Enhanced Performance of Ionomer Binder with Shorter Side-Chains, Higher Dispersibility, and Lower Equivalent Weight
The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Abstract
Interaction between the ionomer binder and catalyst nanoparticles in catalyst ink is well known to play an important role in the performance of proton exchange membrane fuel cells (PEMFCs) because it determines the final micro‐morphology of the catalyst layer. Herein, we investigated the 3M series of perfluorinated sulfonic acid (PFSA) ionomer binders, which have higher polymeric main‐chain mobilities, increased solubilities, shorter side‐chains, and lower equivalent weights than the Nafion 1100 series of ionomers. The molecular mobility was determined by 19 F nuclear magnetic resonance (NMR), and the differences in the structure of the catalyst layer surfaces were identified using field‐emission scanning electron microscopy (FE‐SEM) and Hg intrusion porosimetry (MIP). The 3M binder with high dispersibility exhibits more developed and connected secondary pore catalyst layer structures and fewer clustered agglomerates; thus, it shows higher performance in a single cell, particularly under conditions of low relative humidity (RH). A comparative study of the electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) results of the 3M and Nafion series of ionomer binders is also included. These insights help us elucidate the reason for the difference in performance by different ionomers and provide the foundation for improving the fuel cell performance of Nafion‐type ionomers.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In brief, the CLs containing SSC ionomer usually show improved and con-nected secondary pores, uniform and continuous ionomer coverage on the catalyst, and enhanced ionomer distribution, leading to higher Pt utilization efficiency and improved mass transport [106,107,113,114].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [113]
In the citing paper
“When the other conditions are fixed, the optimal I/C ratio for the 3M PFSA ionomer (EW 725, 25 wt.% in CL) is lower than that of Nafion ionomer (EW 1100, 30 wt.% in CL) due to the more uniform distribution in the CL and higher proton conductivity [113].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [113]
Citations
Cites
Electrocatalyst approaches and challenges for automotive fuel cells
Debe, M. K. (2012) · Nature · doi:10.1038/nature11115 · Cited by 5,885
O'Hayre, R., Cha, S., Colella, W., & Prinz, F. B. (2016) · Wiley eBooks · doi:10.1002/9781119191766 · Cited by 3,012
New Insights into Perfluorinated Sulfonic-Acid Ionomers
Kusoglu, A., & Weber, A. Z. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00159 · Cited by 2,432
Review and analysis of PEM fuel cell design and manufacturing
Mehta, V., & Cooper, J. S. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00542-6 · Cited by 1,685
Fuel Cell Catalyst Layers: A Polymer Science Perspective
Holdcroft, S. (2014) · Chemistry of Materials · doi:10.1021/cm401445h · Cited by 481
Soboleva, T., Zhao, X., Malek, K., Xie, Z., Navessin, T., & Holdcroft, S. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am900600y · Cited by 424
Uchida, M., Aoyama, Y., Eda, N., & Ohta, A. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2048477 · Cited by 408
Studies on pore systems in catalysts VI. The universal t curve
DEBOER, J. (1965) · Journal of Catalysis · doi:10.1016/0021-9517(65)90263-0 · Cited by 334
Water Management in Cathode Catalyst Layers of PEM Fuel Cells
Eikerling, M. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2160435 · Cited by 295
Liu, Y., Murphy, M. W., Baker, D. R., Gu, W., Ji, C., Jorne, J., & Gasteiger, H. A. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3143965 · Cited by 290
Cited by
Ahn, C.-Y., Park, J. E., Kim, S., Kim, O.-H., Hwang, W., Her, M., Kang, S. Y., Park, S., Kwon, O. J., Park, H. S., et al. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01337 · Cited by 239
Self-citationThe Controllable Design of Catalyst Inks to Enhance PEMFC Performance: A Review
Guo, Y., Pan, F., Chen, W., Ding, Z., Yang, D., Li, B., Ming, P., & Zhang, C. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00083-2 · Cited by 175
“Here, EW can be determined by side chain length (size) and backbone length (m) and PFSAs with short side chains (SSCs) and low EWs have received considerable attention in functional optimizations due to higher crystallinity and thermal transition temperatures as compared with PFSAs with long side chains (LSCs) [113].”
