The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
LiDAR DEM Smoothing and the Preservation of Drainage Features
Abstract
Fine-resolution Light Detection and Ranging (LiDAR) data often exhibit excessive surface roughness that can hinder the characterization of topographic shape and the modeling of near-surface flow processes. Digital elevation model (DEM) smoothing methods, commonly low-pass filters, are sometimes applied to LiDAR data to subdue the roughness. These techniques can negatively impact the representation of topographic features, most notably drainage features, such as headwater streams. This paper presents the feature-preserving DEM smoothing (FPDEMS) method, which modifies surface normals to smooth the topographic surface in a similar manner to approaches that were originally designed for de-noising three-dimensional (3D) meshes. The FPDEMS method has been optimized for application with raster DEM data. The method was compared with several low-pass filters while using a 0.5-m resolution LiDAR DEM of an agricultural area in southwestern Ontario, Canada. The findings demonstrated that the technique was better at removing roughness, when compared with mean, median, and Gaussian filters, while also preserving sharp breaks-in-slope and retaining the topographic complexity at broader scales. Optimal smoothing occurred with kernel sizes of 11–21 grid cells, threshold angles of 10°–20°, and 3–15 elevation-update iterations. These parameter settings allowed for the effective reduction in roughness and DEM noise and the retention of terrace scarps, channel banks, gullies, and headwater streams.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“whose surficial boundaries themselves depend on DEM scale and accuracy (e.g., Baker, Weller, & Jordan, 2006;Lindsay, Francioni, & Cockburn, 2019)”
From Watersheds and stream networks viewed longitudinally: Example insights from novel spatial portrayals of watershed characteristics (2023) · cites this paper as Lindsay, Francioni, & Cockburn, 2019
In the citing paper
“Guidance of parameter selection for the filters are limited at the scale of global DEMs [66,67], as studies predominantly focus on finer grid spacing LiDAR data [68][69][70].”
From A 30 m global map of elevation with forests and buildings removed (2022) · cites this paper as [69]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bilateral Filtering for Gray and Color Images
Tomasi, C., & Manduchi, R. (2002) · Sixth International Conference on Computer Vision (IEEE Cat. No.98CH36271) · doi:10.1109/iccv.1998.710815 · Cited by 8,177 · cited 1×
“Although this family of filters has mainly been developed for application with digital imagery [26,27] and to de-noise three-dimensional (3D) mesh models [28–32], they have been applied previously to the smoothing of DEM data [13].”
Method
Research works printed but not linked: 38
- Baltsavias, 1999, A comparison between photogrammetry and laser scanning, Isprs J. Photogramm. Remote Sens., 54, 83, 10.1016/S0924-2716(99)00014-3 · DOI · Paper page
- Hodgson, 2004, Accuracy of airborne lidar-derived elevation, Photogramm. Eng. Remote Sens., 70, 331, 10.14358/PERS.70.3.331 · DOI · Paper page
- Yang, 2014, What is the effect of LiDAR-derived DEM resolution on large-scale watershed model results?, Environ. Model. Softw., 58, 48, 10.1016/j.envsoft.2014.04.005 · DOI
- Brubaker, 2013, The use of LiDAR terrain data in characterizing surface roughness and microtopography, Appl. Environ. Soil Sci., 2013, 1, 10.1155/2013/891534 · DOI · Paper page
- MacMillan, 2003, Automated analysis and classification of landforms using high-resolution digital elevation data: applications and issues, Can. J. Remote Sens., 29, 592, 10.5589/m03-031 · doi:10.5589/m03-031
- Lindsay, 2005, Sensitivity of digital landscapes to artifact depressions in remotely-sensed DEMs, Photogramm. Eng. Remote Sens., 71, 1029, 10.14358/PERS.71.9.1029 · DOI
- Grohmann, 2010, Multiscale analysis of topographic surface roughness in the Midland Valley, Scotland, IEEE Trans. Geosci. Remote Sens., 49, 1200, 10.1109/TGRS.2010.2053546 · DOI · Paper page
- Lindsay, 2018, Hyper-scale analysis of surface roughness, Peer J Prepr., 6, e27110v1
- Reuter, 2009, Chapter 4 Preparation of DEMs for geomorphometric analysis, Dev. Soil Sci., 33, 87
- Habtezion, 2016, How does DEM resolution affect microtopographic characteristics, hydrologic connectivity, and modelling of hydrologic processes?, Hydrol. Process., 30, 4870, 10.1002/hyp.10967 · doi:10.1002/hyp.10967
- Deng, 2007, DEM resolution dependencies of terrain attributes across a landscape, Int. J. Geogr. Inf. Sci., 21, 187, 10.1080/13658810600894364 · DOI
- Tian, 2011, Spatial statistics of surface roughness change derived from multi-scale digital elevation models, Procedia Environ. Sci., 7, 252, 10.1016/j.proenv.2011.07.044 · doi:10.1016/j.proenv.2011.07.044
- Stevenson, 2010, Despeckling SRTM and other topographic data with a denoising algorithm, Geomorphology, 114, 238, 10.1016/j.geomorph.2009.07.006 · DOI · Paper page
- Zakšek, K., and Podobnikar, T. (2005, January 7–8). An effective DEM generalization with basic GIS operations. Proceedings of the 8th ICA WORKSHOP on Generalisation and Multiple Representation, A Coruńa, Spain.
