Blended and cross-linked ionomer membranes for application in membrane fuel cells
The DOI matches its Crossref record; 61 of the 61 references it cites were found in a registry or an index.
Abstract
Differently cross‐linked blend membranes were prepared from commercial arylene main‐chain polymers of the poly(etherketone) and poly(ethersulfone) classes, modified with sulfonate groups, sulfinate cross‐linking groups, and basic N‐groups. The following membrane types have been prepared: (i) Van‐der Waals/dipole‐dipole blends by mixing a polysulfonate with unmodified PSU. This membrane type showed a heterogeneous morphology, leading to extreme swelling and even dissolution of the sulfonated component at elevated temperatures. (ii) Hydrogen bridge blends by mixing a polysulfonate with a polyamide or a polyetherimide. This membrane type showed a partially heterogeneous morphology, also leading to extreme swelling/dissolution of the sulfonated blend component at elevated temperatures. (iii) Acid‐base blends by mixing a polysulfonate with a polymeric N‐base (in‐house developed/commercial). A wide range of properties could be achieved with this membrane type by variation of the different parameters. Membranes showing excellent stability and good fuel cell performance up to 100 °C (PEFC) and 130 °C (DMFC) were obtained. (iv) Covalently cross‐linked (blend) membranes by either mixing a polysulfonate with a polysulfinate or by preparing a polysulfinatesulfonate, followed by reaction of the sulfinate groups in solution with a dihalogeno compound under S‐alkylation. The membranes prepared showed effective suppression of swelling without a loss in the H+‐conductivity. The membranes showed good PEFC (up to 100 °C) and DMFC (up to 130 °C) performance. (v) Covalent‐ionically cross‐linked blend membranes by mixing polysulfonates with polysulfinates and polybases or by mixing a polysulfonate with a polymer carrying both sulfinate and basic N‐groups. The covalent‐ionically cross‐linked membranes were tested in a DMFC up to 110 °C and demonstrated good performance. (vi) Differently cross‐linked organic‐inorganic blend composite membranes via various procedures. The best results were obtained with blend membranes having a layered zirconium phosphate “ZrP” phase: they were transparent, and showed good H+‐conductivity and stability. The application of one of these composite membranes in a PEFC yielded good performance up to T = 115 °C.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Compared to some blend membrane systems based on acid-base interactions that have been investigated in the literature [18,19,31,32], the SPEEK/PSf-BTraz blend membranes presented here show higher proton conductivity than plain SPEEK membrane despite a decrease in the IEC values due to acid-base interactions.”
From Acid–base blend membranes consisting of sulfonated poly(ether ether ketone) and 5-amino-benzotriazole tethered polysulfone for DMFC (2010) · cites this paper as [19]
Citations
Cites
On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells
Kreuer, K. D. (2001) · Journal of Membrane Science · doi:10.1016/s0376-7388(00)00632-3 · Cited by 2,969
Proton Conductivity: Materials and Applications
Kreuer, K.-D. (1996) · Chemistry of Materials · doi:10.1021/cm950192a · Cited by 2,529
Acid‐Doped Polybenzimidazoles: A New Polymer Electrolyte
Wainright, J. S., Wang, J. ‐., Weng, D., Savinell, R. F., & Litt, M. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2044337 · Cited by 1,251
Development of ionomer membranes for fuel cells
Kerres, J. A. (2001) · Journal of Membrane Science · doi:10.1016/s0376-7388(00)00631-1 · Cited by 1,022
