectors and thermal energy storage in solar thermal applications
Tian, Y., & Zhao, C. Y. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.11.051 · Cited by 1,772
Gil, A., Medrano, M., Martorell, I., Lázaro, A., Dolado, P., Zalba, B., & Cabeza, L. F. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.07.035 · Cited by 1,762
Brent, A. D., Voller, V. R., & Reid, K. J. (1988) · Numerical Heat Transfer · doi:10.1080/10407788808913615 · Cited by 1,699
95/03996 Heat pipe science and technology
(1995) · Fuel and Energy Abstracts · doi:10.1016/0140-6701(95)95610-h · Cited by 1,495
Khudhair, A. M., & Farid, M. M. (2004) · Energy Conversion and Management · doi:10.1016/s0196-8904(03)00131-6 · Cited by 1,394
A Comprehensive Review of Thermal Energy Storage
Sarbu, I., & Sebarchievici, C. (2018) · Sustainability · doi:10.3390/su10010191 · Cited by 1,311
Thermal energy storage technologies and systems for concentrating solar power plants
Kuravi, S., Trahan, J., Goswami, D. Y., Rahman, M. M., & Stefanakos, E. K. (2013) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2013.02.001 · Cited by 1,295
High-temperature phase change materials for thermal energy storage
Kenisarin, M. M. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.11.011 · Cited by 1,192
PCM thermal storage in buildings: A state of art
Tyagi, V. V., & Buddhi, D. (2007) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2005.10.002 · Cited by 1,090
Pereira da Cunha, J., & Eames, P. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.05.097 · Cited by 1,080
A review on phase change materials integrated in building walls
Kuznik, F., David, D., Johannes, K., & Roux, J.-J. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.08.019 · Cited by 1,057
Review of solid–liquid phase change materials and their encapsulation technologies
Su, W., Darkwa, J., & Kokogiannakis, G. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.044 · Cited by 1,037
Sarı, A., & Karaipekli, A. (2007) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2006.11.004 · Cited by 978
Heat transfer characteristics of thermal energy storage system using PCM capsules: A review
Regin, A. F., Solanki, S. C., & Saini, J. S. (2008) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.06.009 · Cited by 945
Thermal energy storage: Recent developments and practical aspects
Zhang, H., Baeyens, J., Cáceres, G., Degrève, J., & Lv, Y. (2016) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2015.10.003 · Cited by 910
Jamekhorshid, A., Sadrameli, S. M., & Farid, M. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.12.033 · Cited by 899
Heat and cold storage with PCM: An up to date introduction into basics and applications
Mehling, H., & Cabeza, L. F. (2008) · Heat and Mass Transfer · doi:10.1007/978-3-540-68557-9 · Cited by 894
Liu, M., Saman, W., & Bruno, F. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.01.020 · Cited by 864
Sharma, R. K., Ganesan, P., Tyagi, V. V., Metselaar, H. S. C., & Sandaran, S. C. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.01.084 · Cited by 809
Zhao, C. Y., Lu, W., & Tian, Y. (2010) · Solar Energy · doi:10.1016/j.solener.2010.04.022 · Cited by 757
Latent Heat Storage Materials and Systems: A Review
Sharma, S. D., & Sagara, K. (2005) · International Journal of Green Energy · doi:10.1081/ge-200051299 · Cited by 714
Performance enhancement in latent heat thermal storage system: A review
Jegadheeswaran, S., & Pohekar, S. D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.06.024 · Cited by 702
A review on phase-change materials: Mathematical modeling and simulations
Dutil, Y., Rousse, D. R., Salah, N. B., Lassue, S., & Zalewski, L. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.06.011 · Cited by 676
A review on effect of phase change material encapsulation on the thermal performance of a system