BackgroundInfluentialYan, X., Xu, Z., Yuan, S., Han, A., Shen, Y., Cheng, X., Liang, Y., Shen, S., & Zhang, J. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.231523 · Cited by 131
Liu, H., Ney, L., Zamel, N., & Li, X. (2022) · Applied Sciences · doi:10.3390/app12083776 · Cited by 85
Guan, P., Lei, J., Liu, X., Xu, K., Pei, S., Ding, H., Zou, Y., Feng, W. M., Liu, F., & Zhang, Y. (2022) · Chemistry of Materials · doi:10.1021/acs.chemmater.2c01445 · Cited by 56
Ren, H., Meng, X., Lin, Y., & Shao, Z. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230698 · Cited by 53
Liu, P., Yang, D., Li, B., Zhang, C., & Ming, P. (2023) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2023.02.022 · Cited by 49
A highly stable reinforced PEM assisted by resveratrol and polydopamine-treated PTFE
Huo, Y., Li, Q., Rui, Z., Ding, R. F., Liu, J., Li, J., & Liu, J. (2021) · Journal of Membrane Science · doi:10.1016/j.memsci.2021.119453 · Cited by 45
Choi, H. J., Choi, H. J., Kim, J., Choi, H., Chu, C., La, I., Ahn, C., Shim, H., Kim, O.-H., & Cho, Y. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.03.235 · Cited by 44
Self-citationHegde, S., Wörner, R., & Shabani, B. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.02.402 · Cited by 44
Huang, X., He, Y., Sun, Y., Sun, L., Wang, T., & Zhang, X. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.234488 · Cited by 34
Kassa, T. S., Yessuf, A. M., Mohideen, M. M., Mihiretu, A. M., Ramakrishna, S., & Liu, Y. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c02335 · Cited by 37
Kim, O., Ahn, C., Kang, S. Y., Kim, S., Choi, H. J., Cho, Y. ‐., & Sung, Y. (2019) · Fuel Cells · doi:10.1002/fuce.201900120 · Cited by 21
Self-citationModulating Perfluorinated Ionomer Functionality via Sidechain Chemistry
Bird, A., Lindell, M. J., Kushner, D. I., Haug, A. T., Yandrasits, M., & Kusoglu, A. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202311073 · Cited by 21
Lim, J. H., Hou, J., Kim, W. Y., Wi, S., & Lee, C. H. (2023) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2023.09.131 · Cited by 20
Lee, S., Nam, J., Ahn, J., Yoon, S., Jeong, S. C., Ju, H., & Lee, C. H. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.11.319 · Cited by 16
Kim, O., Choi, H. J., Kang, S. Y., Jang, G. Y., Karuppannan, M., Park, J. E., Sung, Y., Kwon, O. J., & Cho, Y. (2022) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2022.116661 · Cited by 14
Self-citationKim, J., Choi, H. J., Choi, H., Kang, S. Y., Choi, H., Ahn, C., Kim, Y.-H., La, I., Kim, O., Cho, Y., et al. (2024) · Energy Technology · doi:10.1002/ente.202400445 · Cited by 9
Self-citationVijayaraghavan, S. B., Baldofski, M., & Franco, A. A. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.238238 · Cited by 6
Acheampong, R., Stewart-Thomas, K., Islam, M. N., Dhawan, H., Eastcott, J. I., & Shahgaldi, S. (2025) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2025.138741 · Cited by 6
Zhao, X., Gao, S., Wang, S., Hou, T., Bao, Z., Guo, W. F., Deng, C., Kong, F., & Yin, G. (2025) · ACS Catalysis · doi:10.1021/acscatal.5c03319 · Cited by 5
Su, Y., Yuan, S., Li, J., Feng, Y., Shen, S., Yan, X., & Zhang, J. (2026) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2025.116163 · Cited by 6
Wei, J., Wang, Y., Ke, C., Liu, Y., Yang, S., Pan, M., & Li, G. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.05.134 · Cited by 3
Self-citationSafronova, E. Y., Stretton, N., Korchagin, O. V., Голубенко, Д. В., Hilal, N., & Yaroslavtsev, A. B. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.06.144 · Cited by 3
Component Optimization for Catalyst Layers in Proton Exchange Membrane Fuel Cells
Peng, J., Peng, J., Zhang, W., Zhang, X., Tao, P., Song, C., Shang, W., Deng, T., Zhang, W., Zhang, X., et al. (2020) · General Chemistry · doi:10.21127/yaoyigc2020200016 · Cited by 3
“[27,29] Besides, some researches have revealed that MEA prepared with SSC ionomers possess higher durability than those prepared with LSC ionomers.”
