Physicochemical characterization and in vivo blood tolerability of cast and extruded biomer
The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Abstract
Solution grade and extruded grade Biomer (SB and EB, respectively) are polyurethanes that have been suggested for use in biomedical applications. The bulk materials were examined by elemental analysis, differential scanning calorimetry, thermomechanical testing, and stress‐strain testing. The extruded grade material has a lower soft segment molecular weight (650 g/mol) than the solution grade material (2000 g/mol). As a result of its higher molecular weight, the soft segment phase of SB is semicrystalline in the solid state. The hard segments of the extruded grade material are chain extended with water yielding a lower urea concentration than in the solution grade material in which the hard segments are chain extended with diamines. Chemical structures for the two materials consistent with elemental analysis, urea/urethane ratios and thermal and mechanical data, are proposed. X‐ray photoelectron spectroscopy (ESCA) was used to analyze the surfaces of extruded grade Biomer, solution grade Biomer cast on the inner surface of polyethylene tubing, and extruded grade Biomer dissolved in DMA and similarly cast on polyethylene (CB). Soft segment concentrations were highest on the EB surface and lowest on the SB surface. Soft segment concentrations on the EB surface were higher than on the CB surface, indicating that the method of fabrication affected the composition of the surface layer. The three materials were tested for blood tolerance in a canine femoral arteriovenous shunt configuration. Blood compatibility was correlated with increasing concentration of polyether soft segments on the surface.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Variations in PEU blood compatibility have been observed, with improved thromboresistance correlating to more alkylated soft segments [82], higher soft segment content on the surface [83] and surface treatment, such as grafted sulfonate groups [84,85].”
From Shape-memory polymers as a technology platform for biomedical applications (2010) · cites this paper as [85]
Citations
Cites
Identification and Analysis of Plastics
Haslam, J., & Willis, H. A. (1965) · International Linear Collider · Cited by 220
Dynamic mechanical properties of polyurethane block polymers
Huh, D. S., & Cooper, S. L. (1971) · Polymer Engineering & Science · doi:10.1002/pen.760110504 · Cited by 202
Self-citationA technique for the characterization of hydrophilic solid surfaces
Hamilton, W. C. (1972) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(72)90011-2 · Cited by 200
In vivo evaluation of artificial surfaces with a nonhuman primate model of arterial thrombosis.
Hanson, S. R., Harker, L. A., Ratner, B. D., & Hoffman, A. S. (1980) · PubMed · Cited by 192
Contact angles at the solid—water interface
Andrade, J. D., Ma, S. M., King, R. N., & Gregonis, D. E. (1979) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(79)90350-3 · Cited by 188
Annealing-induced morphological changes in segmented elastomers
Van Bogart, J. W. C., Bluemke, D. A., & Cooper, S. L. (1981) · Polymer · doi:10.1016/0032-3861(81)90250-0 · Cited by 168
Self-citationIdentification and analysis of plastics
Brame, E. G. (1966) · Journal of Colloid and Interface Science · doi:10.1016/0095-8522(66)90093-6 · Cited by 147
Lyman, D. J., Muir, W. M., & Lee, I. J. (1965) · ASAIO Journal · doi:10.1097/00002480-196504000-00056 · Cited by 109
Surface and bulk characteristics of a polyether urethane for artificial hearts
BORETOS, J. W., Pierce, W. S., Baier, R. E., LeRoy, A. F., & Donachy, H. J. (1975) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820090308 · Cited by 89
Segmented polyurethane: A polyether polymer, II. Two years experience
BORETOS, J. W., Detmer, D. E., & Donachy, J. H. (1971) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820050408 · Cited by 87
