Blended and cross-linked ionomer membranes for application in membrane fuel cells
The DOI matches its Crossref record; 61 of the 61 references it cites were found in a registry or an index.
Abstract
Differently cross‐linked blend membranes were prepared from commercial arylene main‐chain polymers of the poly(etherketone) and poly(ethersulfone) classes, modified with sulfonate groups, sulfinate cross‐linking groups, and basic N‐groups. The following membrane types have been prepared: (i) Van‐der Waals/dipole‐dipole blends by mixing a polysulfonate with unmodified PSU. This membrane type showed a heterogeneous morphology, leading to extreme swelling and even dissolution of the sulfonated component at elevated temperatures. (ii) Hydrogen bridge blends by mixing a polysulfonate with a polyamide or a polyetherimide. This membrane type showed a partially heterogeneous morphology, also leading to extreme swelling/dissolution of the sulfonated blend component at elevated temperatures. (iii) Acid‐base blends by mixing a polysulfonate with a polymeric N‐base (in‐house developed/commercial). A wide range of properties could be achieved with this membrane type by variation of the different parameters. Membranes showing excellent stability and good fuel cell performance up to 100 °C (PEFC) and 130 °C (DMFC) were obtained. (iv) Covalently cross‐linked (blend) membranes by either mixing a polysulfonate with a polysulfinate or by preparing a polysulfinatesulfonate, followed by reaction of the sulfinate groups in solution with a dihalogeno compound under S‐alkylation. The membranes prepared showed effective suppression of swelling without a loss in the H+‐conductivity. The membranes showed good PEFC (up to 100 °C) and DMFC (up to 130 °C) performance. (v) Covalent‐ionically cross‐linked blend membranes by mixing polysulfonates with polysulfinates and polybases or by mixing a polysulfonate with a polymer carrying both sulfinate and basic N‐groups. The covalent‐ionically cross‐linked membranes were tested in a DMFC up to 110 °C and demonstrated good performance. (vi) Differently cross‐linked organic‐inorganic blend composite membranes via various procedures. The best results were obtained with blend membranes having a layered zirconium phosphate “ZrP” phase: they were transparent, and showed good H+‐conductivity and stability. The application of one of these composite membranes in a PEFC yielded good performance up to T = 115 °C.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Compared to some blend membrane systems based on acid-base interactions that have been investigated in the literature [18,19,31,32], the SPEEK/PSf-BTraz blend membranes presented here show higher proton conductivity than plain SPEEK membrane despite a decrease in the IEC values due to acid-base interactions.”
From Acid–base blend membranes consisting of sulfonated poly(ether ether ketone) and 5-amino-benzotriazole tethered polysulfone for DMFC (2010) · cites this paper as [19]
Citations
Cites
On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells
Kreuer, K. D. (2001) · Journal of Membrane Science · doi:10.1016/s0376-7388(00)00632-3 · Cited by 2,969
Proton Conductivity: Materials and Applications
Kreuer, K.-D. (1996) · Chemistry of Materials · doi:10.1021/cm950192a · Cited by 2,529
Acid‐Doped Polybenzimidazoles: A New Polymer Electrolyte
Wainright, J. S., Wang, J. ‐., Weng, D., Savinell, R. F., & Litt, M. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2044337 · Cited by 1,251
Development of ionomer membranes for fuel cells
Kerres, J. A. (2001) · Journal of Membrane Science · doi:10.1016/s0376-7388(00)00631-1 · Cited by 1,022
Self-citationSynthesis and characterization of sulfonated poly(ether ether ketone) for proton exchange membranes
Xing, P., Robertson, G. P., Guiver, M. D., Mikhailenko, S. D., Wang, K., & Kaliaguine, S. (2004) · Journal of Membrane Science · doi:10.1016/j.memsci.2003.09.019 · Cited by 1,007
Zaidi, S. M. J., Mikhailenko, S. D., Robertson, G. P., Guiver, M. D., & Kaliaguine, S. (2000) · Journal of Membrane Science · doi:10.1016/s0376-7388(00)00345-8 · Cited by 897
Non-Fluorinated Polymer Materials for Proton Exchange Membrane Fuel Cells
Rozière, J., & Jones, D. J. (2003) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.33.022702.154657 · Cited by 786
Conductivity of PBI Membranes for High-Temperature Polymer Electrolyte Fuel Cells
Ma, Y.-L., Wainright, J. S., Litt, M. H., & Savinell, R. F. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1630037 · Cited by 716
Jones, D. J., & Rozière, J. (2001) · Journal of Membrane Science · doi:10.1016/s0376-7388(00)00633-5 · Cited by 568
Composite Membranes for Medium-Temperature PEM Fuel Cells
Alberti, G., & Casciola, M. (2003) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.33.022702.154702 · Cited by 522
Research works printed but not linked: 18
- C. Stone L. Q. Hu T. Daynard C. Mah lecture 3rdInternational Symposium on New Materials for Electrochemical Systems Montreal Canada 1999.