Self-citationSynthesis and characterization of sulfonated poly(ether ether ketone) for proton exchange membranes
Xing, P., Robertson, G. P., Guiver, M. D., Mikhailenko, S. D., Wang, K., & Kaliaguine, S. (2004) · Journal of Membrane Science · doi:10.1016/j.memsci.2003.09.019 · Cited by 1,007
Zaidi, S. M. J., Mikhailenko, S. D., Robertson, G. P., Guiver, M. D., & Kaliaguine, S. (2000) · Journal of Membrane Science · doi:10.1016/s0376-7388(00)00345-8 · Cited by 897
Non-Fluorinated Polymer Materials for Proton Exchange Membrane Fuel Cells
Rozière, J., & Jones, D. J. (2003) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.33.022702.154657 · Cited by 786
Conductivity of PBI Membranes for High-Temperature Polymer Electrolyte Fuel Cells
Ma, Y.-L., Wainright, J. S., Litt, M. H., & Savinell, R. F. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1630037 · Cited by 716
Jones, D. J., & Rozière, J. (2001) · Journal of Membrane Science · doi:10.1016/s0376-7388(00)00633-5 · Cited by 568
Composite Membranes for Medium-Temperature PEM Fuel Cells
Alberti, G., & Casciola, M. (2003) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.33.022702.154702 · Cited by 522
Millipore pays US$3.5 M in patent dispute
(1998) · Membrane Technology · doi:10.1016/s0958-2118(98)90297-x · Cited by 514
Physical properties and supermolecular structure of perfluorinated ion-containing (nafion) polymers
Yeo, S. C., & Eisenberg, A. (1977) · Journal of Applied Polymer Science · doi:10.1002/app.1977.070210401 · Cited by 486
Adjemian, K. T., Lee, S. J., Srinivasan, S., Benziger, J., & Bocarsly, A. B. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1445431 · Cited by 478
Kerres, J., Ullrich, A., Meier, F., & Häring, T. (1999) · Solid State Ionics · doi:10.1016/s0167-2738(99)00181-2 · Cited by 454
Self-citationNolte, R., Ledjeff, K., Bauer, M., & Mülhaupt, R. (1993) · Journal of Membrane Science · doi:10.1016/0376-7388(93)85268-2 · Cited by 409
Ren, X., Springer, T. E., & Gottesfeld, S. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393161 · Cited by 401
Noshay, A., & Robeson, L. M. (1976) · Journal of Applied Polymer Science · doi:10.1002/app.1976.070200717 · Cited by 389
Proton conducting membranes based on cross-linked sulfonated poly(ether ether ketone) (SPEEK)
Mikhailenko, S. D., Wang, K., Kaliaguine, S., Xing, P., Robertson, G. P., & Guiver, M. D. (2004) · Journal of Membrane Science · doi:10.1016/j.memsci.2004.01.004 · Cited by 373
Sulfonated and crosslinked polyphosphazene-based proton-exchange membranes
Guo, Q., N. Pintauro, P., Tang, H., & O'Connor, S. (1999) · Journal of Membrane Science · doi:10.1016/s0376-7388(98)00282-8 · Cited by 355
Kim, Y. S., Wang, F., Hickner, M., Zawodzinski, T. A., & McGrath, J. E. (2003) · Journal of Membrane Science · doi:10.1016/s0376-7388(02)00507-0 · Cited by 348
Yang, C., Srinivasan, S., Aricò, A. S., Cretı̀, P., Baglio, V., & Antonucci, V. (2001) · Electrochemical and Solid-State Letters · doi:10.1149/1.1353157 · Cited by 284
New membranes for direct methanol fuel cells
Jörissen, L., Gogel, V., Kerres, J., & Garche, J. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00952-1 · Cited by 279
Self-citationProperties of SPEEK based PEMs for fuel cell application
Kaliaguine, S., Mikhailenko, S. D., Wang, K. P., Xing, P., Robertson, G., & Guiver, M. (2003) · Catalysis Today · doi:10.1016/s0920-5861(03)00235-9 · Cited by 269
Chiral Quest receives US patent for DIOP* ligand family
(2003) · Focus on Catalysts · doi:10.1016/s1351-4180(03)00931-0 · Cited by 247
Mauritz, K. A. (1998) · Materials Science and Engineering: C · doi:10.1016/s0928-4931(98)00042-3 · Cited by 221
