Smoothing of digital elevation models and the alteration of overland flow path length distributions
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
DEM smoothing is a common pre‐processing technique used to remove undesirable roughness from a DEM. However, it is hypothesized that smoothing straightens and reduces the length of overland flow paths, which is an important factor controlling modelled time‐to‐peak flow. Currently, there is a lack of research comparing how different smoothing techniques alter the distribution of overland flow path length. Four low‐pass filtering techniques were applied to three fine‐resolution LiDAR DEMs of varying relief: the mean filter, the median filter, the Gaussian filter, and the feature‐preserving DEM smoothing (FPDEMS) filter, each with different degrees of smoothing. Downslope‐distance‐to‐stream distributions were then derived using D8 and D∞ flow directions and statistically compared to distributions derived from the unsmoothed DEM for each study site. The results indicate that the alteration of flow path length distributions as a result of smoothing is complex. Mean flow path lengths may decrease or increase in response to smoothing, depending on landscape relief and the derivation of flow directions, and generalized flow paths may become longer. The largest increase in mean flow path lengths was 19.2 m using the 21 × 21 median filter and D8 flow directions in the high‐relief study site, relative to an unsmoothed mean length of 138.6 m in this site. The largest decrease in mean flow path length was 48.9 m using the 21 × 21 mean filter and D∞ flow directions in the low‐relief study site, relative to an unsmoothed mean length of 290.9 m in this site. Furthermore, minimal flow path length alterations were achieved with the Gaussian filter when gentle smoothing is required, and with the FPDEMS filter when moderate to aggressive smoothing is required. These results suggest that an appropriate smoothing method should be chosen based on the relief of the landscape and the degree of smoothing required.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Guidance of parameter selection for the filters are limited at the scale of global DEMs [66,67], as studies predominantly focus on finer grid spacing LiDAR data [68][69][70].”
From A 30 m global map of elevation with forests and buildings removed (2022) · cites this paper as [70]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Morphometry and floods in small drainage basins subject to diverse hydrogeomorphic controls
Patton, P. C., & Baker, V. R. (1976) · Water Resources Research · doi:10.1029/wr012i005p00941 · Cited by 401
Research works printed but not linked: 32
- 10.1016/j.isprsjprs.2009.11.001 · DOI
- 10.1016/j.jhydrol.2015.10.069 · doi:10.1016/j.jhydrol.2015.10.069
- 10.1080/02626667909491834 · DOI · Paper page
- 10.1007/s10201-014-0443-2 · doi:10.1007/s10201-014-0443-2
- 10.1007/s11069-010-9592-8 · DOI
- 10.1155/DDNS/2006/63245 · doi:10.1155/ddns/2006/63245
- 10.1016/0098-3004(91)90048-I · DOI · Paper page
- Gallant J. C., 2011, Adaptive smoothing for noisy DEMs, Geomorphometry, 2011, 37
- Garbrecht J. Martz L.W. 1999.Digital elevation model issues in water resources: modeling.Proceedings of the 1999 ESRI Users Conference.http://gis.esri.com/library/userconf/proc99/proceed/papers/pap866/p866.htm
- 10.14358/PERS.81.5.387 · doi:10.14358/pers.81.5.387
- 10.1051/agro:2000114 · DOI · Paper page
- 10.1186/s13717-016-0057-1 · DOI
- 10.1016/j.jhydrol.2015.02.049 · DOI · Paper page
- Köthe R., 2009, Preprocessing of digital elevation models–derived from laser scanning and radar interferometry–for terrain analysis in geosciences, Proceedings of Geomorphometry, 2009, 155
- 10.1002/hyp.5835 · DOI · Paper page
- 10.3390/rs11161926 · DOI · Paper page
- 10.1016/S0022-1694(03)00242-7 · DOI · Paper page
- Lorang M.(2005).Flathead Lake Biological Station MT. [Data file and code book].https://doi.org/10.5069/G97W694V · doi:10.5069/g97w694v
- 10.1007/s11269-021-02948-7 · doi:10.1007/s11269-021-02948-7
- 10.1016/S0734-189X(84)80011-0 · DOI · Paper page
- 10.1029/2019WR024784 · DOI
- 10.3390/ijgi7020051 · doi:10.3390/ijgi7020051
- 10.1016/j.geomorph.2009.07.006 · DOI · Paper page
- 10.1109/TVCG.2007.1065 · doi:10.1109/tvcg.2007.1065
- 10.1029/96WR03137 · DOI · Paper page
- 10.1029/TR033i002p00235 · doi:10.1029/tr033i002p00235
- 10.1016/j.jag.2016.08.012 · DOI
- 10.1061/(ASCE)0887-3801(1993)7:3(310) · doi:10.1061/(asce)0887-3801(1993)7:3(310
- 10.1029/1999WR900034 · DOI · Paper page
- 10.1111/1752-1688.12689 · DOI
- 10.1080/13658816.2020.1772479 · DOI
- 10.1016/j.catena.2016.12.009 · DOI
Cited by
A 30 m global map of elevation with forests and buildings removed
Hawker, L., Uhe, P., Paulo, L., Sosa, J., Savage, J., Sampson, C., & Neal, J. (2022) · Environmental Research Letters · doi:10.1088/1748-9326/ac4d4f · Cited by 907
Metadata
- Authors
- Van Nieuwenhuizen, N., Lindsay, J. B., & DeVries, B.
- Affiliations
- Department of Geography, Environment & Geomatics The University of Guelph Guelph Ontario Canada
- Venue
- Hydrological Processes
- Publisher
- Wiley
- Published
- 2021-07
- Volume
- 35
- Issue
- 7
- ISSN
- 0885-6087
- 1099-1085
- Cited by
- 12
- References
- 1
- Language
- en
- Funders
- Natural Sciences and Engineering Research Council of Canada
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.