- A. E. Steck C. Stone inProceedings of the Second International Symposium on New Materials for Fuel Cell and Modern Battery Systems (Eds. O. Savadogo P. R. Roberge) Montreal Canada 1997 p. 792.
- Percec S., 1986, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 19
- M. Schuster Ph.D. Thesis University of Mainz 2002 can be found underhttp://archimed.uni‐mainz.de/pub/2002/0017/diss.pdf.
- Aricò A. S., 1998, Electrochem. Solid‐State Lett., 66
- Kerres J., 2000, J. New Mater. Electrochem. Syst., 3, 229
- S. Motupally V. Lightner Hydrogen Fuel Cells and Infrastructure Technologies Program FY 2003 Progress Report U. S. Department of Energy Energy Efficiency and Renewable Energy 2003 pp. 7.
- D. J. Jones M. El Haddad B. Mula J. Rozière Environmental Research Forum “Chemistry and Energy” 1‐2(Ed. C. A. C. Sequeira) Transtec 1996 pp. 115.
- J. Rozière D. J. Jones Handbook of Fuel Cell Technology Vol. 3(Ed. W. Vielstich A. Lamm H. Gasteiger) John Wiley and Sons 2003 pp. 447.
- Bauer B., 2000, J. New Mater. Electrochem. Appl., 3, 87
- J. Kerres C.‐M. Tang C. Graf Ind. Eng. Chem. Res. in press can be found underhttp://pubs.acs.org/cgi‐bin/asap.cgi/iecred/asap/pdf/ie030762d.pdf.
- M. D. Guiver Ph.D. Thesis Carletown University Ottawa‐Ontario Canada 1987.
- Kerres J., 2003, J. New Mat. Electrochem. Syst., 223
- Kerres J., 2002, J. New Mat. Electrochem. Syst., 5, 97
- J. Kerres M. Hein W. Zhang N. Nicoloso S. Graf Invited lecture(J. Kerres) Fifth International Symposium “New Materials for Electrochemical Systems” Montreal Canada 2003. J. Kerres W. Zhang T. Häring J. New Mat. Electrochem. Syst. accepted.
- J. Kerres Invited lecture 204thMeeting of The Electrochemical Society proceedings submitted Orlando Florida 2003.
- J. Kerres Invited lecture Symposium “Advances in Materials for Proton Exchange Membrane Fuel Cell Systems” Asilomar California 2003.