Research works printed but not linked: 2
- Pierce W. S., 1967, Trans. ASAIO, 13, 299
- Hanson S. R., 1980, In‐vivo evaluation of artificial surfaces with a nonhuman primate model of arterial thrombosis, J. Lab. Clin. Med., 95, 289
Cited by
Polyurethanes in Biomedical Applications
Burke, A., & Hasirci, N. (2004) · Advances in Experimental Medicine and Biology · doi:10.1007/978-0-306-48584-8_7 · Cited by 494
Shape-memory polymers as a technology platform for biomedical applications
Lendlein, A., Behl, M., Hiebl, B., & Wischke, C. (2010) · Expert Review of Medical Devices · doi:10.1586/erd.10.8 · Cited by 469
Shape Memory Materials for Biomedical Applications
El Feninat, F., Laroche, G., Fiset, M., & Mantovani, D. (2002) · Advanced Engineering Materials · doi:10.1002/1527-2648(200203)4:3<91::aid-adem91>3.0.co;2-b · Cited by 458
Selected topics in biomedical polyurethanes. A review
Gogolewski, S. (1989) · Colloid & Polymer Science · doi:10.1007/bf01410115 · Cited by 230
Bouchemal, K., Briançon, S., Perrier, E., Fessi, H., Bonnet, I., & Zydowicz, N. (2004) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2003.09.025 · Cited by 192
Growth of human cells on plasma polymers: Putative role of amine and amide groups
Griesser, H. J., Chatelier, R. C., Gengenbach, T. R., Johnson, G., & Steele, J. G. (1994) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856294x00194 · Cited by 186
Garrett, J. T., Xu, R., Cho, J., & Runt, J. (2003) · Polymer · doi:10.1016/s0032-3861(03)00165-4 · Cited by 183
Protein adsorption on polymeric biomaterials I. Adsorption isotherms
Young, B. R., Pitt, W. G., & Cooper, S. L. (1988) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(88)90321-9 · Cited by 180
Self-citationBiodegradation of a polyurethane in vitro
Phua, S. K., Castillo, E., Anderson, J. M., & Hiltner, A. (1987) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820210207 · Cited by 172
Platelet shape change and cytoskeletal reorganization on polyurethaneureas
Goodman, S. L., Grasel, T. G., Cooper, S. L., & Albrecht, R. M. (1989) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820230109 · Cited by 155
Self-citationAnalysis of in vitro enzymatic and oxidative degradation of polyurethanes
Ratner, B. D., Gladhill, K. W., & Horbett, T. A. (1988) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820220607 · Cited by 136
Surface characterization of biomaterials by electron spectroscopy for chemical analysis
Ratner, B. D. (1983) · Annals of Biomedical Engineering · doi:10.1007/bf02363290 · Cited by 128
SIMS and XPS studies of polyurethane surfaces 2. Polyurethanes with fluorinated chain extenders
Hearn, M. J., Briggs, D., Yoon, S. C., & Ratner, B. D. (1987) · Surface and Interface Analysis · doi:10.1002/sia.740100803 · Cited by 128
Evaluation of explanted polyurethane trileaflet cardiac valve prostheses
Hilbert, S. L., Ferrans, V. J., Tornita, Y., Eidbo, E. E., & Jones, M. (1987) · Journal of Thoracic and Cardiovascular Surgery · doi:10.1016/s0022-5223(19)36257-9 · Cited by 126
Takahara, A., Tashita, J., Kajiyama, T., Takayanagi, M., & MacKnight, W. J. (1985) · Polymer · doi:10.1016/0032-3861(85)90218-6 · Cited by 125
Haycox, C. L., & Ratner, B. D. (1993) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820270909 · Cited by 125
Surface properties and blood compatibility of polyurethaneureas
Grasel, T. G., & Cooper, S. L. (1986) · Biomaterials · doi:10.1016/0142-9612(86)90002-5 · Cited by 122
Self-citationGrasel, T. G., Pierce, J. A., & Cooper, S. L. (1987) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820210702 · Cited by 120
Self-citationZhang, C., Wen, X., Vyavahare, N. R., & Boland, T. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.06.009 · Cited by 110
“Platelet adhesion on materials is a complicated phenomenon including protein adsorption, protein deformation and reaction, and therefore protein adsorption is thought to regulate all the subsequent blood–material interactions [43].”
