Blended and cross-linked ionomer membranes for application in membrane fuel cells
The DOI matches its Crossref record; 61 of the 61 references it cites were found in a registry or an index.
Abstract
Differently cross‐linked blend membranes were prepared from commercial arylene main‐chain polymers of the poly(etherketone) and poly(ethersulfone) classes, modified with sulfonate groups, sulfinate cross‐linking groups, and basic N‐groups. The following membrane types have been prepared: (i) Van‐der Waals/dipole‐dipole blends by mixing a polysulfonate with unmodified PSU. This membrane type showed a heterogeneous morphology, leading to extreme swelling and even dissolution of the sulfonated component at elevated temperatures. (ii) Hydrogen bridge blends by mixing a polysulfonate with a polyamide or a polyetherimide. This membrane type showed a partially heterogeneous morphology, also leading to extreme swelling/dissolution of the sulfonated blend component at elevated temperatures. (iii) Acid‐base blends by mixing a polysulfonate with a polymeric N‐base (in‐house developed/commercial). A wide range of properties could be achieved with this membrane type by variation of the different parameters. Membranes showing excellent stability and good fuel cell performance up to 100 °C (PEFC) and 130 °C (DMFC) were obtained. (iv) Covalently cross‐linked (blend) membranes by either mixing a polysulfonate with a polysulfinate or by preparing a polysulfinatesulfonate, followed by reaction of the sulfinate groups in solution with a dihalogeno compound under S‐alkylation. The membranes prepared showed effective suppression of swelling without a loss in the H+‐conductivity. The membranes showed good PEFC (up to 100 °C) and DMFC (up to 130 °C) performance. (v) Covalent‐ionically cross‐linked blend membranes by mixing polysulfonates with polysulfinates and polybases or by mixing a polysulfonate with a polymer carrying both sulfinate and basic N‐groups. The covalent‐ionically cross‐linked membranes were tested in a DMFC up to 110 °C and demonstrated good performance. (vi) Differently cross‐linked organic‐inorganic blend composite membranes via various procedures. The best results were obtained with blend membranes having a layered zirconium phosphate “ZrP” phase: they were transparent, and showed good H+‐conductivity and stability. The application of one of these composite membranes in a PEFC yielded good performance up to T = 115 °C.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Compared to some blend membrane systems based on acid-base interactions that have been investigated in the literature [18,19,31,32], the SPEEK/PSf-BTraz blend membranes presented here show higher proton conductivity than plain SPEEK membrane despite a decrease in the IEC values due to acid-base interactions.”
From Acid–base blend membranes consisting of sulfonated poly(ether ether ketone) and 5-amino-benzotriazole tethered polysulfone for DMFC (2010) · cites this paper as [19]
Citations
Cites
On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells
Kreuer, K. D. (2001) · Journal of Membrane Science · doi:10.1016/s0376-7388(00)00632-3 · Cited by 2,969
Proton Conductivity: Materials and Applications
Kreuer, K.-D. (1996) · Chemistry of Materials · doi:10.1021/cm950192a · Cited by 2,529
Acid‐Doped Polybenzimidazoles: A New Polymer Electrolyte
Wainright, J. S., Wang, J. ‐., Weng, D., Savinell, R. F., & Litt, M. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2044337 · Cited by 1,251
Development of ionomer membranes for fuel cells
Kerres, J. A. (2001) · Journal of Membrane Science · doi:10.1016/s0376-7388(00)00631-1 · Cited by 1,022
Self-citationSynthesis and characterization of sulfonated poly(ether ether ketone) for proton exchange membranes
Xing, P., Robertson, G. P., Guiver, M. D., Mikhailenko, S. D., Wang, K., & Kaliaguine, S. (2004) · Journal of Membrane Science · doi:10.1016/j.memsci.2003.09.019 · Cited by 1,007
Zaidi, S. M. J., Mikhailenko, S. D., Robertson, G. P., Guiver, M. D., & Kaliaguine, S. (2000) · Journal of Membrane Science · doi:10.1016/s0376-7388(00)00345-8 · Cited by 897
Non-Fluorinated Polymer Materials for Proton Exchange Membrane Fuel Cells
Rozière, J., & Jones, D. J. (2003) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.33.022702.154657 · Cited by 786
Conductivity of PBI Membranes for High-Temperature Polymer Electrolyte Fuel Cells
Ma, Y.-L., Wainright, J. S., Litt, M. H., & Savinell, R. F. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1630037 · Cited by 716
Jones, D. J., & Rozière, J. (2001) · Journal of Membrane Science · doi:10.1016/s0376-7388(00)00633-5 · Cited by 568
Composite Membranes for Medium-Temperature PEM Fuel Cells
Alberti, G., & Casciola, M. (2003) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.33.022702.154702 · Cited by 522
Research works printed but not linked: 18
- C. Stone L. Q. Hu T. Daynard C. Mah lecture 3rdInternational Symposium on New Materials for Electrochemical Systems Montreal Canada 1999.
