The effects of different steam‐sterilization programs on material properties of poly(L‐lactide)
The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Abstract
As‐polymerized poly(L‐lactide) test rods were sterilized by seven different specially designed computer‐operated autoclaving programs. As a control, common hospital sterilization was performed. In all cases, the molecular weight decreased after sterilization. A short time high‐temperature sterilization lead to less molecular weight decrease than a low sterilization temperature cycle with a longer sterilization time. Regular hospital sterilization significantly reduced the elongation at break and also resulted in a decrease of 35% in tensile strength. The program causing minimal damage to the material properties was studied in detail. This program, with a steriliztioan period of 60 s and 129°C, was effective for PLLA steriliztation and also looks very promising for sterilization of other thermo‐ and moisture‐labile polymers.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90009-0 · Cited by 1,345
Pitt, G. G., Gratzl, M. M., Kimmel, G. L., Surles, J., & Sohindler, A. (1981) · Biomaterials · doi:10.1016/0142-9612(81)90060-0 · Cited by 857
Resorbable materials of poly(l-lactide)
Leenslag, J. W., Pennings, A. J., Bos, R. R. M., Rozema, F. R., & Boering, G. (1987) · Biomaterials · doi:10.1016/0142-9612(87)90121-9 · Cited by 329
Self-citationResorbable poly(L-lactide) plates and screws for the fixation of zygomatic fractures
Bos, R. R. M., Boering, G., Rozema, F. R., & Leenslag, J. W. (1987) · Journal of Oral and Maxillofacial Surgery · doi:10.1016/0278-2391(87)90194-7 · Cited by 324
Self-citationResorbable materials of poly(l-lactide). VI. Plates and screws for internal fracture fixation
Leenslag, J. W., Pennings, A. J., Bos, R. R. M., Rozema, F. R., & Boering, G. (1987) · Biomaterials · doi:10.1016/0142-9612(87)90034-2 · Cited by 295
Self-citationSynthesis of high‐molecular‐weight poly(L‐lactide) initiated with tin 2‐ethylhexanoate
Leenslag, J. W., & Pennings, A. J. (1987) · Die Makromolekulare Chemie · doi:10.1002/macp.1987.021880804 · Cited by 290
Self-citationBos, R. R. M., Rozema, F. B., Boering, G., Nijenhius, A. J., Pennings, A. J., Verwey, A. B., Nieuwenhuis, P., & Jansen, H. W. B. (1991) · Biomaterials · doi:10.1016/0142-9612(91)90128-w · Cited by 271
Self-citationPitt, C. G., Gratzl, M. M., Jeffcoat, A. R., Zweidinger, R., & Schindler, A. (1979) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.2600681219 · Cited by 204
Leukemia in Workers Exposed to Ethylene Oxide
Hogstedt, C., Malmqvist, N., & Wadman, B. (1979) · JAMA · doi:10.1001/jama.1979.03290370036024 · Cited by 160
A two-year inhalation study of the carcinogenic potential of ethylene oxide in fischer 344 rats*1
Snellings, W. M., Weil, C. S., & Maronpot, R. R. (1984) · Toxicology and Applied Pharmacology · doi:10.1016/0041-008x(84)90081-4 · Cited by 154
Research works printed but not linked: 5
- Heponen V.‐P.;Pohjonen T.;Vainionpää S.;Törmälä P.The effect of gamma‐radiation on mechanical properties of biodegradable poly‐l‐lactide fibers. Transactions of the Third World Biomaterials Congress;281: Kyoto Japan;1988April 21–25.
- Lynch D. W., 1981, Carcinogenic and toxicologic effects of safety and health series no. 46, 249
- Wallhäuser K. H., 1978, Keimidentifizierung‐Betriebshygiene
- Whitby J. L.Microbiological aspects of radiation dose setting. Proceedings on the third gamma processing seminar; Technical paper GPS 343 Atomic Energy of Canada Limited Ottawa;1983June 6–9.
- Davis K. W.A statistical point of view of gamma irradiation sterilization dose setting in North America. Proceedings on the third gamma processing seminar; Technical paper GPS 342 Atomic Energy of Canada Limited Ottawa;1983June 6–9.