- Meier F., 2002, J. New Mat. Electrochem. Syst., 5, 91
Cited by
Items 101–200 of 373
High performance sulfonated aromatic ionomers by solvothermal macromolecular synthesis
Vona, M. L. D., Alberti, G., Sgreccia, E., Casciola, M., & Knauth, P. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.02.159 · Cited by 59
Geormezi, M., Chochos, C. L., Gourdoupi, N., Neophytides, S. G., & Kallitsis, J. K. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.06.031 · Cited by 58
Branched Polymer Materials as Proton Exchange Membranes for Fuel Cell Applications
Neelakandan, S., Wang, L., Zhang, B., Ni, J., Hu, M., Gao, C., Wong, W., & Wang, L. (2021) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2021.1964524 · Cited by 58
Preparation and research progress of anion exchange membranes
Yu, R., Yang, H., Yu, X., Cheng, J., Tan, Y., & Wang, X. (2023) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2023.08.322 · Cited by 57
Xie, H., Wang, D., Tao, D., & Wang, L. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.03.064 · Cited by 57
García‐Salaberri, P. A. (2023) · Sustainable materials and technologies · doi:10.1016/j.susmat.2023.e00727 · Cited by 56
Wang, L., Li, K., Zhu, G., & Li, J. (2011) · Journal of Membrane Science · doi:10.1016/j.memsci.2011.06.015 · Cited by 56
Ren, J., Zhang, S., Liu, Y., Wang, Y., Pang, J., Wang, Q., & Wang, G. (2013) · Journal of Membrane Science · doi:10.1016/j.memsci.2013.01.056 · Cited by 56
Li, C., Yang, Z., Liu, X., Zhang, Y., Dong, J., Zhang, Q., & Cheng, H. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.09.166 · Cited by 56
Stability of acid-excess acid–base blend membranes in all-vanadium redox-flow batteries
Chromik, A., dos Santos, A. R., Turek, T., Kunz, U., Häring, T., & Kerres, J. A. (2014) · Journal of Membrane Science · doi:10.1016/j.memsci.2014.11.036 · Cited by 55
Self-citationKlose, C., Breitwieser, M., Vierrath, S., Klingele, M., Cho, H., Büchler, A., Kerres, J. A., & Thiele, S. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.06.080 · Cited by 55
Self-citationThermal Stability and Thermodynamic Properties of Hybrid Proton-Conducting Polyaryl Etherketones
Marani, D., Vona, M. L. D., Traversa, E., Licoccia, S., Beurroies, I., Llewellyn, P. L., & Knauth, P. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp062085h · Cited by 55
Water Activity Coefficient and Proton Mobility in Hydrated Acidic Polymers
Knauth, P., Sgreccia, E., Donnadio, A., Casciola, M., & Vona, M. L. D. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3515321 · Cited by 55
Hasani‐Sadrabadi, M. M., Dashtimoghadam, E., Mokarram, N., Majedi, F. S., & Jacob, K. I. (2012) · Polymer · doi:10.1016/j.polymer.2012.03.052 · Cited by 54
Jiang, Z., Zheng, X., Wu, H., & Pan, F. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.06.086 · Cited by 53
PPO-based acid–base polymer blend membranes for direct methanol fuel cells
Fu, R., Julius, D., Hong, L., & Lee, J. Y. (2008) · Journal of Membrane Science · doi:10.1016/j.memsci.2008.06.002 · Cited by 52
Ren, X., Li, H., Liu, K., Lu, H., Yang, J., & He, R. (2018) · Fibers and Polymers · doi:10.1007/s12221-018-8361-2 · Cited by 52
Acid–base hybrid polymer electrolyte membranes based on SPEEK
Xue, Y., Fu, R., Wu, C., Lee, J. Y., & Xu, T. (2009) · Journal of Membrane Science · doi:10.1016/j.memsci.2009.12.022 · Cited by 51
Lee, C. H., VanHouten, D. J., Lane, O. R., McGrath, J. E. E., Hou, J., Madsen, L. A., Spano, J., Wi, S., Cook, J. R., Xie, W., et al. (2011) · Chemistry of Materials · doi:10.1021/cm1032173 · Cited by 51
Krishnan, N. N., Henkensmeier, D., Jang, J. H., Kim, H., Rebbin, V., Oh, I., Hong, S., Nam, S.-W., & Lim, T. H. (2011) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.03.015 · Cited by 51