- A. E. Steck C. Stone inProceedings of the Second International Symposium on New Materials for Fuel Cell and Modern Battery Systems (Eds. O. Savadogo P. R. Roberge) Montreal Canada 1997 p. 792.
- Percec S., 1986, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 19
- M. Schuster Ph.D. Thesis University of Mainz 2002 can be found underhttp://archimed.uni‐mainz.de/pub/2002/0017/diss.pdf.
- Aricò A. S., 1998, Electrochem. Solid‐State Lett., 66
- Kerres J., 2000, J. New Mater. Electrochem. Syst., 3, 229
- S. Motupally V. Lightner Hydrogen Fuel Cells and Infrastructure Technologies Program FY 2003 Progress Report U. S. Department of Energy Energy Efficiency and Renewable Energy 2003 pp. 7.
- D. J. Jones M. El Haddad B. Mula J. Rozière Environmental Research Forum “Chemistry and Energy” 1‐2(Ed. C. A. C. Sequeira) Transtec 1996 pp. 115.
- J. Rozière D. J. Jones Handbook of Fuel Cell Technology Vol. 3(Ed. W. Vielstich A. Lamm H. Gasteiger) John Wiley and Sons 2003 pp. 447.
- Bauer B., 2000, J. New Mater. Electrochem. Appl., 3, 87
- J. Kerres C.‐M. Tang C. Graf Ind. Eng. Chem. Res. in press can be found underhttp://pubs.acs.org/cgi‐bin/asap.cgi/iecred/asap/pdf/ie030762d.pdf.
- M. D. Guiver Ph.D. Thesis Carletown University Ottawa‐Ontario Canada 1987.
- Kerres J., 2003, J. New Mat. Electrochem. Syst., 223
- Kerres J., 2002, J. New Mat. Electrochem. Syst., 5, 97
- J. Kerres M. Hein W. Zhang N. Nicoloso S. Graf Invited lecture(J. Kerres) Fifth International Symposium “New Materials for Electrochemical Systems” Montreal Canada 2003. J. Kerres W. Zhang T. Häring J. New Mat. Electrochem. Syst. accepted.
- J. Kerres Invited lecture 204thMeeting of The Electrochemical Society proceedings submitted Orlando Florida 2003.
- J. Kerres Invited lecture Symposium “Advances in Materials for Proton Exchange Membrane Fuel Cell Systems” Asilomar California 2003.
