The effects of different steam‐sterilization programs on material properties of poly(L‐lactide)
The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Abstract
As‐polymerized poly(L‐lactide) test rods were sterilized by seven different specially designed computer‐operated autoclaving programs. As a control, common hospital sterilization was performed. In all cases, the molecular weight decreased after sterilization. A short time high‐temperature sterilization lead to less molecular weight decrease than a low sterilization temperature cycle with a longer sterilization time. Regular hospital sterilization significantly reduced the elongation at break and also resulted in a decrease of 35% in tensile strength. The program causing minimal damage to the material properties was studied in detail. This program, with a steriliztioan period of 60 s and 129°C, was effective for PLLA steriliztation and also looks very promising for sterilization of other thermo‐ and moisture‐labile polymers.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90009-0 · Cited by 1,345
Pitt, G. G., Gratzl, M. M., Kimmel, G. L., Surles, J., & Sohindler, A. (1981) · Biomaterials · doi:10.1016/0142-9612(81)90060-0 · Cited by 857
Resorbable materials of poly(l-lactide)
Leenslag, J. W., Pennings, A. J., Bos, R. R. M., Rozema, F. R., & Boering, G. (1987) · Biomaterials · doi:10.1016/0142-9612(87)90121-9 · Cited by 329
Self-citationResorbable poly(L-lactide) plates and screws for the fixation of zygomatic fractures
Bos, R. R. M., Boering, G., Rozema, F. R., & Leenslag, J. W. (1987) · Journal of Oral and Maxillofacial Surgery · doi:10.1016/0278-2391(87)90194-7 · Cited by 324
Self-citationResorbable materials of poly(l-lactide). VI. Plates and screws for internal fracture fixation
Leenslag, J. W., Pennings, A. J., Bos, R. R. M., Rozema, F. R., & Boering, G. (1987) · Biomaterials · doi:10.1016/0142-9612(87)90034-2 · Cited by 295
Self-citationSynthesis of high‐molecular‐weight poly(L‐lactide) initiated with tin 2‐ethylhexanoate
Leenslag, J. W., & Pennings, A. J. (1987) · Die Makromolekulare Chemie · doi:10.1002/macp.1987.021880804 · Cited by 290
Self-citationBos, R. R. M., Rozema, F. B., Boering, G., Nijenhius, A. J., Pennings, A. J., Verwey, A. B., Nieuwenhuis, P., & Jansen, H. W. B. (1991) · Biomaterials · doi:10.1016/0142-9612(91)90128-w · Cited by 271
Self-citationPitt, C. G., Gratzl, M. M., Jeffcoat, A. R., Zweidinger, R., & Schindler, A. (1979) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.2600681219 · Cited by 204
Leukemia in Workers Exposed to Ethylene Oxide
Hogstedt, C., Malmqvist, N., & Wadman, B. (1979) · JAMA · doi:10.1001/jama.1979.03290370036024 · Cited by 160
A two-year inhalation study of the carcinogenic potential of ethylene oxide in fischer 344 rats*1
Snellings, W. M., Weil, C. S., & Maronpot, R. R. (1984) · Toxicology and Applied Pharmacology · doi:10.1016/0041-008x(84)90081-4 · Cited by 154
Research works printed but not linked: 5
- Heponen V.‐P.;Pohjonen T.;Vainionpää S.;Törmälä P.The effect of gamma‐radiation on mechanical properties of biodegradable poly‐l‐lactide fibers. Transactions of the Third World Biomaterials Congress;281: Kyoto Japan;1988April 21–25.
- Lynch D. W., 1981, Carcinogenic and toxicologic effects of safety and health series no. 46, 249
- Wallhäuser K. H., 1978, Keimidentifizierung‐Betriebshygiene
- Whitby J. L.Microbiological aspects of radiation dose setting. Proceedings on the third gamma processing seminar; Technical paper GPS 343 Atomic Energy of Canada Limited Ottawa;1983June 6–9.
- Davis K. W.A statistical point of view of gamma irradiation sterilization dose setting in North America. Proceedings on the third gamma processing seminar; Technical paper GPS 342 Atomic Energy of Canada Limited Ottawa;1983June 6–9.
Cited by
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Athanasiou, K. A., Niederauer, G. G., & Agrawal, C. M. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85754-1 · Cited by 1,497
Biodegradable polymer matrix nanocomposites for tissue engineering: A review
Armentano, I., Dottori, M., Fortunati, E., Mattioli, S., & Kenny, J. M. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.06.007 · Cited by 999
“Other sterilization procedures, such as heat, steam or acid, cause extensive deformation of the devices and accelerated polymer degradation [204].”
BackgroundShape-memory polymers as a technology platform for biomedical applications
Lendlein, A., Behl, M., Hiebl, B., & Wischke, C. (2010) · Expert Review of Medical Devices · doi:10.1586/erd.10.8 · Cited by 469
Sterilization techniques for biodegradable scaffolds in tissue engineering applications
Dai, Z., Ronholm, J., Tian, Y., Sethi, B., & Cao, X. (2016) · Journal of Tissue Engineering · doi:10.1177/2041731416648810 · Cited by 355
Metadata
- Authors
- Rozema, F. R., Bos, R. R. M., Boering, G., van Asten, J. A. A. M., Nijenhuis, A. J., & Pennings, A. J.
- Affiliations
- University Medical Center Groningen (NL)
- University of Groningen (NL)
- Corresponding author
- Rozema, F. R.
- ORCID
- Rozema, F. R.
- Venue
- Journal of Applied Biomaterials
- Publisher
- Wiley
- Published
- 1991-03
- Volume
- 2
- Issue
- 1
- Pages
- 23-28
- ISSN
- 1045-4861 (ISSN-L)
- 1549-9316
- OpenAlex
- W1971775104
- Cited by
- 57
- References
- 20
- Citations by year
- 2024: 1 · 2023: 2 · 2022: 3 · 2021: 6 · 2020: 3 · 2019: 6 · 2018: 3 · 2017: 2 · 2016: 5 · 2015: 1 · 2014: 2 · 2013: 3 · 2012: 2
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Applied Biomaterials (publishedVersion)
- PubMed (publishedVersion)
- University of Groningen research database (University of Groningen / Centre for Information Technology) (submittedVersion)
- Topics
- Life Sciences › Immunology and Microbiology › Microbiology › Medical Device Sterilization and Disinfection
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Keywords
- poly(L-lactic acid), autoclaving, sterilization temperature, sterilization time, molecular weight degradation, tensile strength, elongation at break, polymer properties
- MeSH terms
- Humans, Materials Testing, Molecular Weight, Polyesters, Sterilization, Tensile Strength
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The effects of different steam‐sterilization programs on material properties of poly(L‐lactide). https://app.cochat.ai/papers/10.1002/jab.770020104
- The paper
- Rozema, F. R., Bos, R. R. M., Boering, G., van Asten, J. A. A. M., Nijenhuis, A. J., & Pennings, A. J. (1991). The effects of different steam‐sterilization programs on material properties of poly(L‐lactide). Journal of Applied Biomaterials. https://doi.org/10.1002/jab.770020104
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.