BackgroundPreparation of polyurethane microcapsules with different soft segments and their characteristics
Hong, K., & Park, S. (1999) · Reactive and Functional Polymers · doi:10.1016/s1381-5148(98)00068-6 · Cited by 94
Ex vivo interactions and surface property relationships of polyetherurethanes
Lelah, M. D., Grasel, T. G., Pierce, J. A., & Cooper, S. L. (1986) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820200403 · Cited by 90
Self-citationRatner, B. D., Johnston, A. B., & Lenk, T. J. (1987) · Journal of Biomedical Materials Research · doi:10.1002/j.1097-4636.1987.tb00005.x · Cited by 91
Takahara, A., Hergenrother, R. W., Coury, A. J., & Cooper, S. L. (1992) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820260609 · Cited by 86
Self-citationA canine ex vivo series shunt for evaluating thrombus deposition on polymer surfaces
Lelah, M. D., Lambrecht, L. K., & Cooper, S. L. (1984) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820180503 · Cited by 86
Self-citationPolyether—urethane ionomers: surface property/ex vivo blood compatibility relationships
Lelah, M. D., Pierce, J. A., Lambrecht, L. K., & Cooper, S. L. (1985) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(85)90051-7 · Cited by 85
Self-citationDegradation of polyurethanes in biomedical applications—A review
Griesser, H. J. (1991) · Polymer Degradation and Stability · doi:10.1016/0141-3910(91)90080-b · Cited by 84
Chen, K., Kuo, J., & Chen, C. (2000) · Biomaterials · doi:10.1016/s0142-9612(99)00144-1 · Cited by 78
“[30] indicated that material having a higher surface soft segment concentration was more thromboresistant.”
BackgroundPolyurethane Shape‐Memory Polymers Demonstrate Functional Biocompatibility In Vitro
Cabanlit, M., Maitland, D., Wilson, T., Simon, S., Wun, T., Gershwin, M. E., & Van de Water, J. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200600177 · Cited by 69
Synthesis and characterization of SPUU–PEO–heparin graft copolymers
Park, K. D., Piao, A. Z., Jacobs, H., Okano, T., & Kim, S. W. (1991) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1991.080291206 · Cited by 66
Gretzer, C., Gisselfält, K., Liljensten, E., Rydén, L., & Thomsen, P. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00097-8 · Cited by 72
Bélanger, M., Marois, Y., Roy, R., Mehri, Y., Wagner, É., Zhang, Z., King, M. W., Yang, M., Hahn, C., & Guidoin, R. (2000) · Artificial Organs · doi:10.1046/j.1525-1594.2000.06504.x · Cited by 64
Takahara, A., Tashita, J., Kajiyama, T., & Takayanagi, M. (1985) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820190104 · Cited by 62
Chinn, J. A., Posso, S. E., Horbett, T. A., & Ratner, B. D. (1991) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820250410 · Cited by 62
Chinn, J. A., Posso, S. E., Horbett, T. A., & Ratner, B. D. (1992) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820260606 · Cited by 61
Lambrecht, L. K., Young, B. R., Stafford, R. E., Park, K., Albrecht, R. M., Mosher, D. F., & Cooper, S. L. (1986) · Thrombosis Research · doi:10.1016/0049-3848(86)90283-5 · Cited by 61
Self-citationPhysical and blood contacting characteristics of propyl sulphonate grafted Biomer
Okkema, A. Z., Yu, X.-H., & Cooper, S. L. (1991) · Biomaterials · doi:10.1016/0142-9612(91)90123-r · Cited by 57
Self-citationSynthesis and Modifications of Polyurethanes for Biomedical Purposes
Hasırcı, N., & Aksoy, E. A. (2007) · High Performance Polymers · doi:10.1177/0954008307081203 · Cited by 62
“[2] reported that materials having higher surface soft segment concentration were more thromboresistant, and Hanson et al.”
