The DOI matches its Crossref record.
Acrylonitrile–butadiene–styrene copolymers (ABS): Pyrolysis and combustion products and their toxicity—a review of the literature
Open accessAbstract
A review of literature was undertaken to ascertain the current knowledge of the nature of the thermal decomposition products generated from ABS and the toxicity of these evolved products in toto. The literature review encompasses English language publications available through June 1984. This literature surveyed showed that the principal ABS thermooxidative degradation products of toxicologic importance are carbon monoxide and hydrogen cyanide. The experimental generation of these and other volatile products is principally dependent upon the combustion conditions and the formulation of the plastic. The toxicity of ABS thermal degradation products has been evaluated by fire methods. The LC 50 (30 min exposure + 14 day post‐exposure period) values for flaming combustion ranged from 15.0 mgl−1 to 28.5 mgl−1. In the non‐flaming mode of combustion, the LC 50 values ranged from 19.3 Mgl−1 to 64.0 mgl−1. Therefore, no apparent toxicological difference exists between the flaming mode and the non‐flaming mode. The toxicity of ABS degradation products was found to be comparable with the toxicity of the thermal decomposition products of other common polymeric materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Mechanical and chemical recycling of solid plastic waste
Ragaert, K., Delva, L., & Van Geem, K. (2017) · Waste Management · doi:10.1016/j.wasman.2017.07.044 · Cited by 3,276
González-Henríquez, C. M., Sarabia-Vallejos, M. A., & Rodriguez-Hernandez, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.03.001 · Cited by 562
Ultrafine particle emissions from desktop 3D printers
Stephens, B., Azimi, P., El Orch, Z., & Ramos, T. (2013) · Atmospheric Environment · doi:10.1016/j.atmosenv.2013.06.050 · Cited by 488
Is 3D printing safe? Analysis of the thermal treatment of thermoplastics: ABS, PLA, PET, and nylon
Wojtyła, S., Klama, P., & Baran, T. (2017) · Journal of Occupational and Environmental Hygiene · doi:10.1080/15459624.2017.1285489 · Cited by 288
Metadata
- Authors
- Rutkowski, J. V., & Levin, B. C.
- Venue
- Fire and Materials
- Publisher
- Wiley
- Published
- 1986-09
- Volume
- 10
- Issue
- 3-4
- Pages
- 93-105
- ISSN
- 0308-0501 (ISSN-L)
- 1099-1018
- OpenAlex
- W2016182736
- Cited by
- 159
- References
- 0
- FWCI
- 4.58
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Acrylonitrile–butadiene–styrene copolymers (ABS): Pyrolysis and combustion products and their toxicity—a review of the literature. https://app.cochat.ai/papers/10.1002/fam.810100303
- The paper
- Rutkowski, J. V., & Levin, B. C. (1986). Acrylonitrile–butadiene–styrene copolymers (ABS): Pyrolysis and combustion products and their toxicity—a review of the literature. Fire and Materials. https://doi.org/10.1002/fam.810100303
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.