Novel imidazolium-functionalized anion-exchange polymer PBI blend membranes
Morandi, C. G., Peach, R., Krieg, H. M., & Kerres, J. A. (2014) · Journal of Membrane Science · doi:10.1016/j.memsci.2014.11.049 · Cited by 50
Self-citationLee, K., Jeong, M.-H., Lee, J.-P., Kim, Y.-J., & Lee, J. (2010) · Chemistry of Materials · doi:10.1021/cm101405h · Cited by 49
Hou, J., Li, J., Mountz, D. A., Hull, M., & Madsen, L. A. (2013) · Journal of Membrane Science · doi:10.1016/j.memsci.2013.08.019 · Cited by 48
Zhang, Y., Wang, H., Yu, W., & Shi, H. (2018) · ChemistrySelect · doi:10.1002/slct.201801548 · Cited by 48
Zhang, Y., Wan, Y., Zhang, G., Shao, K., Zhao, C., Li, H., & Na, H. (2009) · Journal of Membrane Science · doi:10.1016/j.memsci.2009.11.025 · Cited by 48
Wu, D., Wu, L., Woo, J., Yun, S.-H., Seo, S., Xu, T., & Moon, S. (2009) · Journal of Membrane Science · doi:10.1016/j.memsci.2009.10.052 · Cited by 47
Wang, J., Yue, Z., & Economy, J. (2007) · Journal of Membrane Science · doi:10.1016/j.memsci.2007.01.021 · Cited by 47
Crosslinked SPEEK membranes: Mechanical, thermal, and hydrothermal properties
Hou, H., Maranesi, B., Chailan, J., Khadhraoui, M., Polini, R., Vona, M. L. D., & Knauth, P. (2012) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2012.151 · Cited by 47
Tripathi, B. P., Saxena, A., & Shahi, V. K. (2008) · Journal of Membrane Science · doi:10.1016/j.memsci.2008.02.052 · Cited by 46
Gao, H., & Lian, K. K. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.053303jes · Cited by 46
Das, S., & Gibson, H. A. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229844 · Cited by 45
Applications of Charged Membranes in Separation, Fuel Cells, and Emerging Processes
Pourcelly, G., Nikonenko, V., Pismenskaya, N. D., & Yaroslavtsev, A. B. (2012) · Wiley eBooks · doi:10.1002/9781118165850.ch20 · Cited by 45
Feng, S., Shang, Y., Wang, Y., Liu, G., Xie, X., Dong, W., Xu, J., & Mathur, V. K. (2010) · Journal of Membrane Science · doi:10.1016/j.memsci.2010.01.040 · Cited by 45
Knauth, P., Pasquini, L., Maranesi, B., Pelzer, K., Polini, R., & Vona, M. L. D. (2013) · Fuel Cells · doi:10.1002/fuce.201200120 · Cited by 45
Gupta, D., & Choudhary, V. (2011) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.04.044 · Cited by 45
PEM Fuel Cell Materials: Costs, Performance and Durability
Bruijn, A. D. F., & Janssen, G. J. M. (2012) · Springer eBooks · doi:10.1007/978-1-4614-5785-5_9 · Cited by 44
Lee, K., Jeong, M.-H., Kim, Y.-J., Lee, S.-B., & Lee, J. (2012) · Chemistry of Materials · doi:10.1021/cm203539m · Cited by 44
Sulfonated aromatic ionomers: Analysis of proton conductivity and proton mobility
Knauth, P., & Vona, M. L. D. (2012) · Solid State Ionics · doi:10.1016/j.ssi.2012.01.043 · Cited by 44
Roelofs, K. S., Hirth, T., & Schiestel, T. (2011) · Materials Science and Engineering B · doi:10.1016/j.mseb.2011.02.029 · Cited by 44
Zhang, G., Guo, X., Fang, J., Chen, K., & Okamoto, K. (2008) · Journal of Membrane Science · doi:10.1016/j.memsci.2008.11.007 · Cited by 44
Dimitrov, I. V., Takamuku, S., Jankova, K., Jannasch, P., & Hvilsted, S. (2013) · Journal of Membrane Science · doi:10.1016/j.memsci.2013.09.016 · Cited by 43
Cross-linked sulfonated aromatic ionomers via SO 2 bridges: Conductivity properties
Vona, M. L. D., Pasquini, L., Narducci, R., Pelzer, K., Donnadio, A., Casciola, M., & Knauth, P. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.05.127 · Cited by 43
Hybrid composite membranes based on SPEEK and functionalized PPSU for PEM fuel cells
Sgreccia, E., Vona, M. L. D., & Knauth, P. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.11.073 · Cited by 42