BackgroundTakahara, A., Okkema, A. Z., Wabers, H. D., & Cooper, S. L. (1991) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820250905 · Cited by 51
Self-citationPreparation of polyurethane nanocapsules by miniemulsion polyaddition
Johnsen, H., & Schmid, R. (2007) · Journal of Microencapsulation · doi:10.1080/02652040701585179 · Cited by 47
“Polyurethane is a popular biomaterial applied for medical devices, known to have excellent blood compatibility and to undergo gradual biodegradation in the human body (Lelah et al. 1983; Chandra and Rustgi 1998; Santerre et al. 2005).”
BackgroundMarchant, R. E., Anderson, J. M., Phua, K., & Hiltner, A. (1984) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820180307 · Cited by 47
Fodor, C., Domján, A., & Iván, B. (2013) · Polymer Chemistry · doi:10.1039/c3py00299c · Cited by 45
Platelets and cardiopulmonary bypass
Hyde, J., Chinn, J. A., & Graham, T. R. (1998) · Perfusion · doi:10.1177/026765919801300603 · Cited by 50
Menconi, M. J., Pockwinse, S. M., Owen, T. A., Dasse, K. A., Stein, G. S., & Lian, J. B. (1995) · Journal of Cellular Biochemistry · doi:10.1002/jcb.240570320 · Cited by 45
The measurement of contact angles on circular tubing surfaces using the captive bubble technique
Lelah, M. D., Grasel, T. G., Pierce, J. A., & Cooper, S. L. (1985) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820190913 · Cited by 43
Self-citationCompliance effects on small diameter polyurethane graft patency
Uchida, N., KAMBIC, H. E., Emoto, H., Chen, J., Hsu, S., Murabayshi, S., Harasaki, H., & Nosé, Y. (1993) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820271007 · Cited by 41
Albumin Adsorption and Retention on C18‐Alkyl‐Derivatized Polyurethane Vascular Grafts
Eberhart, R. C., MUNRO, M. S., Williams, G., Kulkarni, P. V., Shannon, W. A., Brink, B. E., & Fry, W. J. (1987) · Artificial Organs · doi:10.1111/j.1525-1594.1987.tb00948.x · Cited by 39
Small diameter blood vessel prostheses from blends of polyethylene oxide and polypropylene oxide
Bots, J. G., van der Does, L., & Bantjes, A. (1986) · Biomaterials · doi:10.1016/0142-9612(86)90011-6 · Cited by 39
Brunstedt, M. R., Ziats, N. P., Schubert, M., Hiltner, P. A., Anderson, J. M., Lodoen, G. A., & Payet, C. R. (1993) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820270216 · Cited by 38
Liu, L., Ito, Y., & Imanishi, Y. (1991) · Biomaterials · doi:10.1016/0142-9612(91)90007-w · Cited by 37
FTIR-ATR studies of the effect of shear rate upon albumin adsorption onto polyurethaneurea
Pitt, W. G., & Cooper, S. L. (1986) · Biomaterials · doi:10.1016/0142-9612(86)90004-9 · Cited by 36
Self-citationSegmented biopolyurethanes for medical applications
Macocinschi, D., Filip, D., Vlad, S., Cristea, M., & Butnaru, M. (2009) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-009-3731-3 · Cited by 35
“hard segment of polyurethane were highly thrombogenic in platelet retention experiments [ 14 ].”