Cited by
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Athanasiou, K. A., Niederauer, G. G., & Agrawal, C. M. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85754-1 · Cited by 1,497
Biodegradable polymer matrix nanocomposites for tissue engineering: A review
Armentano, I., Dottori, M., Fortunati, E., Mattioli, S., & Kenny, J. M. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.06.007 · Cited by 999
“Other sterilization procedures, such as heat, steam or acid, cause extensive deformation of the devices and accelerated polymer degradation [204].”
BackgroundShape-memory polymers as a technology platform for biomedical applications
Lendlein, A., Behl, M., Hiebl, B., & Wischke, C. (2010) · Expert Review of Medical Devices · doi:10.1586/erd.10.8 · Cited by 469
Sterilization techniques for biodegradable scaffolds in tissue engineering applications
Dai, Z., Ronholm, J., Tian, Y., Sethi, B., & Cao, X. (2016) · Journal of Tissue Engineering · doi:10.1177/2041731416648810 · Cited by 355
Three-dimensional printing surgical instruments: are we there yet?
Rankin, T. M., Giovinco, N. A., Cucher, D. J., Watts, G., Hurwitz, B., & Armstrong, D. G. (2014) · Journal of Surgical Research · doi:10.1016/j.jss.2014.02.020 · Cited by 275
“A benefit of glutaraldehyde sterilization is its simplicity, cost efficiency, brief time requirement, and reusability without impacting the strength or form of PLA [8].”
The Role of 3D Printing Technology in Microengineering of Microneedles
Detamornrat, U., McAlister, E., Hutton, A. R. J., Larrañeta, E., & Donnelly, R. F. (2022) · Small · doi:10.1002/smll.202106392 · Cited by 199
Baroli, B. (2006) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.1468 · Cited by 179
Shape-Memory Polymers for Biomedical Applications
Yakacki, C. M., & Gall, K. (2009) · Advances in polymer science · doi:10.1007/12_2009_23 · Cited by 167
Chong, W. J., Shen, S., Li, Y., Trinchi, A., Simunec, D. P., Kyratzis, I. L., Sola, A., & Wen, C. (2021) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.09.039 · Cited by 145
Enabling personalized implant and controllable biosystem development through 3D printing
Nagarajan, N., Dupret‐Bories, A., Karabulut, E., Zorlutuna, P., & Vrana, N. E. (2018) · Biotechnology Advances · doi:10.1016/j.biotechadv.2018.02.004 · Cited by 141
How to Sterilize Polylactic Acid Based Medical Devices?
Pérez-Davila, S., González-Rodríguez, L., Chiussi, S., Serra, J., & González, P. (2021) · Polymers · doi:10.3390/polym13132115 · Cited by 123
Bioresorbable implants — practical considerations
Pietrzak, W. S., Sarver, D. R., & Verstynen, M. L. (1996) · Bone · doi:10.1016/s8756-3282(96)00139-1 · Cited by 112
Silk-Based Composite Scaffolds for Tissue Engineering Applications
Tandon, S., Kandasubramanian, B., & Ibrahim, S. M. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c02195 · Cited by 95
Polylactides in additive biomanufacturing
Poh, P. S. P., Chhaya, M. P., Wunner, F. M., De‐Juan‐Pardo, E. M., Schilling, A. F., Schantz, J., van Griensven, M., & Hutmacher, D. W. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.07.006 · Cited by 88
On the intrinsic sterility of 3D printing
NECHES, R. Y., Flynn, K. J., Zaman, L., Tung, E., & Pudlo, N. A. (2016) · PeerJ · doi:10.7717/peerj.2661 · Cited by 85
The presence of 3D printing in orthopedics: A clinical and material review
Colon, R. R., Nayak, V. V., Parente, P. E. L., Leucht, P., Tovar, N., Lin, C. C., Rezzadeh, K. T., Hacquebord, J. H., Coelho, P. G., & Witek, L. (2022) · Journal of Orthopaedic Research® · doi:10.1002/jor.25388 · Cited by 71