- Lindsay, 2016, Whitebox GAT: A case study in geomorphometric analysis, Comput. Geosci., 95, 75, 10.1016/j.cageo.2016.07.003 · DOI · Paper page
- Grohmann, 2015, Effects of spatial resolution on slope and aspect derivation for regional-scale analysis, Comput. Geosci., 77, 111, 10.1016/j.cageo.2015.02.003 · DOI
- Chen, 2012, Comparison of drainage-constrained methods for DEM generalization, Comput. Geosci., 48, 41, 10.1016/j.cageo.2012.05.002 · doi:10.1016/j.cageo.2012.05.002
- Chen, 2013, A scale-adaptive DEM for multi-scale terrain analysis, Int. J. Geogr. Inf. Sci., 27, 1329, 10.1080/13658816.2012.739690 · doi:10.1080/13658816.2012.739690
- Ai, 2010, A DEM generalization by minor valley branch detection and grid filling, Isprs J. Photogramm. Remote Sens., 65, 198, 10.1016/j.isprsjprs.2009.11.001 · doi:10.1016/j.isprsjprs.2009.11.001
- Walker, 1999, On the effect of digital elevation model accuracy on hydrology and geomorphology, Water Resour. Res., 35, 2259, 10.1029/1999WR900034 · DOI · Paper page
- Gallant, J. (2011, January 7–8). Adaptive smoothing for noisy DEMs. Proceedings of the Geomorphometry 2011, Redlands, CA, USA.
- Barash, 2002, A fundamental relationship between bilateral filtering, adaptive smoothing, and the nonlinear diffusion equation, IEEE Trans. Pattern Anal. Mach. Intell., 26, 844, 10.1109/TPAMI.2002.1008390 · DOI · Paper page
- Usul, 2004, Effect of map scale and grid size for hydrological modelling, Iahs Publ., 289, 91
- Petrasova, 2017, Fusion of high-resolution DEMs for water flow modeling, Open Geospat. Datasoftware Stand., 2, 6, 10.1186/s40965-017-0019-2 · DOI
- Harwood, 1987, A new class of edge-preserving smoothing filters, Pattern Recognit. Lett., 6, 155, 10.1016/0167-8655(87)90002-X · DOI
- Paris, 2009, Bilateral filtering: Theory and applications, Found. Trends® Comput. Graph. Vis., 4, 1
- Fleishman, 2003, Bilateral mesh denoising, ACM, 22, 950
- Jones, 2003, Non-iterative, feature-preserving mesh smoothing, ACM, 22, 943
- Lee, K.-W., and Wang, W.-P. (2005, January 7–10). Feature-preserving mesh denoising via bilateral normal filtering. Proceedings of the Ninth International Conference on Computer Aided Design and Computer Graphics (CAD-CG’05), Hong Kong, China.
- Sun, 2007, Fast and effective feature-preserving mesh denoising, IEEE Trans. Vis. Comput. Graph., 13, 925, 10.1109/TVCG.2007.1065 · doi:10.1109/tvcg.2007.1065
- Zheng, 2010, Bilateral normal filtering for mesh denoising, IEEE Trans. Vis. Comput. Graph., 17, 1521, 10.1109/TVCG.2010.264 · DOI · Paper page
- Horn, 1981, Hill shading and the reflectance map, Proc. IEEE, 69, 14, 10.1109/PROC.1981.11918 · DOI · Paper page
- Chapman, L.J., and Putnam, D.F. (1973). Physiography of Southern Ontario, University of Toronto Press.
- Tarboton, 1997, A new method for the determination of flow directions and upslope areas in grid digital elevation models, Water Resour. Res., 33, 309, 10.1029/96WR03137 · DOI · Paper page
- James, 2007, Using LiDAR data to map gullies and headwater streams under forest canopy: South Carolina, USA, Catena, 71, 132, 10.1016/j.catena.2006.10.010 · DOI · Paper page
- Govers, 2000, Soil roughness and overland flow, Agronomie, 20, 131, 10.1051/agro:2000114 · DOI · Paper page
- Govers, 2007, Rill erosion: exploring the relationship between experiments, modelling and field observations, Earth-Sci. Rev., 84, 87, 10.1016/j.earscirev.2007.06.001 · doi:10.1016/j.earscirev.2007.06.001
- Montgomery, 1989, Source areas, drainage density, and channel initiation, Water Resour. Res., 25, 1907, 10.1029/WR025i008p01907 · DOI · Paper page
Cited by
A 30 m global map of elevation with forests and buildings removed
Hawker, L., Uhe, P., Paulo, L., Sosa, J., Savage, J., Sampson, C., & Neal, J. (2022) · Environmental Research Letters · doi:10.1088/1748-9326/ac4d4f · Cited by 907
Li, J., Zhao, Y., Bates, P., Neal, J., Tooth, S., Hawker, L., & Maffei, C. (2020) · Journal of Hydrology · doi:10.1016/j.jhydrol.2020.125617 · Cited by 29
Raulerson, S., Sytsma, C., Webster, J. R., & Jackson, C. R. (2023) · River Research and Applications · doi:10.1002/rra.4107 · Cited by 3
Metadata
- Authors
- Lindsay, J. B., Francioni, A., & Cockburn, J. M. H.
- Affiliations
- Department of Geography, Environment & Geomatics, The University of Guelph, 50 Stone Rd. E, Guelph, ON N1G 2W1, Canada
- Venue
- Remote Sensing
- Publisher
- MDPI AG
- Published
- 2019-08-17
- Volume
- 11
- Issue
- 16
- Pages
- 1926
- ISSN
- 2072-4292
- Cited by
- 67
- References
- 1
- Language
- en
- Funders
- Natural Sciences and Engineering Research Council of Canada (400317)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: LiDAR DEM Smoothing and the Preservation of Drainage Features. https://app.cochat.ai/papers/10.3390/rs11161926
- The paper
- Lindsay, J. B., Francioni, A., & Cockburn, J. M. H. (2019). LiDAR DEM Smoothing and the Preservation of Drainage Features. Remote Sensing. https://doi.org/10.3390/rs11161926
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.