- Meier F., 2002, J. New Mat. Electrochem. Syst., 5, 91
Cited by
Items 201–300 of 373
Impedance spectroscopy study of dehydrated chitosan and chitosan containing LiClO4
Costa, M. M., Terezo, A. J., Matos, A. L., Moura, W. A., Giacometti, J. A., & Sombra, A. S. B. (2010) · Physica B Condensed Matter · doi:10.1016/j.physb.2010.08.011 · Cited by 24
Norris, B. C., Li, W., Lee, E., Manthiram, A., & Bielawski, C. W. (2010) · Polymer · doi:10.1016/j.polymer.2010.09.041 · Cited by 24
Li, W., Fu, Y.-Z., Manthiram, A., & Guiver, M. D. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3040242 · Cited by 23
How to improve Nafion with tailor made annealing
Narducci, R., Knauth, P., Chailan, J., & Vona, M. L. D. (2018) · RSC Advances · doi:10.1039/c8ra04808h · Cited by 23
Tsai, J.-C., Lin, C.-K., Kuo, J., & Chen, C. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.01.057 · Cited by 23
Acid–base blend membranes based on Nafion®/aminated SPEEK for reducing methanol permeability
Tsai, J.-C., & Lin, C.-K. (2010) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2010.07.003 · Cited by 23
Dimitrov, I. V., Jankova, K., & Hvilsted, S. (2010) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.23974 · Cited by 23
Membranes for High Temperature PEMFC Based on Acid‐Doped Polybenzimidazoles
Li, Q., & Jensen, J. O. (2007) · Wiley eBooks · doi:10.1002/9783527622146.ch3 · Cited by 23
Xu, N., Guo, X., Fang, J., Yin, J., Yuan, M., & Chen, B. W. C. (2009) · Fuel Cells · doi:10.1002/fuce.200800154 · Cited by 23
Lee, S.-B., Kim, Y.-J., Ko, U., Min, C., Ahn, M., Chung, S.-J., Moon, I. S., & Lee, J. (2014) · Journal of Membrane Science · doi:10.1016/j.memsci.2013.12.080 · Cited by 22
Xie, H., Liu, D., Xiang, X., Zhu, C., & Wang, L. (2016) · Journal of Materials Science · doi:10.1007/s10853-016-9974-8 · Cited by 22
Yu, J., Dong, C., Liu, J., Li, C., Fang, J., & Guan, R. (2009) · Journal of Materials Science · doi:10.1007/s10853-009-4033-3 · Cited by 22
Side-chain-type clustered sulfonated poly(arylene ether ketone)s prepared by click chemistry
Qi, Z., Gong, C., Yu, L., Li, H., Wu, Z., Feng, W.-S., Wang, Y., Zhang, S., & Li, Y. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.05.142 · Cited by 21
Xu, T., Wu, D., Seo, S., Woo, J., Wu, L., & Moon, S. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.35494 · Cited by 21
Zhou, T., He, X., Song, F., & Xie, K. (2016) · International Journal of Electrochemical Science · doi:10.1016/s1452-3981(23)15867-6 · Cited by 21
Xu, J., Cheng, H., Ma, L., Han, H., Huang, Y., & Wang, Z. (2014) · Journal of Polymer Research · doi:10.1007/s10965-014-0423-6 · Cited by 21
Schönberger, F., Chromik, A., & Kerres, J. A. (2010) · Polymer · doi:10.1016/j.polymer.2010.07.022 · Cited by 21
Self-citationVöge, A., Deimede, V. A., & Kallitsis, J. K. (2011) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.25006 · Cited by 20
Mong, A. L., & Kim, D. (2016) · Solid State Ionics · doi:10.1016/j.ssi.2016.04.004 · Cited by 19
Mahajan, C. V., & Ganesan, V. (2013) · The Journal of Physical Chemistry B · doi:10.1021/jp3121512 · Cited by 19
Sinirlioglu, D., Çelik, S. Ü., Müftüoğlu, A. E., & Bozkurt, A. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.40107 · Cited by 19
Nguyen, M. D. T., & Kim, D. (2014) · Solid State Ionics · doi:10.1016/j.ssi.2014.12.012 · Cited by 18
Macromolecular antioxidants for chemically durable polymer electrolyte fuel cell membranes
