The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
A perspective on the use of ammonia as a clean fuel: Challenges and solutions
Open accessAbstract
It has been crystal clear to everyone that energy is the most significant requirement for people and their existence. Energy consumption has always been ever increasing in the world due to rising energy demands. Everyday, new energy intensive technologies, vehicles, systems, and applications are entering into our daily routines, which drastically increase the fuel and power requirements for economic activities and societal developments. Such needs have impacted the energy equation with various constraints related to the environment, health, and sustainable development. It is now badly necessary to set up the energy equation without hydrocarbon fuels, and it is therefore fully recognized by many researchers, scientists, organizations, companies, etc. that it is time to move to renewables and clean fuels (particularly with hydrogen and ammonia) which have been advocated by Dincer1 for many years. In a recent perspective article,1 he has declared that COVID-19 coronavirus: closing carbon age, but opening hydrogen age, and he considered the year of 2020 a turning point. This age is even more necessary for human health and human welfare. In conjunction with this, there is a strong need to develop the technologies and economies to make a smooth transition as quickly as possible. That is why this perspective article takes ammonia into consideration for a fair evaluation and suggestions for better combustion practices. It is a well-known fact that almost one-third of the total consumed energy in the world is used in the transportation sector where fossil fuels are primarily used to produce common transportation fuels, covering diesel, gasoline, jet fuel, etc. Their extensive use has been causing very high levels of greenhouse gases, ranging from 20% to 30% depending on the nation's development. Although there is a big attempt to transient to electrical and hybrid vehicles by manufacturer and governments, it seems that is not possible to complete this transition in a short time due to infrastructure, economical, and raw material issues. However, the current environmental indicators indicate the requirement for quick and effective actions. Moreover, the diesel- and gasoline-powered generators used in residential, commercial, utility sectors, and off-grid applications contribute to fossil-based fuel consumption and increase the CO2 emissions. The use of ammonia in combustion processes, such as internal combustion engines and gas turbines, can be a key solution in a faster transition to the hydrogen economy. Recently, there have been numerous attempts to use ammonia in internal combustion engines and gas turbines. The California Public Utilities Commission has met with industry stakeholders on alternatives to diesel generators as part of an ongoing microgrid proceeding and is considering replacing the diesel generators with ammonia-driven ones for 2021. It is planning to change 350 MW of diesel generators used in 63 substations, to ammonia-fueled ones.2 Japan has launched a serious action plan for ammonia use to produce, especially in electricity production. It is expected that 1% of electricity consumption will be met by ammonia-driven systems in Japan.3 For this purpose, ammonia-fueled gas turbine program has been started for power generation in Japan.4 A Japanese marine company has announced starting a project on ammonia-fueled ships and fuel supply systems for it.5 Much more ammonia applications are introduced in the following sections in detail. Despite unique advantages of ammonia, there are some challenges related to its toxicity, flammability and combustion in traditional engines, turbines and power generators. In this perspective article, clean ammonia is considered as a potential, carbon-free solution to processes and systems in various sectors and discussed from various viewpoints, such as potential sources, key methods for production, storage modes and distribution options, applications, advantages, disadvantages, combustions challenges and solutions, and future prospects. It is also evaluated as a clean fuel and proposed for combustion applications. Furthermore, some key solutions to potential challenges in the use of ammonia are discussed and addressed for practical applications. Ammonia (NH3) is known as a colorless and pungent-smelling gas at room temperature with a compound of nitrogen and hydrogen. Pure ammonia is hygroscopic and easily dissolved in water and humidity. Ammonia is, however, corrosive due to its alkaline properties. Having said that it is one of the most commonly produced industrial chemicals around the world. More than 75% of the ammonia produced is used in the agriculture sector as a fertilizer. Ammonia can also be used as a working fluid in a refrigeration cycle. The other common use of ammonia is in household cleaning solutions. Figure 1 illustrates the amount of ammonia produced around the world. The data in Figure 1 between 1945 and 2017 (given as blue line) have been acquired fro
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review and evaluation of hydrogen production methods for better sustainability
Dincer, I., & Acar, C. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.12.035 · Cited by 2,641
Self-citationUsing ammonia as a sustainable fuel
Zamfirescu, C., & Dincer, I. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.02.097 · Cited by 875
Self-citationHistorical statistics for mineral and material commodities in the United States
Kelly, T., Matos, G. R., Buckingham, D. A., DiFrancesco, C. A., Porter, K. E., Berry, C., Crane, M., Goonan, T., & Sznopek, J. (2005) · Data Series · doi:10.3133/ds140 · Cited by 388
Chong, C. T., & Hochgreb, S. (2010) · Proceedings of the Combustion Institute · doi:10.1016/j.proci.2010.05.106 · Cited by 196
Covid‐19 coronavirus: Closing carbon age, but opening hydrogen age
Dinçer, İ. (2020) · International Journal of Energy Research · doi:10.1002/er.5569 · Cited by 109
Yapicioglu, A., & Dinçer, İ. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.02.072 · Cited by 71
Cited by
Limitations of Ammonia as a Hydrogen Energy Carrier for the Transportation Sector
Chatterjee, S., Parsapur, R. K., & Huang, K.-W. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.1c02189 · Cited by 406
A review on ammonia-hydrogen fueled internal combustion engines
Qi, Y., Liu, W., Liu, S., Wang, W., Peng, Y., & Wang, Z. (2023) · eTransportation · doi:10.1016/j.etran.2023.100288 · Cited by 310
Investigation on the decarbonization of shipping: An approach to hydrogen and ammonia
Inal, O. B., Zincir, B., & Deniz, C. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.01.189 · Cited by 175
Ammonia combustion and emissions in practical applications: A review
Alnajideen, M., Shi, H., Northrop, W., Emberson, D., Kane, S., Czyzewski, P., Alnaeli, M., Mashruk, S., Rouwenhorst, K., Yu, C., et al. (2024) · Carbon Neutrality · doi:10.1007/s43979-024-00088-6 · Cited by 146
Efficiency and optimal load capacity of E-Fuel-Based energy storage systems
Tsiklios, C., Schneider, S., Hermesmann, M., & Müller, T. E. (2023) · Advances in Applied Energy · doi:10.1016/j.adapen.2023.100140 · Cited by 48
Metadata
- Authors
- Erdemir, D., & Dincer, I.
- Venue
- International Journal of Energy Research
- Publisher
- Wiley
- Published
- 2020-11-25
- Volume
- 45
- Issue
- 4
- Pages
- 4827-4834
- ISSN
- 0363-907X (ISSN-L)
- 1099-114X
- OpenAlex
- W3109201375
- Cited by
- 265
- References
- 6
- FWCI
- 10.18
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A perspective on the use of ammonia as a clean fuel: Challenges and solutions. https://app.cochat.ai/papers/10.1002/er.6232
- The paper
- Erdemir, D., & Dincer, I. (2021). A perspective on the use of ammonia as a clean fuel: Challenges and solutions. International Journal of Energy Research. https://doi.org/10.1002/er.6232
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.