Salunkhe, P. B., & Shembekar, P. S. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.05.037 · Cited by 657
Melting and Solidification of a Pure Metal on a Vertical Wall
Gau, C., & Viskanta, R. (1986) · Journal of Heat Transfer · doi:10.1115/1.3246884 · Cited by 655
A review of potential materials for thermal energy storage in building applications
Tatsidjodoung, P., Le Pierrès, N., & Luo, L. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.10.025 · Cited by 643
Numerical solution of phase-change problems
Bonacina, C., Comini, G., Fasano, A., et al. (1973) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(73)90202-0 · Cited by 611
Maximization of performance of a PCM latent heat storage system with innovative fins
Sciacovelli, A., Gagliardi, F., & Verda, V. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.07.015 · Cited by 603
Ibrahim, N. I., Al-Sulaiman, F. A., Rahman, S., Yilbas, B. S., & Sahin, A. Z. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.169 · Cited by 580
Al-Abidi, A. A., Mat, S., Sopian, K., Sulaiman, M. Y., & Mohammad, A. T. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.01.011 · Cited by 562
Comini, G., Guidice, S. D., Lewis, R. W., et al. (1974) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.1620080314 · Cited by 551
Yu, S., Wang, X., & Wu, D. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.10.029 · Cited by 531
Tian, Y., & Zhao, C. Y. (2011) · Energy · doi:10.1016/j.energy.2011.07.019 · Cited by 495
Esen, M., Durmuş, A., & Durmuş, A. (1998) · Solar Energy · doi:10.1016/s0038-092x(97)00104-7 · Cited by 480
A review of phase change materials for vehicle component thermal buffering
Jankowski, N. R., & McCluskey, F. P. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.08.026 · Cited by 480
Fan, L.-W., Fang, X., Wang, X., Zeng, Y., Xiao, Y.-Q., Yu, Z.-T., Xu, X., Hu, Y.-C., & Cen, K.-F. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.043 · Cited by 478
Analysis of Multidimensional Conduction Phase Change Via the Enthalpy Model
Shamsundar, N., & Sparrow, E. M. (1975) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.3450375 · Cited by 431
Effect of carbon nanofiber additives on thermal behavior of phase change materials
Elgafy, A., & Lafdi, K. (2005) · Carbon · doi:10.1016/j.carbon.2005.06.042 · Cited by 430
A nano-graphite/paraffin phase change material with high thermal conductivity
Li, M. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.01.031 · Cited by 421
Numerical investigation of a PCM-based heat sink with internal fins
Shatikian, V., Ziskind, G., & Letan, R. (2005) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2004.10.042 · Cited by 420
Mesalhy, O., Lafdi, K., Elgafy, A., & Bowman, K. (2005) · Energy Conversion and Management · doi:10.1016/j.enconman.2004.06.010 · Cited by 407
Thermal conductivity enhancement of energy storage media using carbon fibers
Fukai, J., Kanou, M., Kodama, Y., & Miyatake, O. (2000) · Energy Conversion and Management · doi:10.1016/s0196-8904(99)00166-1 · Cited by 395
FAST IMPLICIT FINITE-DIFFERENCE METHOD FOR THE ANALYSIS OF PHASE CHANGE PROBLEMS
Voller, V. R. (1990) · Numerical Heat Transfer, Part B: Fundamentals · doi:10.1080/10407799008961737 · Cited by 380
Thermal conductivity enhancement in a latent heat storage system
Mettawee, E.-B. S., & Assassa, G. M. R. (2007) · Solar Energy · doi:10.1016/j.solener.2006.11.009 · Cited by 378
Cascaded latent heat storage for parabolic trough solar power plants
Michels, H., & Pitz-Paal, R. (2007) · Solar Energy · doi:10.1016/j.solener.2006.09.008 · Cited by 373
Ge, H., Li, H., Mei, S., & Liu, J. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.01.008 · Cited by 368
Zhou, D., & Zhao, C. Y. (2011) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2010.11.022 · Cited by 366
