CoChat

Enhanced Performance of Ionomer Binder with Shorter Side-Chains, Higher Dispersibility, and Lower Equivalent Weight

Kim, O.‐H., Oh, S.‐H., Ahn, C.‐Y., Kim, S., Kim, J. K., Kim, J., Yang, S., Choi, M., Cho, Y.‐H., Sung, Y.‐E. · 2018 · Fuel Cells

The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.

Abstract

Interaction between the ionomer binder and catalyst nanoparticles in catalyst ink is well known to play an important role in the performance of proton exchange membrane fuel cells (PEMFCs) because it determines the final micro‐morphology of the catalyst layer. Herein, we investigated the 3M series of perfluorinated sulfonic acid (PFSA) ionomer binders, which have higher polymeric main‐chain mobilities, increased solubilities, shorter side‐chains, and lower equivalent weights than the Nafion 1100 series of ionomers. The molecular mobility was determined by 19 F nuclear magnetic resonance (NMR), and the differences in the structure of the catalyst layer surfaces were identified using field‐emission scanning electron microscopy (FE‐SEM) and Hg intrusion porosimetry (MIP). The 3M binder with high dispersibility exhibits more developed and connected secondary pore catalyst layer structures and fewer clustered agglomerates; thus, it shows higher performance in a single cell, particularly under conditions of low relative humidity (RH). A comparative study of the electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) results of the 3M and Nafion series of ionomer binders is also included. These insights help us elucidate the reason for the difference in performance by different ionomers and provide the foundation for improving the fuel cell performance of Nafion‐type ionomers.

Overview

Integrity signals

Registry

Crossref · 10.1002/fuce.201800083

Cites

37 of 37 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 37 references

Cited by

See all 31

Metadata

Authors
Kim, O. ‐., Oh, S. ‐., Ahn, C. ‐., Kim, S., Kim, J. K., Kim, J., Yang, S., Choi, M., Cho, Y. ‐., & Sung, Y. ‐.
Affiliations
  • Korea Naval Academy (KR)
  • Kangwon National University Department of Chemical Engineering 25913 Samcheok South Korea
  • Seoul National University (KR)
  • Korea Electric Power Corporation (KEPCO) Research Institute Creative Future Laboratory 34056 Daejeon South Korea
  • Korea Electric Power Corporation (South Korea) (KR)
  • Kangwon National University (KR)
Corresponding author
  • Cho, Y.‐H.
  • Sung, Y.‐E.
Venue
Fuel Cells
Publisher
Wiley
Published
2018-09-28
Volume
18
Issue
6
Pages
711-722
ISSN
  • 1615-6846 (ISSN-L)
  • 1615-6854
OpenAlex
W2892557727
Cited by
31
References
37
Citations by year
2026: 1 · 2025: 10 · 2024: 6 · 2023: 3 · 2022: 5 · 2021: 3 · 2020: 2 · 2019: 1
FWCI
0.57
Type
journal article
Language
en
Open access
closed
Locations
  • Fuel Cells (publishedVersion)
  • Seoul National University Open Repository (Seoul National University) (submittedVersion)
Funders
  • National Research Foundation of Korea
  • Daewoo Shipbuilding & Marine Engineering
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
Keywords
ionomer binder, proton exchange membrane fuel cells, perfluorinated sulfonic acid ionomers, Nafion, catalyst ink, catalyst layer microstructure, side chain length, equivalent weight, molecular mobility, dispersibility, secondary pores, catalyst agglomerates, low relative humidity, fuel cell performance

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.