BackgroundDegradation of five polyurethane gastric bubbles following in vivo use: SEC, ATR-IR and DSC studies
Dillon, J. G., & Hughes, M. (1992) · Biomaterials · doi:10.1016/0142-9612(92)90191-p · Cited by 35
The evolution of polyurethane heart valve replacements: How chemistry translates to the clinic
Crago, M., Lee, A., Farajikhah, S., Oveissi, F., Fletcher, D. F., Dehghani, F., Winlaw, D. S., & Naficy, S. (2022) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.104916 · Cited by 36
Physicochemical characterization of a hydrophilic microporous polyurethane vascular graft
Martz, H., Beaudoin, G., Paynter, R. W., King, M. W., Marceau, D., & Guidoin, R. (1987) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820210311 · Cited by 33
The effects of an enhanced inflammatory reaction on the surface properties of cast biomer
Marchant, R. E., Anderson, J. M., Castillo, E. J., & Hiltner, A. (1986) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820200205 · Cited by 33
In vivo leucocyte interactions on Pellethane® surfaces
Brunstedt, M. R., Anderson, J. M., Spilizewski, K. L., Marchant, R. E., & Hiltner, A. (1990) · Biomaterials · doi:10.1016/0142-9612(90)90089-9 · Cited by 32
The biocompatibility of solution cast and acetone‐extracted cast biomer
Marchant, R. E., Anderson, J., Hiltner, A., Castillo, E. J., Gleit, J., & Ratner, B. D. (1986) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820200611 · Cited by 30
Biocompatibility: Bioengineering Aspects
Murabayashi, S., & Nosé, Y. (1986) · Artificial Organs · doi:10.1111/j.1525-1594.1986.tb02529.x · Cited by 28
Paynter, R. W., Martz, H., & Guidoin, R. (1987) · Biomaterials · doi:10.1016/0142-9612(87)90096-2 · Cited by 27
Morphology and Properties of Segmented Polyether Poly(urethane-urea-amide)
Yui, N., Nojima, K., Sanui, K., & Ogata, N. (1985) · Polymer Journal · doi:10.1295/polymj.17.969 · Cited by 27
Knutson, K., & Lyman, D. J. (1985) · Springer eBooks · doi:10.1007/978-1-4684-8610-0_6 · Cited by 26
In vivo evaluation of hydrophobic and fibrillar microporous polyetherurethane urea graft
Marois, Y., Guidoin, R., Boyer, D., Assayed, F., Doillon, C. J., Paynter, R. W., & Marois, M. (1989) · Biomaterials · doi:10.1016/0142-9612(89)90057-4 · Cited by 24
Series shunt evaluation of polyurethane vascular graft materials in chronically AV‐shunted canines
McCoy, T. J., Wabers, H. D., & Cooper, S. L. (1990) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820240110 · Cited by 23
Self-citationSurface structure of polymers for biomedical applications
Ratner, B. D. (1988) · Makromolekulare Chemie Macromolecular Symposia · doi:10.1002/masy.19880190113 · Cited by 23
Dawlee, S., & Jayabalan, M. (2011) · Biomedical Materials · doi:10.1088/1748-6041/6/5/055002 · Cited by 22
Characterization of ovalbumin-containing polyurethane microcapsules with different structures
Hong, K., & Park, S. (2000) · Polymer Testing · doi:10.1016/s0142-9418(99)00070-7 · Cited by 21
Yui, N., Kataoka, K., Sakurai, Y., Sanui, K., Ogata, N., Takahara, A., & Kajiyama, T. (1986) · Die Makromolekulare Chemie · doi:10.1002/macp.1986.021870423 · Cited by 21
Spectroscopic techniques for the analysis of polymer surfaces and interfaces
Garbassi, F., & Occhiello, E. (1987) · Analytica Chimica Acta · doi:10.1016/s0003-2670(00)84710-8 · Cited by 21
Heparinization of Medical Grade Polyurethanes
Eloy, R., Belleville, J., Rissoan, M., & Baguet, J. (1987) · Journal of Biomaterials Applications · doi:10.1177/088532828700200401 · Cited by 20
“(a) The more hydrophilic materials exhibit a more favorable blood response than the more hydrophobic polymers [33-38].”