Garg, H. P., Mullick, S. C., & Bhargava, A. K. (1985) · Springer eBooks · doi:10.1007/978-94-009-5301-7 · Cited by 364
Agyenim, F., Eames, P., & Smyth, M. (2010) · Renewable Energy · doi:10.1016/j.renene.2009.03.010 · Cited by 361
Review of cold storage materials for air conditioning application
Li, G., Hwang, Y., & Radermacher, R. (2012) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2012.06.003 · Cited by 349
Fang, G., Chen, Z., & Li, H. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.07.054 · Cited by 333
Thermal energy storage: “How previous findings determine current research priorities”
Fernandes, D., Pitié, F., Cáceres, G., & Baeyens, J. (2012) · Energy · doi:10.1016/j.energy.2012.01.024 · Cited by 328
Sarı, A., Alkan, C., & Karaipekli, A. (2010) · Applied Energy · doi:10.1016/j.apenergy.2009.10.011 · Cited by 324
Wang, W., Yang, X., Fang, Y., Ding, J., & Yan, J. (2009) · Applied Energy · doi:10.1016/j.apenergy.2008.12.004 · Cited by 309
Mahdi, J. M., Lohrasbi, S., Ganji, D. D., & Nsofor, E. C. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.03.095 · Cited by 300
Jacob, R., & Bruno, F. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.03.038 · Cited by 296
Passive thermal control in residential buildings using phase change materials
Kenisarin, M., & Mahkamov, K. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.128 · Cited by 296
Thermal cycling test of few selected inorganic and organic phase change materials
Shukla, A., Buddhi, D., & Sawhney, R. L. (2008) · Renewable Energy · doi:10.1016/j.renene.2008.02.026 · Cited by 295
Shabgard, H., Allen, M. J., Sharifi, N., Benn, S. P., Faghri, A., & Bergman, T. L. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.05.020 · Cited by 293
Lafdi, K., Mesalhy, O., & Shaikh, S. (2007) · Journal of Applied Physics · doi:10.1063/1.2802183 · Cited by 291
Wang, W., Yang, X., Fang, Y., Ding, J., & Yan, J. (2009) · Applied Energy · doi:10.1016/j.apenergy.2008.10.020 · Cited by 287
Prototype thermochemical heat storage with open reactor system
Zondag, H., Kikkert, B., Smeding, S., Boer, R. D., & Bakker, M. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.01.082 · Cited by 280
Numerical simulation of a shell-and-tube latent heat thermal energy storage unit
Lacroix, M. (1993) · Solar Energy · doi:10.1016/0038-092x(93)90029-n · Cited by 274
Adine, H. A., & El Qarnia, H. (2009) · Applied Mathematical Modelling · doi:10.1016/j.apm.2008.05.016 · Cited by 260
Phase change materials and carbon nanostructures for thermal energy storage: A literature review
Amaral, C., Vicente, R., Marques, P. A. A. P., & Barros-Timmons, A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.093 · Cited by 248
Stability of sugar alcohols as PCM for thermal energy storage
Solé, A., Neumann, H., Niedermaier, S., Martorell, I., Schossig, P., & Cabeza, L. F. (2014) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2014.03.020 · Cited by 245
Velraj, R., Seeniraj, R. V., Hafner, B., Faber, C., & Schwarzer, K. (1997) · Solar Energy · doi:10.1016/s0038-092x(96)00167-3 · Cited by 242
Thermal conductivity measurement of a PCM based storage system containing carbon fibers
Frusteri, F., Leonardi, V., Vasta, S., & Restuccia, G. (2005) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2004.10.007 · Cited by 242
High temperature latent heat thermal energy storage using heat pipes
Shabgard, H., Bergman, T. L., Sharifi, N., & Faghri, A. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2010.03.035 · Cited by 242
Sharma, A., Sharma, S. D., & Buddhi, D. (2002) · Energy Conversion and Management · doi:10.1016/s0196-8904(01)00131-5 · Cited by 231
Konuklu, Y., Unal, M., & Paksoy, H. O. (2014) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2013.09.035 · Cited by 227