The design and development of an HT-PEMFC test cell and test station
Rosli, R. E., Sulong, A. B., Daud, W. R. W., Zulkifley, M. A., Rosli, M. I., Majlan, E. H., Haque, M. A., & Radzuan, N. A. M. (2018) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2018.01.174 · Cited by 42
Jiang, J., Jiang, X., Xiao, M., Han, D., Wang, S., & Meng, Y. (2021) · ACS Applied Energy Materials · doi:10.1021/acsaem.1c03013 · Cited by 42
Bülbül, E., Atanasov, V. M., Marcus, M., Bürger, M., Chromik, A., Häring, T., & Kerres, J. A. (2018) · Journal of Membrane Science · doi:10.1016/j.memsci.2018.10.027 · Cited by 41
Self-citationZapata, P. J., Mountz, D. A., & Meredith, J. C. (2010) · Macromolecules · doi:10.1021/ma1011733 · Cited by 41
Liu, B., Kim, Y. S., Hu, W. Q., Robertson, G. P., Pivovar, B. S., & Guiver, M. D. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.08.088 · Cited by 41
Highly phosphonated polypentafluorostyrene: Characterization and blends with polybenzimidazole
Atanasov, V. M., Gudat, D., Ruffmann, B., & Kerres, J. A. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.09.002 · Cited by 41
Self-citationAn Overview of Polymer Electrolyte Membranes for Fuel Cell Applications
Page, K. A., & Rowe, B. W. (2012) · ACS symposium series · doi:10.1021/bk-2012-1096.ch009 · Cited by 41
Kang, N. R., Lee, Y. M., Shin, D. W., Hwang, D. S., Lee, K. H., Cho, D. H., Kim, J. H., & Lee, Y. M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.01.051 · Cited by 40
Chen, C., Shen, C., Kong, G., & Gao, S. (2013) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2013.02.017 · Cited by 40
Kerres, J. A. (2015) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2015.1011754 · Cited by 39
Self-citationZhang, D., & Yan, L. (2010) · The Journal of Physical Chemistry B · doi:10.1021/jp1054606 · Cited by 39
Xu, J., Cheng, H., Ma, L., Han, H., & Wang, Z. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.06.004 · Cited by 39
Sulfonated polyimides bearing benzimidazole groups for direct methanol fuel cell applications
Chen, K., Hu, Z., Endo, N., Fang, J., Higa, M., & Okamoto, K. (2010) · Journal of Membrane Science · doi:10.1016/j.memsci.2010.01.053 · Cited by 39
Optimizing end-group cross-linkable polymer electrolytes for fuel cell applications
Lee, K., Jeong, M.-H., Lee, J., Pivovar, B. S., & Kim, Y. S. (2010) · Journal of Membrane Science · doi:10.1016/j.memsci.2010.02.014 · Cited by 39
Zhu, Y., Zieren, S., & Manthiram, A. (2011) · Chemical Communications · doi:10.1039/c1cc11474c · Cited by 39
Xue, Y., & Chan, S. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.11.129 · Cited by 38
Covalent‐Ionically Cross‐linked Poly(Etheretherketone)‐Basic Polysulfone Blend Ionomer Membranes
Kerres, J. A. (2006) · Fuel Cells · doi:10.1002/fuce.200500207 · Cited by 38
Self-citationSPPSU-based hybrid proton conducting polymeric electrolytes for intermediate temperature PEMFCs
Licoccia, S., Vona, M. L. D., D’Epifanio, A., Ahmed, Z., Bellitto, S., Marani, D., Mecheri, B., de Bonis, C., Trombetta, M., & Traversa, E. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.01.071 · Cited by 38
Papadimitriou, K. D., Geormezi, M., Neophytides, S. G., & Kallitsis, J. K. (2013) · Journal of Membrane Science · doi:10.1016/j.memsci.2012.12.051 · Cited by 36
Influence of Methanol Crossover on the Fuel Utilization of Passive Direct Methanol Fuel Cell
Lai, Q., Yin, G., Wang, Z., Du, C., Zuo, P., & Cheng, X. (2008) · Fuel Cells · doi:10.1002/fuce.200700066 · Cited by 36
Park, J. W., Wycisk, R. J., Pintauro, P. N., Yarlagadda, V., & Nguyen, T. V. (2016) · Materials · doi:10.3390/ma9030143 · Cited by 36