Synthesis and characterization of sulfonated poly(acrylene ether sulfones)
Johnson, B. C., Yilgör, İ., Tran, C., Iqbal, M., Wightman, J. P., Lloyd, D. R., & McGrath, J. E. (1984) · Journal of Polymer Science: Polymer Chemistry Edition · doi:10.1002/pol.1984.170220320 · Cited by 206
Kerres, J., Cui, W., & Reichle, S. (1996) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/(sici)1099-0518(19960915)34:12<2421::aid-pola17>3.0.co;2-a · Cited by 205
Self-citationAdjemian, K. T., Srinivasan, S., Benziger, J., & Bocarsly, A. B. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00086-1 · Cited by 199
Development and characterization of ion-exchange polymer blend membranes
Cui, W., Kerres, J., & Eigenberger, G. (1998) · Separation and Purification Technology · doi:10.1016/s1383-5866(98)00069-0 · Cited by 174
Self-citationAllcock, H. (2002) · Journal of Membrane Science · doi:10.1016/s0376-7388(01)00702-5 · Cited by 168
Hasiotis, C., Qingfeng, L., Deimede, V., Kallitsis, J. K., Kontoyannis, C. G., & Bjerrum, N. J. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1366621 · Cited by 154
In-situ spin trap electron paramagnetic resonance study of fuel cell processes
Panchenko, A., Dilger, H., Kerres, J., Hein, M., Ullrich, A., Kaz, T., & Roduner, E. (2004) · Physical Chemistry Chemical Physics · doi:10.1039/b404253k · Cited by 146
Self-citationMiyatake, K., Iyotani, H., Yamamoto, K., & Tsuchida, E. (1996) · Macromolecules · doi:10.1021/ma960768x · Cited by 144
Reduction of methanol permeability in polyetherketone–heteropolyacid membranes
Ponce, M. L., Prado, L., Ruffmann, B., Richau, K., Mohr, R., & Nunes, S. P. (2003) · Journal of Membrane Science · doi:10.1016/s0376-7388(02)00309-5 · Cited by 122
Organic—inorganic protonic polymer electrolytes as membrane for low-temperature fuel cell
Gautier‐Luneau, I., Denoyelle, A., Sanchez, J., & Poinsignon, C. (1992) · Electrochimica Acta · doi:10.1016/0013-4686(92)80122-3 · Cited by 100
Kerres, J., Zhang, W., & Cui, W. (1998) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/(sici)1099-0518(19980715)36:9<1441::aid-pola12>3.0.co;2-4 · Cited by 99
Kosmala, B., & Schauer, J. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10632 · Cited by 95
Guiver, M. D., Robertson, G. P., & Foley, S. (1995) · Macromolecules · doi:10.1021/ma00127a005 · Cited by 86
Cross‐Linked Polyaryl Blend Membranes for Polymer Electrolyte Fuel Cells
Kerres, J. A., Ullrich, A., Hein, M., Gogel, V., Friedrich, K. A., & Jörissen, L. (2004) · Fuel Cells · doi:10.1002/fuce.200400013 · Cited by 81
Self-citationMembrane Durability in a PEM Fuel Cell Studied Using PVDF Based Radiation Grafted Membranes
Gode, P., Ihonen, J. K., Strandroth, A., Ericson, H., Lindbergh, G., Paronen, M., Sundholm, F., Sundholm, G., & Walsby, N. (2003) · Fuel Cells · doi:10.1002/fuce.200320239 · Cited by 78
Hybrid Polyaryletherketone Membranes for Fuel Cell Applications
Tchicaya-Bouckary, L., Jones, D. J., & Rozière, J. (2002) · Fuel Cells · doi:10.1002/1615-6854(20020815)2:1<40::aid-fuce40>3.0.co;2-u · Cited by 75
Performance of a Polymer Electrolyte Membrane Fuel Cell Exposed to Transient CO Concentrations
Mahesh Murthy, A., Esayian, M., Hobson, A., MacKenzie, S., Lee, W.-K., & Zee, J. W. V. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1402119 · Cited by 74
Sulfonated poly(aryl ether ketone)s
Ulrich, H.-H., & Rafler, G. (1998) · Die Angewandte Makromolekulare Chemie · doi:10.1002/(sici)1522-9505(19981215)263:1<71::aid-apmc71>3.0.co;2-n · Cited by 71
Drug-release behavior of chitosan-g-poly(vinyl alcohol) copolymer matrix
Kweon, D. K., & Kang, D. W. (1999) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19991010)74:2<428::aid-app26>3.0.co;2-o · Cited by 69