Morrison, D. J., & Abdel-Khalik, S. I. (1978) · Solar Energy · doi:10.1016/0038-092x(78)90141-x · Cited by 220
Preparation, characterization and thermal properties of micro-encapsulated phase change materials
Pan, L., Tao, Q., Zhang, S., Wang, S., Zhang, J., Wang, S., Wang, Z., & Zhang, Z. (2012) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.09.020 · Cited by 218
Comparison of finite element techniques for solidification problems
Dalhuijsen, A. J., & Śegal, A. (1986) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.1620231003 · Cited by 213
Peiró, G., Gasia, J., Miró, L., & Cabeza, L. F. (2015) · Renewable Energy · doi:10.1016/j.renene.2015.05.029 · Cited by 211
Effects of different multiple PCMs on the performance of a latent thermal energy storage system
Fang, M., & Chen, G. (2007) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2006.08.001 · Cited by 210
Zhang, Y., & Faghri, A. (1996) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(95)00402-5 · Cited by 209
Zhao, D., & Tan, G. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.10.051 · Cited by 193
Numerical simulation of a latent heat thermal energy storage system with enhanced heat conduction
Costa, M., Buddhi, D., & Oliva, A. (1998) · Energy Conversion and Management · doi:10.1016/s0196-8904(96)00193-8 · Cited by 191
Li, M., Wu, Z., & Tan, J. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.11.018 · Cited by 191
Numerical study of PCM solidification in a finned tube thermal storage including natural convection
Jmal, I., & Baccar, M. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.03.065 · Cited by 188
Sheikholeslami, M., Lohrasbi, S., & Ganji, D. D. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.06.158 · Cited by 185
Yao, L. S., & Prusa, J. (1989) · Advances in Heat Transfer · doi:10.1016/s0065-2717(08)70211-9 · Cited by 174
Experimental and numerical investigation of thermal energy storage with a finned tube
Erek, A., ?lken, Z., & Acar, M. A. (2005) · International Journal of Energy Research · doi:10.1002/er.1057 · Cited by 174
Agyenim, F., Eames, P., & Smyth, M. (2011) · Renewable Energy · doi:10.1016/j.renene.2010.06.005 · Cited by 169
Heat storage in eutectic alloys
Birchenall, C. E., & Riechman, A. F. (1980) · Metallurgical Transactions A · doi:10.1007/bf02653497 · Cited by 168
Thermal conductivity improvement of phase change materials/graphite foam composites
Moeini Sedeh, M., & Khodadadi, J. M. (2013) · Carbon · doi:10.1016/j.carbon.2013.04.004 · Cited by 167
Sanusi, O., Warzoha, R., & Fleischer, A. S. (2011) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2011.04.046 · Cited by 167
A numerical solution of the multidimensional solidification (or melting) problem
Lazaridis, A. (1970) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(70)90180-8 · Cited by 165
Hassan, A., Shakeel Laghari, M., & Rashid, Y. (2016) · Sustainability · doi:10.3390/su8101046 · Cited by 165
Microencapsulation of a fatty acid with Poly(melamine–urea–formaldehyde)
Konuklu, Y., Paksoy, H. O., Unal, M., & Konuklu, S. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.01.042 · Cited by 160
A comprehensive numerical model for melting with natural convection
Wang, S., Faghri, A., & Bergman, T. L. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2009.12.057 · Cited by 158
Coen‐Porisini, F. (1988) · Solar Energy · doi:10.1016/0038-092x(88)90136-3 · Cited by 155
Heat-transfer characteristics of a latent heat storage system using MgCl2 · 6H2O
Choi, J. C., & Kim, S. D. (1992) · Energy · doi:10.1016/0360-5442(92)90004-j · Cited by 150
Liu, Z., Sun, X., & Ma, C. (2004) · Energy Conversion and Management · doi:10.1016/j.enconman.2004.05.012 · Cited by 149
Cao, L., Tang, F., & Fang, G. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2013.12.028 · Cited by 148
