Physicochemical characterization and in vivo blood tolerability of cast and extruded biomer
The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Abstract
Solution grade and extruded grade Biomer (SB and EB, respectively) are polyurethanes that have been suggested for use in biomedical applications. The bulk materials were examined by elemental analysis, differential scanning calorimetry, thermomechanical testing, and stress‐strain testing. The extruded grade material has a lower soft segment molecular weight (650 g/mol) than the solution grade material (2000 g/mol). As a result of its higher molecular weight, the soft segment phase of SB is semicrystalline in the solid state. The hard segments of the extruded grade material are chain extended with water yielding a lower urea concentration than in the solution grade material in which the hard segments are chain extended with diamines. Chemical structures for the two materials consistent with elemental analysis, urea/urethane ratios and thermal and mechanical data, are proposed. X‐ray photoelectron spectroscopy (ESCA) was used to analyze the surfaces of extruded grade Biomer, solution grade Biomer cast on the inner surface of polyethylene tubing, and extruded grade Biomer dissolved in DMA and similarly cast on polyethylene (CB). Soft segment concentrations were highest on the EB surface and lowest on the SB surface. Soft segment concentrations on the EB surface were higher than on the CB surface, indicating that the method of fabrication affected the composition of the surface layer. The three materials were tested for blood tolerance in a canine femoral arteriovenous shunt configuration. Blood compatibility was correlated with increasing concentration of polyether soft segments on the surface.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Variations in PEU blood compatibility have been observed, with improved thromboresistance correlating to more alkylated soft segments [82], higher soft segment content on the surface [83] and surface treatment, such as grafted sulfonate groups [84,85].”
From Shape-memory polymers as a technology platform for biomedical applications (2010) · cites this paper as [85]
Citations
Cites
Identification and Analysis of Plastics
Haslam, J., & Willis, H. A. (1965) · International Linear Collider · Cited by 220
Dynamic mechanical properties of polyurethane block polymers
Huh, D. S., & Cooper, S. L. (1971) · Polymer Engineering & Science · doi:10.1002/pen.760110504 · Cited by 202
Self-citationA technique for the characterization of hydrophilic solid surfaces
Hamilton, W. C. (1972) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(72)90011-2 · Cited by 200
In vivo evaluation of artificial surfaces with a nonhuman primate model of arterial thrombosis.
Hanson, S. R., Harker, L. A., Ratner, B. D., & Hoffman, A. S. (1980) · PubMed · Cited by 192
Contact angles at the solid—water interface
Andrade, J. D., Ma, S. M., King, R. N., & Gregonis, D. E. (1979) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(79)90350-3 · Cited by 188
Annealing-induced morphological changes in segmented elastomers
Van Bogart, J. W. C., Bluemke, D. A., & Cooper, S. L. (1981) · Polymer · doi:10.1016/0032-3861(81)90250-0 · Cited by 168
Self-citationIdentification and analysis of plastics
Brame, E. G. (1966) · Journal of Colloid and Interface Science · doi:10.1016/0095-8522(66)90093-6 · Cited by 147
Lyman, D. J., Muir, W. M., & Lee, I. J. (1965) · ASAIO Journal · doi:10.1097/00002480-196504000-00056 · Cited by 109
Surface and bulk characteristics of a polyether urethane for artificial hearts
BORETOS, J. W., Pierce, W. S., Baier, R. E., LeRoy, A. F., & Donachy, H. J. (1975) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820090308 · Cited by 89
Segmented polyurethane: A polyether polymer, II. Two years experience
BORETOS, J. W., Detmer, D. E., & Donachy, J. H. (1971) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820050408 · Cited by 87
Research works printed but not linked: 2
- Pierce W. S., 1967, Trans. ASAIO, 13, 299