Anodic Oxidation of Polyhydric Alcohols on a Pt Electrode in Alkaline Solution
Matsuoka, K., Inaba, M., Iriyama, Y., Abe, T., Ogumi, Z., & Matsuoka, M. (2002) · Fuel Cells · doi:10.1002/1615-6854(20020815)2:1<31::aid-fuce31>3.0.co;2-q · Cited by 69
Properties and Applications of Celanese PBI—Polybenzimidazole Fiber
Coffin, D. R., Serad, G. A., Hicks, H. L., & Montgomery, R. T. (1982) · Textile Research Journal · doi:10.1177/004051758205200706 · Cited by 64
Transport of methanol and water through Nafion membranes
Barragán, V. M., Ruíz-Bauzá, C., Villaluenga, J. P. G., & Seoane, B. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.12.007 · Cited by 62
Guiver, M. D., & Robertson, G. P. (1995) · Macromolecules · doi:10.1021/ma00105a041 · Cited by 60
Kerres, J. A., Zhang, W., Ullrich, A., Tang, C.-M., Hein, M., Gogel, V., Frey, T., & Jörissen, L. (2002) · Desalination · doi:10.1016/s0011-9164(02)00530-1 · Cited by 53
Self-citationManea, C., & Mulder, M. H. V. (2002) · Desalination · doi:10.1016/s0011-9164(02)00531-3 · Cited by 51
Preparation and characterization of novel basic polysulfone polymers
Kerres, J. A., Ullrich, A., & Hein, M. (2001) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.1267 · Cited by 49
Self-citationKerres, J. A. (2001) · Separation and Purification Technology · doi:10.1016/s1383-5866(00)00146-5 · Cited by 47
Self-citationHonma, I., Nakajima, H., Nishikawa, O., Sugimoto, T., & Nomura, S. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1507783 · Cited by 44
Naik, H. A., Parsons, I. W., McGrail, P. T., & MacKenzie, P. D. (1991) · Polymer · doi:10.1016/0032-3861(91)90574-3 · Cited by 31
Brack, H., Rüegg, D., Bührer, H., Slaski, M., Gürsel, S. A., & Scherer, G. G. (2004) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.20137 · Cited by 31
Bouzek, K., Moravcová, S., Samec, Z., & Schauer, J. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1572484 · Cited by 28
Zhang, W. (2001) · Separation and Purification Technology · doi:10.1016/s1383-5866(00)00131-3 · Cited by 27
Causal ordering and ‘The bank lending channel’
Perez, S. J. (1998) · Journal of Applied Econometrics · doi:10.1002/(sici)1099-1255(199811/12)13:6<613::aid-jae492>3.0.co;2-7 · Cited by 25
Polybenzimidazole (PBI) and polyarylate blends
Chung, T., & Chen, P. N. (1990) · Journal of Applied Polymer Science · doi:10.1002/app.1990.070400711 · Cited by 22
Schauer, J., Lopour, P., & Vacik, J. (1986) · Journal of Membrane Science · doi:10.1016/s0376-7388(00)82467-9 · Cited by 20
Proton-conducting polymers with reduced methanol permeation
Walker, M., Baumg�rtner, K.-M., Kaiser, M., Kerres, J., Ullrich, A., & R�uchle, E. (1999) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19991003)74:1<67::aid-app7>3.0.co;2-2
Self-citation
Research works printed but not linked: 18
- C. Stone L. Q. Hu T. Daynard C. Mah lecture 3rdInternational Symposium on New Materials for Electrochemical Systems Montreal Canada 1999.
- A. E. Steck C. Stone inProceedings of the Second International Symposium on New Materials for Fuel Cell and Modern Battery Systems (Eds. O. Savadogo P. R. Roberge) Montreal Canada 1997 p. 792.
- Percec S., 1986, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 19
- M. Schuster Ph.D. Thesis University of Mainz 2002 can be found underhttp://archimed.uni‐mainz.de/pub/2002/0017/diss.pdf.
- Aricò A. S., 1998, Electrochem. Solid‐State Lett., 66
- Kerres J., 2000, J. New Mater. Electrochem. Syst., 3, 229
- S. Motupally V. Lightner Hydrogen Fuel Cells and Infrastructure Technologies Program FY 2003 Progress Report U. S. Department of Energy Energy Efficiency and Renewable Energy 2003 pp. 7.