Kodir, A., Shin, S., Park, H. S., Arbi, M. R., Yang, T., Lee, H., Shin, D., & Bae, B. (2021) · International Journal of Energy Research · doi:10.1002/er.7607 · Cited by 18
Comparative study of the cation permeability of protonic, anionic and ampholytic membranes
Knauth, P., Pasquini, L., & Vona, M. L. D. (2016) · Solid State Ionics · doi:10.1016/j.ssi.2016.12.015 · Cited by 18
Ionomer Membrane and MEA Development for DMFC
Gogel, V., Jörissen, L., Chromik, A., Schönberger, F., Lee, J., Schäfer, M., Krajinovic, K., & Kerres, J. A. (2008) · Separation Science and Technology · doi:10.1080/01496390802414759 · Cited by 17
Self-citationLoLiPEM: Long life proton exchange membrane fuel cells
Barbieri, G., Brunetti, A., Vona, M. L. D., Sgreccia, E., Knauth, P., Hou, H., Hempelmann, R., Arena, F., Beretta, L. D., Bauer, B., et al. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.10.096 · Cited by 16
Filimon, A., Dobos, A. M., & Musteata, V. E. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115300 · Cited by 16
Xu, S., Wu, Y., Adamski, M., Fraser, K., & Holdcroft, S. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta08203a · Cited by 16
Membranes for a Regenerative H2/Br2 Fuel Cell
Park, J. W., Wycisk, R. J., & Pintauro, P. N. (2013) · ECS Transactions · doi:10.1149/05002.1217ecst · Cited by 15
Hu, J., Luo, J., Wagner, P., Agert, C., & Conrad, O. (2011) · Fuel Cells · doi:10.1002/fuce.201000148 · Cited by 15
Nielsen, M. M., Yang, A. C. C., Jankova, K., Hvilsted, S., & Holdcroft, S. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11347g · Cited by 15
Kultys, A. (2010) · Wiley eBooks · doi:10.1002/0471440264.pst355.pub2 · Cited by 15
Stabilized SPEEK Membranes with a High Degree of Sulfonation for Enthalpy Heat Exchangers
Narducci, R., Vona, M. L. D., Marrocchi, A., & Baldinelli, G. (2018) · Coatings · doi:10.3390/coatings8050190 · Cited by 14
Research Progress in Energy Based on Polyphosphazene Materials in the Past Ten Years
Zhou, Z., Jiang, Z. W., Chen, F., Kuang, T., Zhou, D., & Meng, F. (2022) · Polymers · doi:10.3390/polym15010015 · Cited by 14
Gao, S., Zhao, C., & Na, H. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.04.060 · Cited by 14
Sulfonated Poly(aryl ether)‐Type Polymers as Proton Exchange Membranes: Synthesis and Performance
Liu, B., Kim, D., Guiver, M. D., Kim, Y. S., & Pivovar, B. S. (2007) · Wiley eBooks · doi:10.1002/9783527622146.ch1 · Cited by 14
Xu, K., Chanthad, C., Hickner, M. A., & Wang, Q. (2010) · Journal of Materials Chemistry · doi:10.1039/c000044b · Cited by 14
Polymer Electrolyte Membrane Fuel Cells
Jörissen, L., & Garche, J. (2015) · Springer eBooks · doi:10.1007/978-3-662-44972-1_14 · Cited by 14
Sulfonated poly(styrene)s‐PBIOO® blend membranes: Thermo‐oxidative stability and conductivity
Kerres, J. A., Katzfuß, A., Chromik, A., & Atanasov, V. M. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39889 · Cited by 12
Self-citationLee, J., Kim, K., Khan, S. B., Han, P., Seo, J., Jang, W., & Han, H. (2014) · Journal of Nanomaterials · doi:10.1155/2014/460232 · Cited by 12
Polybenzimidazole Membranes by Post Acid Doping
Aili, D., Jensen, J. O., & Li, Q. (2015) · Springer eBooks · doi:10.1007/978-3-319-17082-4_9 · Cited by 12
Branco, C. M., El-Kharouf, A., & Du, S. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.09261-4 · Cited by 12
Bender, J., Mayerhöfer, B., Trinke, P., Bensmann, B., Hanke‐Rauschenbach, R., Krajinovic, K., Thiele, S., & Kerres, J. A. (2021) · Polymers · doi:10.3390/polym13203467 · Cited by 12