Accelerated thermal cycle test of latent heat-storage materials
Sharma, S. D., Buddhi, D., & Sawhney, R. L. (1999) · Solar Energy · doi:10.1016/s0038-092x(99)00045-6 · Cited by 147
Analysis of geometrical and operational parameters of PCM in a fin and tube heat exchanger
Rahimi, M., Ranjbar, A. A., Ganji, D. D., Sedighi, K., Hosseini, M. J., & Bahrampoury, R. (2014) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2014.02.025 · Cited by 147
Analysis and optimization of a latent thermal energy storage system with embedded heat pipes
Nithyanandam, K., & Pitchumani, R. (2011) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2011.06.018 · Cited by 146
Research Progress of Phase Change Materials (PCMs) Embedded with Metal Foam (a Review)
Chen, J., Yang, D., Jiang, J., Ma, A., & Song, D. (2014) · Procedia Materials Science · doi:10.1016/j.mspro.2014.07.579 · Cited by 145
(1997) · Fuel and Energy Abstracts · doi:10.1016/s0140-6701(97)84240-3 · Cited by 145
Shabgard, H., Robak, C. W., Bergman, T. L., & Faghri, A. (2012) · Solar Energy · doi:10.1016/j.solener.2011.12.008 · Cited by 144
(1998) · Fuel and Energy Abstracts · doi:10.1016/s0140-6701(98)97712-8 · Cited by 143
Experimental and theoretical analysis of an aluminum foam enhanced phase change thermal storage unit
Fleming, E., Wen, S., Shi, L., & da Silva, A. K. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.11.022 · Cited by 140
Sun, J., Zhang, R. Y., Liu, Z. P., & Lu, G. H. (2006) · Energy Conversion and Management · doi:10.1016/j.enconman.2006.05.017 · Cited by 139
Theoretic Prediction of Melting Temperature and Latent Heat for a Fatty Acid Eutectic Mixture
Yanping, Y., Wenquan, T., Xiaoling, C., et al. (2011) · Journal of Chemical & Engineering Data · doi:10.1021/je200057j · Cited by 138
Ghoneim, A. A. (1989) · Solar Energy · doi:10.1016/0038-092x(89)90013-3 · Cited by 136
Thermal analysis of phase change materials in the temperature range 120–150°C
Haillot, D., Bauer, T., Kröner, U., & Tamme, R. (2010) · Thermochimica Acta · doi:10.1016/j.tca.2010.11.011 · Cited by 136
Li, M., Chen, M., & Wu, Z. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.04.029 · Cited by 135
Thermal and heat transfer characteristics in a latent heat storage system using lauric acid
Sarı, A., & Kaygusuz, K. (2002) · Energy Conversion and Management · doi:10.1016/s0196-8904(01)00187-x · Cited by 135
Tiari, S., & Qiu, S. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.08.004 · Cited by 130
Perello-Marin, M. R., Giner, G. R., & Díaz, O. P. (2018) · Sustainability · doi:10.3390/su10010158 · Cited by 129
Isotherm Migration Method in two dimensions
Crank, J., & Gupta, R. S. (1975) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(75)90228-8 · Cited by 122
Heat pipe-assisted melting of a phase change material
Sharifi, N., Wang, S., Bergman, T. L., & Faghri, A. (2012) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2012.03.023 · Cited by 121
Elmozughi, A. F., Solomon, L. D., Öztekin, A., & Neti, S. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.07.087 · Cited by 118
Fan, L., Xiao, Y., Zeng, Y. D., Fang, X., Wang, X., Xu, X., Yu, Z., Hong, R.-H., Hu, Y.-C., & Cen, K. (2013) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2013.03.015 · Cited by 113
Thermal energy storage in salt hydrates
Telkes, M. (1980) · Solar Energy Materials · doi:10.1016/0165-1633(80)90033-7 · Cited by 113
Hamada, Y., Ohtsu, W., & Fukai, J. (2003) · Solar Energy · doi:10.1016/j.solener.2003.07.028 · Cited by 113
Heat pumps and energy storage – The challenges of implementation
Hewitt, N. (2011) · Applied Energy · doi:10.1016/j.apenergy.2010.12.028 · Cited by 112
Gong, Z., & MUJUMDAR, A. S. (1997) · Applied Thermal Engineering · doi:10.1016/s1359-4311(96)00054-3 · Cited by 111