Jeong, M.-H., Lee, K., & Lee, J. (2009) · Journal of Membrane Science · doi:10.1016/j.memsci.2009.03.035 · Cited by 35
Membranes for low and medium temperature fuel cells. State-of-the-art and new trends
Pourcelly, G. (2011) · Petroleum Chemistry · doi:10.1134/s0965544111070103 · Cited by 35
Preparation and Characterization of Stable Ionomers and Ionomer Membranes for Fuel Cells
Mitov, S., Vogel, B., Roduner, E., Zhang, H., Zhu, X., Gogel, V., Jörissen, L., Hein, M., Xing, D., Schönberger, F., et al. (2006) · Fuel Cells · doi:10.1002/fuce.200600034 · Cited by 35
Self-citationMn2(CO)10-photomediated synthesis of poly(vinylidene fluoride)-b-poly(styrene sulfonate)
Černoch, P., Petrova, S. L., Černochová, Z., Kim, J.-S., Simpson, C. P., & Asandei, A. D. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.05.013 · Cited by 34
Abu-Thabit, N. Y., Ali, S. A., Zaidi, S. M. J., & Mezghani, K. (2012) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2012.145 · Cited by 34
Zhang, Q. M., Zhang, Q., Zhang, S., & Li, S. (2010) · Journal of Membrane Science · doi:10.1016/j.memsci.2010.02.068 · Cited by 33
Kwon, S., Lee, B., & Kim, T. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.06.040 · Cited by 32
Schönberger, F., Chromik, A., & Kerres, J. A. (2009) · Polymer · doi:10.1016/j.polymer.2009.02.043 · Cited by 32
Self-citationOssiander, T., Perchthaler, M., Heinzl, C., Schönberger, F., Völk, P., Welsch, M., Chromik, A., Hacker, V., & Scheu, C. (2016) · Journal of Membrane Science · doi:10.1016/j.memsci.2016.02.037 · Cited by 31
Ballengee, J. B., Haugen, G. M., Hamrock, S. J., & Pintauro, P. N. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.088304jes · Cited by 30
Multilayer Sulfonated Polyaromatic PEMFC Membranes
Marrony, M., Rozière, J., Jones, D. J., & Lindheimer, A. (2005) · Fuel Cells · doi:10.1002/fuce.200500227 · Cited by 30
Directly Probing the Metal Center Environment in Layered Zirconium Phosphates by Solid-State91Zr NMR
Yan, Z., Kirby, C. W., & Huang, Y. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp711137c · Cited by 30
Composites of Proton-Conducting Polymer Electrolyte Membrane in Direct Methanol Fuel Cells
Kundu, P. P., Sharma, V. K., & Shul, Y. (2007) · Critical reviews in solid state and materials sciences/CRC critical reviews in solid state and materials sciences · doi:10.1080/10408430701364354 · Cited by 29
Fuel cell performance of pendent methylphenyl sulfonated poly(ether ether ketone ketone)s
Zhang, H., Stanis, R. J., Song, Y., Hu, W. Q., Cornelius, C. J., Shi, Q., Liu, B., & Guiver, M. D. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.09.053 · Cited by 29
Yang, A. C. C., Narimani, R., Frisken, B. J., & Holdcroft, S. (2014) · Journal of Membrane Science · doi:10.1016/j.memsci.2014.06.041 · Cited by 29
Lee, S., Nam, K., Seo, K., Kim, G., & Han, H. (2020) · Polymers · doi:10.3390/polym12071604 · Cited by 28
Nuclear magnetic resonance of polymer electrolyte membrane fuel cells
Suarez, S. N., & Greenbaum, S. (2010) · The Chemical Record · doi:10.1002/tcr.201000010 · Cited by 28
Synthesis of highly sulfonated polybenzimidazoles by direct copolymerization and grafting
Kulkarni, M. P., Peckham, T. J., Thomas, O. D., & Holdcroft, S. (2013) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.26764 · Cited by 28
Wang, J., Song, Y., Zhang, C., Ye, Z., Liu, H., Lee, M., Wang, D., & Ji, J. (2008) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200700610 · Cited by 28
Ormosil/Sulfonated Polyetheretherketone-Based Hybrid Composite Proton Conducting Membranes
Licoccia, S., Vona, M. L. D., D’Epifanio, A., Marani, D., Vittadello, M., Jayakody, J. R. P., & Greenbaum, S. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2194648 · Cited by 28