- Hanson S. R., 1980, In‐vivo evaluation of artificial surfaces with a nonhuman primate model of arterial thrombosis, J. Lab. Clin. Med., 95, 289
Cited by
Items 101–134 of 134
Investigation of Morphology and Sorption-Diffusion Characteristics of Segmented Polyetherurethanes
Razumovsky, L., Иорданский, А. Л., Ll, R., & Zaikov, G. E. (1995) · International Journal of Polymeric Materials · doi:10.1080/00914039508009664 · Cited by 5
Lendlein, A., Razzaq, M. Y., Wischke, C., Kratz, K. L., Heuchel, M., Zotzmann, J., Hiebl, B., Neffe, A. T., & Behl, M. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.10213-9 · Cited by 5
Lendlein, A., Wischke, C., Kratz, K. L., Heuchel, M., Zotzmann, J., Hiebl, B., Neffe, A. T., & Behl, M. (2011) · Elsevier eBooks · doi:10.1016/b978-0-08-055294-1.00271-3 · Cited by 8
The development and the testing of a polyurethane (Biomer) arterial prosthesis
Annis, D. B. (1989) · Bulletin of Materials Science · doi:10.1007/bf02744592 · Cited by 5
Blood hemolysis by PTFE and polyurethane vascular prostheses in an in vitro circuit
Martz, H., Paynter, R. W., Losier, M., Domurado, D., Forest, J., & Guidoin, R. (1987) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820211003 · Cited by 5
Lelah, M. D., Cooper, S. L., Ohnuma, H., & Kotaka, T. (1985) · Polymer Journal · doi:10.1295/polymj.17.841 · Cited by 5
Self-citationNURDIN, N., François, P., Magnani, A., Xanthopoulos, N., Mathieu, H. J., Barbucci, R., Vaudaux, P. E., & Descouts, P. (1996) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856295x00823 · Cited by 5
ESCA for the Study of Biomaterial Surfaces
Ratner, B. D. (1986) · Springer eBooks · doi:10.1007/978-1-4613-1809-5_2 · Cited by 5
Characterization of Polyurethanes for Blood-Contacting Applications
Cooper, S. L., Lelah, M. D., & Grasel, T. G. (1986) · Springer eBooks · doi:10.1007/978-1-4613-1809-5_16 · Cited by 4
Self-citationXPS Analysis of Acid Etched Poly (2-Hydroxyethyl Methacrylate) Surfaces
Griesser, H. J., Meijs, G. F., & McAuslan, B. R. (1990) · Journal of Bioactive and Compatible Polymers · doi:10.1177/088391159000500203 · Cited by 4
Characterization of Biomaterials
Lyman, D. J. (2005) · Kluwer Academic Publishers eBooks · doi:10.1007/0-306-47583-9_8 · Cited by 4
In-Vitro and In-Vivo Test Methods for Assessing Bloodcompatibility
Wilson, R., & Cooper, S. L. (1986) · Springer eBooks · doi:10.1007/978-94-009-4390-2_2 · Cited by 4
Self-citationSpectrometric and chromatographic methods for the analysis of polymeric explant materials
Richards, J. M., Meuzelaar, H. L. C., & Bunger, J. A. (1989) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820231407 · Cited by 4
Studies on the sorption of lipids in segmented polyurethanes. II. Effect of hard‐segment content
Sreenivasan, K., Jayabalan, M., & Rao, K. V. C. (1992) · Journal of Applied Polymer Science · doi:10.1002/app.1992.070451206 · Cited by 4
In vitro tendon cell colony growth rates on synthetic fibers
Ricci, J. L., Alexander, H., Gona, A. G., & Lelah, M. D. (1990) · Journal of Applied Biomaterials · doi:10.1002/jab.770010202 · Cited by 4
Self-citationInterpolymeric complexes — Biocompatible polymeric materials and the problem of thromboresistance
Zezin, A. B., Él'tsefon, B. S., Rudman, A. R., Vengerova, N. A., Kalyuzhnaya, R. I., Valueva, S. P., Kopylova, E. M., Chepurov, A. K., Efimov, V. S., & Kabanov, V. A. (1987) · Pharmaceutical Chemistry Journal · doi:10.1007/bf00758755 · Cited by 3
Electron Spectroscopy for Chemical Analysis (ESCA)
Bauser, H., & Hellwig, G. E. H. (1993) · Springer eBooks · doi:10.1007/978-94-011-1640-4_18 · Cited by 3
Parfeev, V. M., Grushetskii, I. V., Zimin, N. K., Дробышев, А. А., & Sevast’yanov, V. I. (1985) · Mechanics of Composite Materials · doi:10.1007/bf00611627 · Cited by 3
Yui, N., Kataoka, K., Sakurai, Y., Keitoku, F., Sanui, K., & Ogata, N. (1986) · Die Makromolekulare Chemie · doi:10.1002/macp.1986.021870608 · Cited by 3
Calcification of solvent-extracted glass and mylar-cast biomer films
Adamic, R. J., Fox, J. L., & Tan, L. (1988) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(88)90331-1 · Cited by 3
Biological Properties of Polyurethanes