Nuutinen, J., Clerc, C. O., Virta, T., & Törmälä, P. (2002) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/15685620260449723 · Cited by 64
Cytotoxicity of poly(96l/4d-lactide): the influence of degradation and sterilization
Cordewener, F. W., van Geffen, M. F., Joziasse, C. A. P., Schmitz, J. P., Bos, R. R. M., Rozema, F. R., & Pennings, A. J. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00111-3 · Cited by 63
Self-citationApplications of 3‐dimensional printing in small‐animal surgery: A review of current practices
Altwal, J., Wilson, C. H., & Griffon, D. J. (2021) · Veterinary Surgery · doi:10.1111/vsu.13739 · Cited by 53
Yakacki, C. M., Lyons, M. B., Rech, B., Gall, K., & Shandas, R. (2008) · Biomedical Materials · doi:10.1088/1748-6041/3/1/015010 · Cited by 50
Valls-Esteve, A., Lustig-Gainza, P., Adell-Gómez, N., Tejo‐Otero, A., Rueda, M. E., Julian-Alvarez, E., Navarro-Sureda, O., Fenollosa-Artés, F., Rubio-Palau, J., Krauel, L., et al. (2023) · International Journal of Bioprinting · doi:10.18063/ijb.756 · Cited by 49
The Future of Biodegradable Osteosyntheses
Cordewener, F. W., & Schmitz, J. P. (2000) · Tissue Engineering · doi:10.1089/107632700418119 · Cited by 48
Bergsma, J. E., Rozema, F. R., Bos, R. R. M., van Rozendaal, A., de Jong, W. H., Teppema, J. S., & Joziasse, C. A. P. (1995) · Journal of Materials Science Materials in Medicine · doi:10.1007/bf00134307 · Cited by 45
Self-citationToward Patient-Specific 3D-Printed Robotic Systems for Surgical Interventions
Desai, J. P., Sheng, J., Cheng, S. S., Wang, X., Deaton, N. J., & Rahman, N. (2019) · IEEE Transactions on Medical Robotics and Bionics · doi:10.1109/tmrb.2019.2912444 · Cited by 44
Reddy, L. H., & Bazile, D. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.08.012 · Cited by 44
Applications of Biodegradable Lactides and Glycolides in Podiatry
Athanasiou, K. A., Niederauer, G. G., Agrawal, C. M., & Landsman, A. S. (1995) · Clinics in Podiatric Medicine and Surgery · doi:10.1016/s0891-8422(23)00954-0 · Cited by 35
Chen, J., Tanaka, K., Dang, A. B. C., & Dang, A. C. (2020) · 3D Printing in Medicine · doi:10.1186/s41205-020-00062-9 · Cited by 31
A next generation, pilot-scale continuous sterilization system for fermentation media
Junker, B., Lester, M., Brix, T., Wong, D. L. Y., & Nuechterlein, J. (2006) · Bioprocess and Biosystems Engineering · doi:10.1007/s00449-005-0041-0 · Cited by 31
“In the case of polymerized poly (L-lactide) rod implants, lower molecular weight decreases also have been found for autoclave cycles at higher temperatures and shorter times [88].”
BackgroundThe effect of sterilization methods on the thermo-gelation properties of xyloglucan hydrogels
Silva, A., Richard, C., Bessodes, M., Scherman, D., Narita, T., Ducouret, G., & Merten, O. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.11.001 · Cited by 29
Aggarwal, S., Johnson, S., Saloni, D. E., & Hakovirta, M. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107310 · Cited by 27
Neijhoft, J., Henrich, D. M., Kammerer, A., Janko, M., Frank, J. M., & Marzi, İ. (2023) · Polymers · doi:10.3390/polym15020369 · Cited by 23
Chen, J., Dang, A. B. C., Lee, C. S., & Dang, A. B. C. (2019) · 3D Printing in Medicine · doi:10.1186/s41205-019-0053-z · Cited by 20
Carfagni, M., Facchini, F., Furferi, R., Ghionzoli, M., Governi, L., Messineo, A., Uccheddu, F., & Volpe, Y. (2018) · Journal of Computational Design and Engineering · doi:10.1016/j.jcde.2018.01.001 · Cited by 16
“However, auto-claving often compromises the structural integrity of many plastics as reported in Meseguer-Olmo et al. (2013), Rozema et al. (1991).”
