The DOI matches its Crossref record.
Permeability properties of gels and membranes derived from chitosan
Abstract
A series of membranes was prepared by air‐drying the thin layers of N‐acyl‐ and N‐arylidene‐chitosan gels. Their flow rates of water and permeabilities of various compounds were examined. N‐Acylchitosan membranes were stable in both dilute acid and alkali, but N‐arylidene‐chitosan membranes were unstable in dilute acid. N‐Acetylchitosan membranes were stable in formic acid at room temperature for up to 7 hr. The flow rates of water through N‐acetylchitosan membranes were 10.0–23.6 × 10−3 ml/cm 2 min under a pressure of 3 kg/cm 2, and were unchanged by the membrane thickness (12–60 μm). The increase of carbon numbers for N‐acyl groups caused a slight decrease in the flow rates, and the flow rates were decreased by partial O‐acetylation of N‐acetylchitosan membranes. The flow rate of water through chitosan membranes (thickness 30–35 μm) was 7.1 × 10−4 ml/cm 2 min, which was decreased by an increase in the membranes thickness. Low‐molecular‐weight compounds (MW < 2900) passed through these membranes, but high molecular‐weight compounds (MW > 13,000) did not pass through.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In turn, Hirano et al. prepared chitosan-based membranes, which displayed good properties in dialysis treatment [109].”
From Chitosan: A Natural Biopolymer with a Wide and Varied Range of Applications (2020) · cites this paper as [109]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
No references could be resolved yet.
Research works printed but not linked: 13
- Muzzarelli R. A. A., 1977, Chitin, 69
- T.YakuandI.Yamashita Japan Patent 19 213 (1973). · doi:10.1080/03772063.1973.11487158
- 10.1021/ja00512a008 · doi:10.1021/ja00512a008
- Danilov S. N., 1958, The Study of Chitin, Hydroxyethyl and Ethyl Ethers of Chitin, Zhur. Obshei Khim., 28, 2255
- 1959, Chem. Abs., 53, 3747
- 10.1271/bbb1961.42.1939 · DOI
- 10.1016/S0008-6215(00)86086-3 · doi:10.1016/s0008-6215(00)86086-3
- 10.1016/S0008-6215(00)86085-1 · doi:10.1016/s0008-6215(00)86085-1
- 10.1042/bj0500298 · DOI · Paper page
- Imoto T., 1971, A Simple Activity Measurement of Lysozyme, Agric. Biol. Chem., 35, 1154, 10.1080/00021369.1971.10860050 · DOI
- 10.1016/S0021-9258(19)52451-6 · DOI · Paper page
- 10.1002/bip.1977.360160912 · doi:10.1002/bip.1977.360160912
- 10.1002/bit.260210415 · DOI
Cited by
Chitosan: A Natural Biopolymer with a Wide and Varied Range of Applications
Jiménez-Gómez, C. P., & Cecilia, J. A. (2020) · Molecules · doi:10.3390/molecules25173981 · Cited by 817
Chandy, T., & Sharma, C. P. (1990) · Biomaterials, Artificial Cells and Artificial Organs · doi:10.3109/10731199009117286 · Cited by 757
Chitin and Chitosan: Structure, Properties and Applications in Biomedical Engineering
Islam, S., Bhuiyan, M. A. R., & Islam, M. N. (2017) · Journal of Polymers and the Environment · doi:10.1007/s10924-016-0865-5 · Cited by 738
Hirano, S. (2002) · Ullmann's Encyclopedia of Industrial Chemistry · doi:10.1002/14356007.a06_231 · Cited by 562
Self-citationApplications of Chitin and Chitosan for Biomaterials
Shigemasa, Y., & Minami, S. (1996) · Biotechnology and Genetic Engineering Reviews · doi:10.1080/02648725.1996.10647935 · Cited by 312
CHITIN AND CHITOSAN FOR VERSATILE APPLICATIONS
Dutta, P. K., Ravikumar, M. N. V., & Dutta, J. (2002) · Journal of Macromolecular Science, Part C · doi:10.1081/mc-120006451 · Cited by 262
Metadata
- Authors
- Hirano, S., Tobetto, K., Hasegawa, M., & Matsuda, N.
- Venue
- Journal of Biomedical Materials Research
- Publisher
- Wiley
- Published
- 1980-07
- Volume
- 14
- Issue
- 4
- Pages
- 477-485
- ISSN
- 0021-9304
- 1097-4636
- Cited by
- 61
- References
- 0
- Language
- en
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.