Padsalgikar, A. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-819673-1.00006-5 · Cited by 3
Preparation and properties of polyamide from amine terminated poly(urethane-urea) oligomers
Al‐Salah, H. A. (1991) · Polymer Bulletin · doi:10.1007/bf00297522 · Cited by 2
Kumar, S. V., Shelke, N. B., Prasannakumar, S., Rokhade, A. P., Sherigara, B. S., & Aminabhavi, T. M. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.29497 · Cited by 1
Synthesis and characterization of biodegradable polyurethanes for biomedical application
Zhang, C. (2008) · TigerPrints (Clemson University) · Cited by 1
Underwater captive bubble technique on curved surfaces of blended polydimethylsiloxanes
Angu, E. A., Cameron, R. C., Pollack, S. K., & Collins, W. E. (1999) · Journal of Adhesion Science and Technology · doi:10.1163/156856199x00893 · Cited by 1
Blood compatibility of poly(ether urethane)–nylon 6 block copolymer
Seo, S. W., & Ha, W. S. (1994) · Polymer International · doi:10.1002/pi.1994.210350207 · Cited by 1
Small Diameter Blood Vessel Prostheses from Polyethers
Bots, J. G., van der Does, L., & Bantjes, A. (1986) · Springer eBooks · doi:10.1007/978-1-4613-1809-5_18 · Cited by 1
Blood material interactions: Ex vivo investigations of polyurethanes
Cooper, S. L., Giroux, T. A., & Grasel, T. G. (1988) · Springer eBooks · doi:10.1007/978-4-431-65964-8_1
“In an air or vacuum environment, the phase with the lower surface-air interfacial energy is expected to be dominant at the surface [7-9], while underwater it is anticipated that the phase with the lower surface-water interfacial energy would be present in excess at the surface.”
BackgroundSelf-citationAspects of the sorption-diffusion processes in segmented polyether urethanes
Razumovskii, L. P., Иорданский, А. Л., Zolotova, Y. V., Trezvova, A. V., Fortunatov, O. G., & Zaikov, G. Y. (1991) · Polymer Science U.S.S.R. · doi:10.1016/0032-3950(91)90156-k
Polishchuk, A. Y., Vladimirov, L. V., Иорданский, А. Л., Zaikov, G. Y., Fortunatov, O. G., Trezvova, A. V., & Il'yakov, Y. V. (1985) · Polymer Science U.S.S.R. · doi:10.1016/0032-3950(85)90298-9
CANINE A-V SERIES SHUNT: RELATIONSHIP TO SURFACE PROPERTIES
Lelah, M. D., Jordan, C. A., Pariso, M. E., Lambrecht, L. K., Albrecht, R. M., & Cooper, S. L. (1984)
Self-citationCombined Dye Adsorption and Hplc for Determination of Hydrophilicity in Polymers
Sreenivasan, K. (1990) · The International Journal of Artificial Organs · doi:10.1177/039139889001301013
“Attempts have been made to correlate hydrophilicity with blood compatibility in a series of in vitro and in vivo investigations (2-5).”
BackgroundQuérette, T. (2018) · theses.fr (ABES) · doi:10.70675/807729cdz926ez4bdbz9523z5de89eefa168
Human Plasma Adsorption to Particulate Arthroplastic Component Materials In Vitro
Kossovsky, N., Feng, D., Millett, D., & Campbell, P. (1992) · doi:10.1520/stp14862s
Metadata
- Authors
- Lelah, M. D., Lambrecht, L. K., Young, B. R., & Cooper, S. L.
- Affiliations
- University of Wisconsin–Madison (US)
- ORCID
- Young, Brian R.
- Venue
- Journal of Biomedical Materials Research
- Publisher
- Wiley
- Published
- 1983-01
- Volume
- 17
- Issue
- 1
- Pages
- 1-22
- ISSN
- 0021-9304 (ISSN-L)
- 1097-4636
- OpenAlex
- W2047719288
- Cited by
- 134
- References
- 24
- Citations by year
- 2023: 1 · 2022: 2 · 2018: 1 · 2017: 1 · 2015: 1 · 2013: 1
- FWCI
- 9.21
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Biomedical Materials Research (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Polymer Surface Interaction Studies
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Keywords
- Biomer, polyurethane, soft segment molecular weight, surface composition, hemocompatibility, arteriovenous shunt, chain extension
- MeSH terms
- Animals, Biocompatible Materials, Blood Platelets, Calorimetry, Differential Scanning, Chemistry, Physical, Dogs, Fibrinogen, Microscopy, Electron, Scanning, Polyurethanes, Spectrophotometry, Infrared, Stress, Mechanical, Surface Properties, Thrombosis, Chemical Phenomena
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.