Self-citationA Comparative Study on Sulfonated PEEK and PVDF Blend Membranes for Direct Methanol Fuel Cells
Dönmez, G., & Deligöz, H. (2015) · International Journal of Membrane Science and Technology · doi:10.15379/ijmst.v2i2.478 · Cited by 12
Ionically Cross‐Linked Proton Conducting Membranes for Fuel Cells
Wu, L., Zhou, D., Wang, H., Pan, Q., Ran, J., & Xu, T. (2014) · Fuel Cells · doi:10.1002/fuce.201300296 · Cited by 12
Thankamony, R. L., Lee, M.-G., Kim, K., Hong, J., Kim, T., Lee, H.-J., Kim, H., Nam, S., & Lim, Y. (2010) · Macromolecular Research · doi:10.1007/s13233-010-1016-9 · Cited by 12
PEM Fuel Cell Materials: Costs, Performance, and Durability
Bruijn, A. D. F., & Janssen, G. J. M. (2018) · Springer eBooks · doi:10.1007/978-1-4939-7789-5_152 · Cited by 12
Stabilized Sulfonated Aromatic Polymers by in situ Solvothermal Cross-Linking
Vona, M. L. D., Sgreccia, E., Narducci, R., Pasquini, L., Hou, H., & Knauth, P. (2014) · Frontiers in Energy Research · doi:10.3389/fenrg.2014.00039 · Cited by 12
Proton Exchange Membrane Fuel Cells: High-Temperature, Low-Humidity Operation
Hamrock, S. J., & Herring, A. M. (2012) · Springer eBooks · doi:10.1007/978-1-4419-0851-3_155 · Cited by 12
Jin, J., Zhao, J., Shen, S., Yu, J., Cheng, S., Pan, B., & Che, Q. (2020) · Nanotechnology · doi:10.1088/1361-6528/ab71b5 · Cited by 11
Opperman, H., Kerres, J. A., & Krieg, H. M. (2012) · Journal of Membrane Science · doi:10.1016/j.memsci.2012.06.002 · Cited by 11
Self-citationLee, M.-J., Choi, Y. S., Kang, Y. S., Choi, J., & Kang, M. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm33267a · Cited by 11
Ion Pair Reinforced Semi-Interpenetrating Polymer Network for Direct Methanol Fuel Cell Applications
Fang, C., Julius, D., Tay, S. W., Hong, L., & Lee, J. Y. (2012) · The Journal of Physical Chemistry B · doi:10.1021/jp2081353 · Cited by 11
Synthesis of Proton Conductive Polymers with High Electrochemical Selectivity
Xu, K., Li, K., Ewing, C. S., Hickner, M. A., & Wang, Q. (2010) · Macromolecules · doi:10.1021/ma902716x · Cited by 11
Doping Nafion® matrix by p-aramid flakes for a proton transport less reliant on moisture
Guo, B., Liu, Z., & Hong, L. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12057c · Cited by 10
Daiko, Y., Katayama, H., Araki, T., Mineshige, A., Kobune, M., Yusa, S., Yazawa, T., Nagasaka, K., Murata, S., Matsumoto, S., et al. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp8086094 · Cited by 10
Sutradhar, S. C., Yoon, S., Ryu, T., Jin, L., Zhang, W., Kim, W., & Jang, H. (2021) · Membranes · doi:10.3390/membranes11030168 · Cited by 10
de Bonis, C., D’Epifanio, A., Vona, M. L. D., Mecheri, B., Traversa, E., Trombetta, M., & Licoccia, S. (2010) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.23987 · Cited by 10
Varnado, C. D., Zhao, X., Ortiz, M., Zuo, Z., Jiang, Z., Manthiram, A., & Bielawski, C. W. (2013) · RSC Advances · doi:10.1039/c3ra44851g · Cited by 10
Novel anode based on sulfonated polysulfone for medium temperature direct methanol fuel cells
Mack, F., Gogel, V., Jörissen, L., & Kerres, J. A. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.118 · Cited by 9
Self-citationKuo, P., Liang, W., Hsu, C., & Jheng, W.-H. (2008) · Polymer · doi:10.1016/j.polymer.2008.01.068 · Cited by 9
Bhavani, P., & Dharmalingam, S. (2015) · International Journal of Plastics Technology · doi:10.1007/s12588-015-9103-6 · Cited by 9
Kuo, P. ‐., Jheng, W.-C., Liang, W., & Chen, W. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.03.068 · Cited by 9