BackgroundRehman, I. U. (1996) · Journal of Biomaterials Applications · doi:10.1177/088532829601100203 · Cited by 20
Graft Copolymer and Block Copolymer Surfaces
Ratner, B. D. (1985) · Springer eBooks · doi:10.1007/978-1-4684-8610-0_10 · Cited by 18
Nojima, K., Sanui, K., Ogata, N., Yui, N., Kataoka, K., & Sakurai, Y. (1987) · Polymer · doi:10.1016/0032-3861(87)90179-0 · Cited by 18
Grasel, T. G., Pitt, W. G., Murthy, K. D., McCoy, T. J., & Cooper, S. L. (1987) · Biomaterials · doi:10.1016/0142-9612(87)90002-0 · Cited by 18
Self-citationGrasel, T. G., Lee, D. C., Okkema, A. Z., Slowinski, T. J., & Cooper, S. L. (1988) · Biomaterials · doi:10.1016/0142-9612(88)90001-4 · Cited by 17
Self-citationPrednisolone release from copolyurethane monolithic devices
Sharma, K., Knutson, K., & Kirn, S. W. (1988) · Journal of Controlled Release · doi:10.1016/0168-3659(88)90052-1 · Cited by 17
Mn-porphyrin derivatives as an antioxidant for medical devices
Ohse, T., Kawakami, H., Morita, A., & Nagaoka, S. (1999) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856299x00531 · Cited by 17
Lim, F., Xuehai, Y., & Cooper, S. L. (1993) · Biomaterials · doi:10.1016/0142-9612(93)90243-u · Cited by 17
Self-citationESCA studies of cross-linked poly(ethylene oxide)/polysiloxane networks
Chaikof, E. L., & Merrill, E. W. (1990) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(90)90410-p · Cited by 16
Compositional analysis of biomer
Belisle, J., Maier, S. K., & Tucker, J. A. (1990) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820241204 · Cited by 16
In vivo evaluation of protein adsorption to sterically stabilised colloidal carriers
Norman, M. E., Williams, P. M., & Illum, L. (1993) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820270704 · Cited by 15
Platelet deposition onto polymeric surfaces during shunting
Fujimoto, K., Minato, M., Tadokoro, H., & Ikada, Y. (1993) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820270307 · Cited by 14
Measurement of advancing and receding contact angles inside polymer tubing
Pitt, W. G., Young, B. R., & Copper, S. L. (1987) · Colloids and Surfaces · doi:10.1016/0166-6622(87)80156-7 · Cited by 13
Self-citationMcComb, M. E., Oleschuk, R. D., Chow, A., Perreault, H., Dworschak, R. G., Znamirowski, M., Ens, W., Standing, K. G., & Preston, K. R. (2001) · Canadian Journal of Chemistry · doi:10.1139/cjc-79-4-437 · Cited by 13
Biostability and blood-contacting properties of sulfonate grafted polyurethane and Biomer
Wabers, H. D., McCoy, T. J., Okkema, A. Z., Hergenrother, R. W., Wolf, M. F., & Cooper, S. L. (1993) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856292x00349 · Cited by 12
Self-citationMethods of Assessment of Thrombosis ex Vivoa
Cooper, S. L., FABRIZIUS, D. J., & Grasel, T. G. (1987) · Annals of the New York Academy of Sciences · doi:10.1111/j.1749-6632.1987.tb33074.x · Cited by 12
Self-citationA Novel Polyurethane Film for Biomedical Use
Hasırcı, N., & Burke, A. D. (1987) · Journal of Bioactive and Compatible Polymers · doi:10.1177/088391158700200203 · Cited by 12
Thrombus deposition on polyurethanes designed for biomedical applications
Wabers, H. D., Hergenrother, R. W., Coury, A. J., & Cooper, S. L. (1992) · Journal of Applied Biomaterials · doi:10.1002/jab.770030302 · Cited by 10
Self-citationEffects of a polymeric additive in a biomedical poly(ether urethaneurea)