M., D., & Tencer, A. F. (1997) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(19970615)35:4<433::aid-jbm3>3.0.co;2-i · Cited by 16
Controlled-release injectable microemulsions: recent advances and potential opportunities
Dubey, R. (2013) · Expert Opinion on Drug Delivery · doi:10.1517/17425247.2014.870151 · Cited by 15
“temperature lower than sterilization temperature, and hence, significantly lose their tensile strength [10,11].”
BackgroundBiodegradable Polymers for Orthopaedic Applications
Agrawal, C. M. (2002) · Springer eBooks · doi:10.1007/978-94-010-0305-6_3 · Cited by 15
Polyisocyanopeptide Hydrogels Are Effectively Sterilized Using Supercritical Carbon Dioxide
Veld, R. C. O. ‘., Eerden, M., Wagener, F. A. D. T. G., Kouwer, P. H. J., Jansen, J. A., & Walboomers, X. F. (2019) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2019.0305 · Cited by 13
“6,30,31 The intense heat and drying steps cause a complete loss of the hydrogel’s characteristics, making them unusable in any form.”
Irradiation of poly( l -lactide) biopolymer reinforced with functionalized MWCNTs
Chakoli, A. N., He, J., Chayjan, M. A., Huang, Y., & Zhang, B. (2015) · RSC Advances · doi:10.1039/c5ra08319b · Cited by 12
Effect of steam on the structural and morphological stability of renewable poly(ether‐block‐amide)s
Todros, S., NATALI, A. N., Pace, G., & Noto, V. D. (2013) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.23434 · Cited by 11
Steinemann, D. C., Müller, P. C., Apitz, M., Nickel, F., Kenngott, H. G., Müller-Stich, B. P., & Linke, G. R. (2017) · Journal of Surgical Research · doi:10.1016/j.jss.2017.10.026 · Cited by 11
Methods for Sterilization of Biopolymers for Biomedical Applications
Beh, C. C., Farah, S., Langer, R., & Jaklenec, A. (2019) · Royal Society of Chemistry eBooks · doi:10.1039/9781788012638-00325 · Cited by 11
Hsu, C.-P., Lin, C., Fan, C.-H., Chiang, N.-Y., Tsai, C.-W., Chang, C.-M., & Liu, I. (2020) · BMC Veterinary Research · doi:10.1186/s12917-020-02691-y · Cited by 11
Basic Concepts of Sterilization Techniques
Kumar, R., & Rana, A. (2021) · Research Journal of Pharmacology and Pharmacodynamics · doi:10.52711/2321-5836.2021.00029 · Cited by 10
3D printing and nanotechnology
Tzounis, L., & Bangeas, P. (2021) · Elsevier eBooks · doi:10.1016/b978-0-323-66193-5.00002-2 · Cited by 10
Diep, T. T., Ray, P. P., & Edwards, A. D. (2021) · Letters in Applied Microbiology · doi:10.1111/lam.13615 · Cited by 10
“Some changes to materials properties may occur after sterilisation either with autoclaving or 70% ethanol treat-ment, however, this class of polymer can be degraded by autoclaving (Rozema et al .”