Wang, J., Yu, H., Lee, M., Zhang, S., & Wang, D. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.34989 · Cited by 9
Kakati, N., Das, G., & Yoon, Y. S. (2016) · Journal of the Korean Physical Society · doi:10.3938/jkps.68.311 · Cited by 9
Julius, D., Lee, J. Y., & Hong, L. (2021) · Materials · doi:10.3390/ma14071617 · Cited by 9
Sulfonated hydrocarbon graft architectures for cation exchange membranes
Nielsen, M. M., Jankova, K., & Hvilsted, S. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.07.029 · Cited by 9
Vernersson, T., Lafitte, B., Lindbergh, G., & Jannasch, P. (2006) · Fuel Cells · doi:10.1002/fuce.200500231 · Cited by 9
Titvinidze, G., Kaltbeitzel, A., Manhart, A., & Meyer, W. H. (2010) · Fuel Cells · doi:10.1002/fuce.200900151 · Cited by 9
Fu, T., Zhong, S., Cui, Z., Zhao, C., Shi, Y., Yu, W., Na, H., & Xing, W. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.29150 · Cited by 9
Alberti, G., & Casciola, M. (2007) · Wiley eBooks · doi:10.1002/9783527622146.ch4 · Cited by 9
Formation and mechanical characterization of ionically crosslinked membranes at oil–water interfaces
Yuan, W., Laprade, E. J., Henderson, K. J., & Shull, K. R. (2014) · Soft Matter · doi:10.1039/c3sm51943k · Cited by 8
Aliabadi, M., Ebadi, M., Dashtimoghadam, E., Mirsasaani, S. S., Majedi, F. S., & Hasani‐Sadrabadi, M. M. (2011) · Journal of Macromolecular Science Part B · doi:10.1080/00222348.2010.497705 · Cited by 8
Acid–Base Chemistry and Proton Conductivity
Li, Q., Aili, D., Savinell, R. F., & Jensen, J. O. (2015) · Springer eBooks · doi:10.1007/978-3-319-17082-4_3 · Cited by 8
Preparation of a new class of phosphonated hydrocarbon polymers based on polysulfone
Martschin, P., Prölß, T., Hutzler, A., Thiele, S., & Kerres, J. A. (2025) · Polymer Chemistry · doi:10.1039/d4py01289e · Cited by 7
Self-citationMembrane preparation from hyperbranched perfluorinated polymers
Quast, M. J., & Mueller, A. (2019) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.29348 · Cited by 7
Tosto, S., Knauth, P., & Vona, M. L. D. (2012) · Solid State Ionics · doi:10.1016/j.ssi.2012.01.002 · Cited by 7
Zheng, P., Xu, M., Liu, X., & Jia, K. (2016) · Ionics · doi:10.1007/s11581-016-1805-z · Cited by 7
PEM Fuel Cell Materials: Costs, Performance and Durability
Bruijn, A. D. F., & Janssen, G. J. M. (2012) · Springer eBooks · doi:10.1007/978-1-4419-0851-3_152 · Cited by 7
Proton Exchange Membranes for H2 Fuel Cell Applications
Mauritz, K. A., Nalawade, A., & Hassan, M. K. (2012) · Springer eBooks · doi:10.1007/978-1-4614-1957-0_5 · Cited by 6
6 Materials, Proton Conductivity and Electrocatalysis in High-Temperature PEM Fuel Cells
Daletou, M. K., Kallitsis, J. K., & Neophytides, S. G. (2011) · Modern aspects of electrochemistry · doi:10.1007/978-1-4419-5580-7_6 · Cited by 6
Ren, J., Zhang, S., Wang, Q., Geng, Z., & Wang, G. (2012) · High Performance Polymers · doi:10.1177/0954008312459866 · Cited by 6
Peach, R., Krieg, H. M., Krüger, A. J., Rossouw, J. J. C., Bessarabov, D., & Kerres, J. A. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.05.246 · Cited by 6
Self-citationProton Exchange Membrane Fuel Cells: High-Temperature, Low-Humidity Operation
Hamrock, S. J., & Herring, A. M. (2012) · Springer eBooks · doi:10.1007/978-1-4614-5785-5_17 · Cited by 6
Pitia, E., Batra, S., Çakmak, M., Shaw, M. T., & Weiss, R. A. (2021) · Polymer Engineering and Science · doi:10.1002/pen.25774 · Cited by 6