- D. J. Jones M. El Haddad B. Mula J. Rozière Environmental Research Forum “Chemistry and Energy” 1‐2(Ed. C. A. C. Sequeira) Transtec 1996 pp. 115.
- J. Rozière D. J. Jones Handbook of Fuel Cell Technology Vol. 3(Ed. W. Vielstich A. Lamm H. Gasteiger) John Wiley and Sons 2003 pp. 447.
- Bauer B., 2000, J. New Mater. Electrochem. Appl., 3, 87
- J. Kerres C.‐M. Tang C. Graf Ind. Eng. Chem. Res. in press can be found underhttp://pubs.acs.org/cgi‐bin/asap.cgi/iecred/asap/pdf/ie030762d.pdf.
- M. D. Guiver Ph.D. Thesis Carletown University Ottawa‐Ontario Canada 1987.
- Kerres J., 2003, J. New Mat. Electrochem. Syst., 223
- Kerres J., 2002, J. New Mat. Electrochem. Syst., 5, 97
- J. Kerres M. Hein W. Zhang N. Nicoloso S. Graf Invited lecture(J. Kerres) Fifth International Symposium “New Materials for Electrochemical Systems” Montreal Canada 2003. J. Kerres W. Zhang T. Häring J. New Mat. Electrochem. Syst. accepted.
- J. Kerres Invited lecture 204thMeeting of The Electrochemical Society proceedings submitted Orlando Florida 2003.
- J. Kerres Invited lecture Symposium “Advances in Materials for Proton Exchange Membrane Fuel Cell Systems” Asilomar California 2003.
- Meier F., 2002, J. New Mat. Electrochem. Syst., 5, 91
Cited by
Scientific Aspects of Polymer Electrolyte Fuel Cell Durability and Degradation
Borup, R., Meyers, J., Pivovar, B., Kim, Y. S., Mukundan, R., Garland, N., Myers, D., Wilson, M., Garzon, F., Wood, D., et al. (2007) · Chemical Reviews · doi:10.1021/cr050182l · Cited by 3,402
Towards flexible solid-state supercapacitors for smart and wearable electronics
Dubal, D. P., Chodankar, N. R., Kim, D.-H., & Gomez-Romero, P. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00505a · Cited by 1,725
Recent Development of Polymer Electrolyte Membranes for Fuel Cells
Zhang, H., & Shen, P. K. (2012) · Chemical Reviews · doi:10.1021/cr200035s · Cited by 1,361
High temperature proton exchange membranes based on polybenzimidazoles for fuel cells
Li, Q., Jensen, J. O., Savinell, R. F., & Bjerrum, N. J. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.12.003 · Cited by 1,323
Ion exchange membranes for vanadium redox flow battery (VRB) applications
Li, X., Zhang, H., Mai, Z., Zhang, H., & Vankelecom, I. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00770f · Cited by 997
Metadata
- Authors
- Kerres, J. A.
- Corresponding author
- Kerres, J. A.
- ORCID
- Kerres, J. A.
- Venue
- Fuel Cells
- Publisher
- Wiley
- Published
- 2005-04
- Volume
- 5
- Issue
- 2
- Pages
- 230-247
- ISSN
- 1615-6846 (ISSN-L)
- 1615-6854
- OpenAlex
- W2048834239
- Semantic Scholar
- 25e486fc23d2942849bec9e54d5c8d95b269f4f9
- Cited by
- 341
- References
- 61
- Citations by year
- 2026: 5 · 2025: 5 · 2024: 4 · 2023: 5 · 2022: 7 · 2021: 10 · 2020: 10 · 2019: 7 · 2018: 17 · 2017: 8 · 2016: 18 · 2015: 15 · 2014: 20 · 2013: 24 · 2012: 29
- FWCI
- 21.85
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Fuel Cells (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Chemical Engineering › Filtration and Separation › Membrane Separation and Gas Transport
- Physical Sciences › Chemical Engineering › Filtration and Separation › Membrane-based Ion Separation Techniques
- Keywords
- ionomer membranes, proton exchange membrane fuel cells, direct methanol fuel cells, covalent cross-linking, S-alkylation, zirconium phosphate, organic-inorganic hybrid membranes
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.