BackgroundJiménez‐Bonilla, P., Salas-Arias, J., Esquivel, M., & Vega‐Baudrit, J. R. (2014) · Journal of Polymers and the Environment · doi:10.1007/s10924-014-0667-6 · Cited by 10
Sastri, V. R. (2010) · Elsevier eBooks · doi:10.1016/b978-0-8155-2027-6.10009-1 · Cited by 9
Other Polymers: Styrenics, Silicones, Thermoplastic Elastomers, Biopolymers, and Thermosets
Sastri, V. R. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-85126-8.00007-2 · Cited by 8
Biodegradable Microparticles for the Development of Less-Painful and Less-Irritating Parenterals
Fattal, E., Quaglia, F., Gupta, P., & Brazeau, G. A. (1999) · CRC Press eBooks · doi:10.1201/b14378-19 · Cited by 5
Castillo, Y. S. (2012) · DigitalCommons - CalPoly (California State Polytechnic University) · doi:10.15368/theses.2012.97 · Cited by 5
Doherty, D., Rochfort, K. D., Conaghan, M., Loughlin, J. O., Freeland, B. H., Cooling, C., Solola, D., Brych, Y., Kelleher, S. M., Fahy, S., et al. (2024) · Sustainable materials and technologies · doi:10.1016/j.susmat.2024.e00899 · Cited by 4
Sastri, V. R. (2013) · Elsevier eBooks · doi:10.1016/b978-1-4557-3201-2.00009-4 · Cited by 4
Ceramic-polylactide composite material used in a model of healing of osseous defects in rabbits
Myciński, P., Zarzecka, J., Skórska-Stania, A., Jelonek, A., Okoń, K., & Wróbel, M. (2017) · Polish Journal of Pathology · doi:10.5114/pjp.2017.69692 · Cited by 3
“The choice of sterilisation method depends on the substances from which the medical product is produced [17, 18, 19, 20].”
Biodegradable scaffolds for bone defect treatment
Antonowicz, M., Brzezińska, B., Walke, W., Taratuta, A., & Pawlik, M. (2023) · Acta of Bioengineering and Biomechanics · doi:10.37190/abb-02318-2023-03 · Cited by 1
Polyester-based Biodegradable Systems Incorporating POSS
Knight, P. T. (2010) · OhioLink ETD Center (Ohio Library and Information Network)
Peleias, F. S. (2017) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/t.85.2017.tde-10082017-120230
Samourides, A. (2019) · White Rose eTheses Online (University of Leeds, The University of Sheffield, University of York)
Selección de osteosíntesis en la reconstrucción maxilar con injerto óseo de cresta iliaca
Netto, H. D. D. M. C., Olate, S., Rodríguez-Chessa, J., Kluppel, L., Moraes, M. D., & Mazzonetto, R. (2013) · USMP Repository (Universidad de San Martín de Porres)
Stérilisation des systèmes de délivrance de phages à base de polymères biodégradables
Lamara, I. (2019) · PolyPublie (École Polytechnique de Montréal)
Evaluation of camptothecin microspheres in cancer therapy.
Tong, W. (2002) · Mercer University Libraries (Mercer University)
Ανάπτυξη συμβατών βιοαισθητήρων για βιοϊατρικές εφαρμογές
Ψυχογυιός, Β. (2015) · doi:10.12681/eadd/35934
Metadata
- Authors
- Rozema, F. R., Bos, R. R. M., Boering, G., van Asten, J. A. A. M., Nijenhuis, A. J., & Pennings, A. J.
- Affiliations
- University Medical Center Groningen (NL)
- University of Groningen (NL)
- Corresponding author
- Rozema, F. R.
- ORCID
- Rozema, F. R.
- Venue
- Journal of Applied Biomaterials
- Publisher
- Wiley
- Published
- 1991-03
- Volume
- 2
- Issue
- 1
- Pages
- 23-28
- ISSN
- 1045-4861 (ISSN-L)
- 1549-9316
- OpenAlex
- W1971775104
- Cited by
- 57
- References
- 20
- Citations by year
- 2024: 1 · 2023: 2 · 2022: 3 · 2021: 6 · 2020: 3 · 2019: 6 · 2018: 3 · 2017: 2 · 2016: 5 · 2015: 1 · 2014: 2 · 2013: 3 · 2012: 2
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Applied Biomaterials (publishedVersion)
- PubMed (publishedVersion)
- University of Groningen research database (University of Groningen / Centre for Information Technology) (submittedVersion)
- Topics
- Life Sciences › Immunology and Microbiology › Microbiology › Medical Device Sterilization and Disinfection
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Keywords
- poly(L-lactic acid), autoclaving, sterilization temperature, sterilization time, molecular weight degradation, tensile strength, elongation at break, polymer properties
- MeSH terms
- Humans, Materials Testing, Molecular Weight, Polyesters, Sterilization, Tensile Strength
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.