BackgroundResultInfluentialEffects of Catalyst Ink Storage on Polymer Electrolyte Fuel Cells
Kircher, M., Roschger, M., Koo, W. Y., Blaschke, F., Grandi, M., Bodner, M., & Hacker, V. (2023) · Energies · doi:10.3390/en16197011 · Cited by 6
Balogun, E., Rajasekar, S., Thomas, S., Biancolli, A. L. G., Saatkamp, T., Egemole, F. O., Cassegrain, S., & Holdcroft, S. (2025) · Advanced Energy and Sustainability Research · doi:10.1002/aesr.202400260 · Cited by 2
Regulating membrane ion clusters to alleviate ammonia crossover in thermally regenerative batteries
Li, S., Tang, Y., An, Y., Zhang, L., Li, J., Zhu, X., & Liao, Q. (2025) · Applied Physics Letters · doi:10.1063/5.0289268 · Cited by 2
Murugaiah, D. K., Islam, M. N., Stewart-Thomas, K., Eastcott, J. I., Dhawan, H., & Shahgaldi, S. (2026) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2026.140463
Metadata
- Authors
- Kim, O. ‐., Oh, S. ‐., Ahn, C. ‐., Kim, S., Kim, J. K., Kim, J., Yang, S., Choi, M., Cho, Y. ‐., & Sung, Y. ‐.
- Affiliations
- Korea Naval Academy (KR)
- Kangwon National University Department of Chemical Engineering 25913 Samcheok South Korea
- Seoul National University (KR)
- Korea Electric Power Corporation (KEPCO) Research Institute Creative Future Laboratory 34056 Daejeon South Korea
- Korea Electric Power Corporation (South Korea) (KR)
- Kangwon National University (KR)
- Corresponding author
- Cho, Y.‐H.
- Sung, Y.‐E.
- Venue
- Fuel Cells
- Publisher
- Wiley
- Published
- 2018-09-28
- Volume
- 18
- Issue
- 6
- Pages
- 711-722
- ISSN
- 1615-6846 (ISSN-L)
- 1615-6854
- OpenAlex
- W2892557727
- Cited by
- 31
- References
- 37
- Citations by year
- 2026: 1 · 2025: 10 · 2024: 6 · 2023: 3 · 2022: 5 · 2021: 3 · 2020: 2 · 2019: 1
- FWCI
- 0.57
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Fuel Cells (publishedVersion)
- Seoul National University Open Repository (Seoul National University) (submittedVersion)
- Funders
- National Research Foundation of Korea
- Daewoo Shipbuilding & Marine Engineering
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
- Keywords
- ionomer binder, proton exchange membrane fuel cells, perfluorinated sulfonic acid ionomers, Nafion, catalyst ink, catalyst layer microstructure, side chain length, equivalent weight, molecular mobility, dispersibility, secondary pores, catalyst agglomerates, low relative humidity, fuel cell performance
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.