Energy and exergy evaluation of a multiple-PCM thermal storage unit for free cooling applications
Mosaffa, A. H., Farshi, L. G., Ferreira, C. A. I., & Rosen, M. A. (2014) · Renewable Energy · doi:10.1016/j.renene.2014.02.025 · Cited by 105
An implicit algorithm for melting and settling of phase change material inside macrocapsules
Faden, M., König-Haagen, A., Höhlein, S., & Brüggemann, D. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.10.033 · Cited by 99
Numerical Investigation of PCM Based Heat Sinks with Embedded Metal Foam/Crossed Plate Fins
Srivatsa, P. V. S. S., Baby, R., & Balaji, C. (2014) · Numerical Heat Transfer Part A Applications · doi:10.1080/10407782.2014.894371 · Cited by 96
Li, Z., & Wu, Z. (2013) · Solar Energy · doi:10.1016/j.solener.2013.11.017 · Cited by 96
Short-term storage systems of thermal energy for buildings: a review
Basecq, V., Michaux, G., Inard, C., & Blondeau, P. (2013) · Advances in Building Energy Research · doi:10.1080/17512549.2013.809271 · Cited by 90
Kotzé, J. P., von Backström, T. W., & Erens, P. J. (2013) · Journal of Solar Energy Engineering · doi:10.1115/1.4023485 · Cited by 86
Enhanced heat transfer for PCM melting in the frustum-shaped unit with multiple PCMs
Hu, Z., Li, A., Gao, R., & Yin, H. (2015) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-014-4370-6 · Cited by 81
Lopez, J., Cáceres, G., del Barrio, E. P., & Jomaa, W. (2009) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2009.10.025 · Cited by 76
Nakaso, K., Teshima, H., Yoshimura, A., Nogami, S., Hamada, Y., & Fukai, J. (2007) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2007.02.001 · Cited by 74
Lohrasbi, S., Sheikholeslami, M., & Ganji, D. D. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.03.005 · Cited by 74
Design of a latent thermal energy storage system with embedded heat pipes
Nithyanandam, K., & Pitchumani, R. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.03.025 · Cited by 71
Zhang, Y., & Faghri, A. (1996) · Enhanced heat transfer/Journal of enhanced heat transfer · doi:10.1615/jenhheattransf.v3.i2.50 · Cited by 71
Theoretical and experimental investigation of plate screen mesh heat pipe solar collector
Brahim, T., Dhaou, M. H., & Jemni, A. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.07.041 · Cited by 71
Review on Heat Transfer Mechanisms and Characteristics in Encapsulated PCMs
Liu, S., Li, Y., & Zhang, Y. (2014) · Heat Transfer Engineering · doi:10.1080/01457632.2015.965093 · Cited by 69
Yoo, J., & Rubinsky, B. (1983) · Numerical Heat Transfer · doi:10.1080/01495728308963083 · Cited by 66
Reyes, A. E., Henríquez-Vargas, L., Aravena, R., & Sepúlveda, F. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.07.068 · Cited by 64
Jung, E. G., & Boo, J. H. (2013) · Solar Energy · doi:10.1016/j.solener.2013.11.008 · Cited by 61
The problem of time-dependent natural convection melting with conduction in the solid
Zhang, Z., & Bejan, A. (1989) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(89)90204-4 · Cited by 55
Shabgard, H., Faghri, A., Bergman, T. L., & Andraka, C. E. (2013) · Journal of Solar Energy Engineering · doi:10.1115/1.4025973 · Cited by 53
Proportioning composites for efficient thermal storage walls
Knowles, T. R. (1983) · Solar Energy · doi:10.1016/0038-092x(83)90020-8 · Cited by 50
Kimura, H., & Kai, J. (1988) · Energy Conversion and Management · doi:10.1016/0196-8904(88)90021-0 · Cited by 45
Performance of suspended finned heat pipes in high-temperature latent heat thermal energy storage
Khalifa, A., Tan, L., Date, A., & Akbarzadeh, A. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.02.030 · Cited by 43
A solar water heater based on phase-changing material
Bhargava, A. K. (1983) · Applied Energy · doi:10.1016/0306-2619(83)90063-6 · Cited by 42
Anisotropic heat transfer in composites based on high-thermal conductive carbon fibers