Freij‐Larsson, C., Kober, M., Wesslén, B., Willquist, E., & Tengvall, P. (1993) · Journal of Applied Polymer Science · doi:10.1002/app.1993.070490507 · Cited by 10
An XPS and SEM Study of Polyurethane Surfaces: Experimental Considerations
Paynter, R. W., Ratner, B. D., & Thomas, H. R. (1984) · Springer eBooks · doi:10.1007/978-1-4613-2433-1_9 · Cited by 10
Preparation of hydrophilic polymer networks by post‐curing reaction
Andreopoulos, A. G. (1992) · Journal of Applied Polymer Science · doi:10.1002/app.1992.070450609 · Cited by 8
Protein adsorption characteristics of plasma treated polyurethane surfaces
Sterrett, T., Sachdeva, R., & Jerabek, P. (1992) · Journal of Materials Science Materials in Medicine · doi:10.1007/bf00701235 · Cited by 8
Surface Contamination and Biomaterials
Ratner, B. D. (1987) · Springer eBooks · doi:10.1007/978-1-4684-9126-5_11 · Cited by 8
Shelke, N. B., & Aminabhavi, T. M. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.25822 · Cited by 8
Lelah, M. D., Jordan, C. A., Pariso, M. E., Lambrecht, L. K., Albrecht, R. M., & Cooper, S. L. (1984) · Springer eBooks · doi:10.1007/978-1-4613-2433-1_18 · Cited by 7
Self-citationTakahara, A., Takamori, K., & Kajiyama, T. (1988) · Springer eBooks · doi:10.1007/978-4-431-65964-8_3 · Cited by 7
Biocompatibility of shape-memory polymers for biomedical applications
Mbeh, D. A., & do Nascimento, R. O. (2015) · Elsevier eBooks · doi:10.1016/b978-0-85709-698-2.00005-2 · Cited by 8
Model Polymers for Probing Surface and Interfacial Phenomena
GREGONIS, D. E., & Andrade, J. D. (1985) · Springer eBooks · doi:10.1007/978-1-4684-8610-0_3 · Cited by 6
Titanium-induced enzyme activation on murine peritoneal macrophages in primary culture
Elagli, K., Vérnon, C., & Hildebrand, H. F. (1995) · Biomaterials · doi:10.1016/0142-9612(95)91051-y · Cited by 6
Recent advances in thromboresistant materials
Yui, N., Kataoka, K., & Sakurai, Y. (1987) · Springer eBooks · doi:10.1007/978-94-009-3361-3_19 · Cited by 6
Recent Development in Polyurethanes for Biomedical Applications
Ghosh, A., Orasugh, J. T., Ray, S. S., & Chattopadhayay, D. (2023) · ACS symposium series · doi:10.1021/bk-2023-1454.ch008 · Cited by 6
Metadata
- Authors
- Lelah, M. D., Lambrecht, L. K., Young, B. R., & Cooper, S. L.
- Affiliations
- University of Wisconsin–Madison (US)
- ORCID
- Young, Brian R.
- Venue
- Journal of Biomedical Materials Research
- Publisher
- Wiley
- Published
- 1983-01
- Volume
- 17
- Issue
- 1
- Pages
- 1-22
- ISSN
- 0021-9304 (ISSN-L)
- 1097-4636
- OpenAlex
- W2047719288
- Cited by
- 134
- References
- 24
- Citations by year
- 2023: 1 · 2022: 2 · 2018: 1 · 2017: 1 · 2015: 1 · 2013: 1
- FWCI
- 9.21
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Biomedical Materials Research (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Polymer Surface Interaction Studies
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Keywords
- Biomer, polyurethane, soft segment molecular weight, surface composition, hemocompatibility, arteriovenous shunt, chain extension
- MeSH terms
- Animals, Biocompatible Materials, Blood Platelets, Calorimetry, Differential Scanning, Chemistry, Physical, Dogs, Fibrinogen, Microscopy, Electron, Scanning, Polyurethanes, Spectrophotometry, Infrared, Stress, Mechanical, Surface Properties, Thrombosis, Chemical Phenomena
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.