Pintauro, P. N., & Wycisk, R. J. (2008) · Wiley eBooks · doi:10.1002/9780470276280.ch29 · Cited by 6
sPEEK based composite membranes for direct ethanol fuel cell applications
Roelofs, K. S., & Schiestel, T. (2009) · Desalination · doi:10.1016/j.desal.2009.09.105 · Cited by 6
PEM Fuel Cell Materials: Costs, Performance and Durability
Bruijn, A. D. F., & Janssen, G. J. M. (2017) · Springer eBooks · doi:10.1007/978-1-4939-2493-6_152-3 · Cited by 6
Thankamony, R. L., Baek, G., Kim, H., Nam, S., & Kim, T. (2010) · Bulletin of the Korean Chemical Society · doi:10.5012/bkcs.2010.31.8.2141 · Cited by 5
Liu, J., Zheng, P., Feng, M., & Liu, X. (2016) · Ionics · doi:10.1007/s11581-016-1820-0 · Cited by 5
Peach, R., Krieg, H. M., Krüger, A. J., Bessarabov, D., & Kerres, J. A. (2018) · Materials Today Proceedings · doi:10.1016/j.matpr.2017.12.384 · Cited by 5
Self-citationPredicting the Effects of Carbon Dioxide on the Conductivity of Electrospun Anion Exchange Membranes
Wrubel, J. A., Peracchio, A. A., Cassenti, B. N., Omasta, T. J., Mustain, W. E., Grew, K. N., & Chiu, W. K. S. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0481914jes · Cited by 5
Xue, Y., Fu, R., & Xu, T. (2010) · Acta Polymerica Sinica · doi:10.3724/sp.j.1105.2010.00285 · Cited by 5
Sulfonated dendrimer‐ and hyperbranched polyglycerol‐ PBIOO ® blend membranes for fuel cells
Martín‐Zarco, M., Titvinidze, G., García-Martínez, J. C., & Rodríguez‐López, J. (2015) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.27777 · Cited by 5
Materials for Proton Exchange Membrane Fuel Cells
Pollard, R., Qi, Z., Guo, Q., Mao, L., Elter, J. F., & Du, B. (2007) · CRC Press eBooks · doi:10.1201/9781420006070.ch12 · Cited by 5
Pasquini, L., Sauvan, M., Narducci, R., Sgreccia, E., Knauth, P., & Vona, M. L. D. (2022) · Membranes · doi:10.3390/membranes12111159 · Cited by 4
Synthesis and Characterization of Novel Perfluoro Aromatic Side Chain Sulfonated PSU Ionomers
Martschin, P., Atanasov, V. M., Thiele, S., & Kerres, J. A. (2024) · ACS Polymers Au · doi:10.1021/acspolymersau.4c00059 · Cited by 4
Self-citationThanganathan, U. (2016) · Journal of Membrane Science · doi:10.1016/j.memsci.2016.05.030 · Cited by 4
Peach, R., Krieg, H. M., Krüger, A. J., Bessarabov, D., & Kerres, J. A. (2019) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2019.11.132 · Cited by 4
Self-citation
Metadata
- Authors
- Kerres, J. A.
- Corresponding author
- Kerres, J. A.
- ORCID
- Kerres, J. A.
- Venue
- Fuel Cells
- Publisher
- Wiley
- Published
- 2005-04
- Volume
- 5
- Issue
- 2
- Pages
- 230-247
- ISSN
- 1615-6846 (ISSN-L)
- 1615-6854
- OpenAlex
- W2048834239
- Semantic Scholar
- 25e486fc23d2942849bec9e54d5c8d95b269f4f9
- Cited by
- 341
- References
- 61
- Citations by year
- 2026: 5 · 2025: 5 · 2024: 4 · 2023: 5 · 2022: 7 · 2021: 10 · 2020: 10 · 2019: 7 · 2018: 17 · 2017: 8 · 2016: 18 · 2015: 15 · 2014: 20 · 2013: 24 · 2012: 29
- FWCI
- 21.85
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Fuel Cells (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Chemical Engineering › Filtration and Separation › Membrane Separation and Gas Transport
- Physical Sciences › Chemical Engineering › Filtration and Separation › Membrane-based Ion Separation Techniques
- Keywords
- ionomer membranes, proton exchange membrane fuel cells, direct methanol fuel cells, covalent cross-linking, S-alkylation, zirconium phosphate, organic-inorganic hybrid membranes
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.