Hamada, Y., Otsu, W., Fukai, J., Morozumi, Y., & Miyatake, O. (2004) · Energy · doi:10.1016/j.energy.2004.04.024 · Cited by 38
Solar thermal storage systems using phase change materials
Buddhi, D., Bansal, N. K., Sawhney, R. L., et al. (1988) · International Journal of Energy Research · doi:10.1002/er.4440120318 · Cited by 37
Solidification and melting of materials subject to convection and radiation
Chung, B. T. F., & Yeh, L. T. (1975) · Journal of Spacecraft and Rockets · doi:10.2514/3.27839 · Cited by 36
Energy storage via desiccants for food/agricultural applications
Miller, W. M. (1983) · Energy in Agriculture · doi:10.1016/0167-5826(83)90029-3 · Cited by 34
A fuzzy programming approach to energy resource allocation
Chedid, R. B., Mezher, T. M., & Jarrouche, C. (1999) · International Journal of Energy Research · doi:10.1002/(sici)1099-114x(19990325)23:4<287::aid-er476>3.0.co;2-k · Cited by 29
Durability of latent heat storage tube-sheets
Ting, K. C., Giannakakos, P. N., & GILBERT, S. G. (1987) · Solar Energy · doi:10.1016/s0038-092x(87)80035-x · Cited by 28
Comparisons of paraffin wax storage subsystem models using liquid heat transfer media
Marshall, R., & Dietsche, C. (1982) · Solar Energy · doi:10.1016/0038-092x(82)90058-5 · Cited by 24
A preliminary model for phase change thermal energy storage in a shell and tube heat exchanger
Saxena, S., Subrahmaniyam, S., & Sarkar, M. K. (1982) · Solar Energy · doi:10.1016/0038-092x(82)90211-0 · Cited by 22
Modeling and assessment of a thermochemical energy storage using salt hydrates
Al-Abbasi, O., Abdelkefi, A., & Ghommem, M. (2017) · International Journal of Energy Research · doi:10.1002/er.3776 · Cited by 22
Solomon, L. D., Zheng, Y., Tuzla, K., Neti, S., & Öztekin, A. (2018) · International Journal of Energy Research · doi:10.1002/er.4035 · Cited by 21
Simulation and Feasibility Analysis of PCM Based Passive Cooling Technique in Residential House
Jiao, F., & Xu, P. (2015) · Procedia Engineering · doi:10.1016/j.proeng.2015.09.189 · Cited by 17
Chinnapandian, M., Vellaichamy, P., & Velraj, R. (2012) · International Journal of Exergy · doi:10.1504/ijex.2012.050229 · Cited by 8
Cited by
A review of performance of zero energy buildings and energy efficiency solutions
Belussi, L., Barozzi, B., Bellazzi, A., Danza, L., Devitofrancesco, A., Fanciulli, C., Ghellere, M., Guazzi, G., Meroni, I., Salamone, F., et al. (2019) · Journal of Building Engineering · doi:10.1016/j.jobe.2019.100772 · Cited by 468
Advances in thermal energy storage: Fundamentals and applications
Ali, H. M., Rehman, T.-U., Arıcı, M., Said, Z., Duraković, B., Mohammed, H. I., Kumar, R., Rathod, M. K., Buyukdagli, O., & Teggar, M. (2024) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2023.101109 · Cited by 457
A review of melting and freezing processes of PCM/nano-PCM and their application in energy storage
Rostami, S., Afrand, M., Shahsavar, A., Sheikholeslami, M., Kalbasi, R., Aghakhani, S., Shadloo, M. S., & Oztop, H. F. (2020) · Energy · doi:10.1016/j.energy.2020.118698 · Cited by 444
Jayathunga, D. S., Karunathilake, H. P., Narayana, M., & Witharana, S. (2024) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113904 · Cited by 298
Encapsulation methods for phase change materials – A critical review
Huang, Y., Stonehouse, A., & Abeykoon, C. (2023) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2022.123458 · Cited by 286
Metadata
- Authors
- Sarbu, I., & Dorca, A.
- Venue
- International Journal of Energy Research
- Publisher
- Wiley
- Published
- 2018-10-02
- Volume
- 43
- Issue
- 1
- Pages
- 29-64
- ISSN
- 0363-907X (ISSN-L)
- 1099-114X
- OpenAlex
- W2895472840
- Cited by
- 347
- References
- 167
- FWCI
- 16.15
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.