Peach, R., Krieg, H. M., Krüger, A. J., van der Westhuizen, D., Bessarabov, D., & Kerres, J. A. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.10.023 · Cited by 27
Self-citationArumugham, T., Kaleekkal, N. J., & Mohan, D. R. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.41986 · Cited by 27
Sulfonated Aromatic Polymers as Proton-Conducting Solid Electrolytes for Fuel Cells: a Short Review
Vona, M. L. D., & Knauth, P. (2013) · Zeitschrift für Physikalische Chemie · doi:10.1524/zpch.2013.0337 · Cited by 27
Li, H., Ren, X., Dong, J., Che, X., Liu, R., & Yang, J. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0211915jes · Cited by 27
Καλαμαράς, Ι., Daletou, M. K., Neophytides, S. G., & Kallitsis, J. K. (2012) · Journal of Membrane Science · doi:10.1016/j.memsci.2012.04.057 · Cited by 27
Polymer electrolyte membrane fuel cells
Hartnig, C., Jörissen, L., Kerres, J. A., Lehnert, W., & Scholta, J. (2008) · Elsevier eBooks · doi:10.1533/9781845694838.101 · Cited by 27
Self-citationHande, V. R., Rath, S. K., Rao, S. S., Praveen, S., Sasane, S., & Patri, M. (2015) · Journal of Membrane Science · doi:10.1016/j.memsci.2015.10.044 · Cited by 26
Degradation studies on acid–base blends for both LT and intermediate T fuel cells
Chromik, A., & Kerres, J. A. (2013) · Solid State Ionics · doi:10.1016/j.ssi.2013.05.017 · Cited by 26
Self-citationFuture of analytical chemistry with graphene
Keçili, R., Arlı, G., & Hussain, C. M. (2020) · Comprehensive analytical chemistry · doi:10.1016/bs.coac.2020.09.003 · Cited by 25
Balasubramanian, A., Gunasekaran, M., & Kannan, T. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111418 · Cited by 25
Zhang, B., Yang, Z., Liu, Q., Liu, Y., Fu, Y., Zhang, X., Jiang, S., Zhang, X., Zhang, E., Wang, K., et al. (2023) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c02436 · Cited by 25
Polyimide Proton Exchange Membranes
Fang, J. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-812640-0.00007-x · Cited by 25
Alternative Proton Exchange Membranes by Chain-Growth Polymerization
Tsang, E. M. W., & Holdcroft, S. (2012) · Elsevier eBooks · doi:10.1016/b978-0-444-53349-4.00285-5 · Cited by 25
Control of Morphology and Crystallization in Polyelectrolyte/Polymer Blends
Gibon, C. M., Norvez, S., Tencé‐Girault, S., & Goldbach, J. T. (2008) · Macromolecules · doi:10.1021/ma800612t · Cited by 25
Guhathakurta, S., & Min, K. (2008) · Polymer · doi:10.1016/j.polymer.2008.12.035 · Cited by 25
Su, T., Zhao, W., & Yang, J. (2026) · Chemical Communications · doi:10.1039/d6cc01260d · Cited by 25
Metadata
- Authors
- Kerres, J. A.
- Corresponding author
- Kerres, J. A.
- ORCID
- Kerres, J. A.
- Venue
- Fuel Cells
- Publisher
- Wiley
- Published
- 2005-04
- Volume
- 5
- Issue
- 2
- Pages
- 230-247
- ISSN
- 1615-6846 (ISSN-L)
- 1615-6854
- OpenAlex
- W2048834239
- Semantic Scholar
- 25e486fc23d2942849bec9e54d5c8d95b269f4f9
- Cited by
- 341
- References
- 61
- Citations by year
- 2026: 5 · 2025: 5 · 2024: 4 · 2023: 5 · 2022: 7 · 2021: 10 · 2020: 10 · 2019: 7 · 2018: 17 · 2017: 8 · 2016: 18 · 2015: 15 · 2014: 20 · 2013: 24 · 2012: 29
- FWCI
- 21.85
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Fuel Cells (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Chemical Engineering › Filtration and Separation › Membrane Separation and Gas Transport
- Physical Sciences › Chemical Engineering › Filtration and Separation › Membrane-based Ion Separation Techniques
- Keywords
- ionomer membranes, proton exchange membrane fuel cells, direct methanol fuel cells, covalent cross-linking, S-alkylation, zirconium phosphate, organic-inorganic hybrid membranes
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.