The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
The role of hydrated silica, titania, and alumina in inducing apatite on implants
Abstract
Pure soluble silica prepared by a sol‐gel method induced bone‐like hydroxyapatite formation onto its surface when the silica was immersed in a simulated body fluid (SBF), whereas silica glass and quartz did not. This finding directly supports the hypothesis that hydrated silica plays an important role in biologically active hydroxyapatite formation on the surfaces of bioactive glasses and glass‐ceramics, which leads to bone‐bonding. Gel‐derived titania is also a hydroxyapatite inducer because of its abundant TiOH groups. These results provide further insight into the unique osseointegration of titanium and its alloys. It is suspected that gel‐derived titania develops an apatite layer by taking calcium and phosphate from the body fluid, thus producing bonebonding. Although sufficient AlOH groups may remain in the alumina gel, they do not serve to initiate apatite generation when immersed in SBF. This phenomenon explains the fact that an intermediate fibrous tissue is usually found to separate the alumina implant from bone. One may infer that both abundant OH groups and negatively charged surfaces of gel‐derived silica and titania are important for hydroxyapatite induction. Material which possesses and / or develops both a negatively charged surface and abundant OH groups in a physiologically‐related fluid is most likely to be an efficient apatite inducer. Such materials are suitable candidates to serve as bone‐bonding biomaterials. © 1994 John Wiley & Sons, Inc.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Iler, K. (1979) · Medical Entomology and Zoology · Cited by 5,030
Bioceramics: From Concept to Clinic
Hench, L. L. (1991) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1991.tb07132.x · Cited by 4,977
Solutions able to reproduce in vivo surface‐structure changes in bioactive glass‐ceramic A‐W3
Kokubo, T., Kushitani, H., Sakka, S., Kitsugi, T., & Yamamuro, T. (1990) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820240607 · Cited by 3,836
Self-citationThe Isoelectric Points of Solid Oxides, Solid Hydroxides, and Aqueous Hydroxo Complex Systems
Parks, G. A. (1965) · Chemical Reviews · doi:10.1021/cr60234a002 · Cited by 3,430
Osseointegration and its experimental background
Branemark, P.-I. (1983) · The Journal of Prosthetic Dentistry · doi:10.1016/s0022-3913(83)80101-2 · Cited by 2,084
Bioactive glass ceramics: properties and applications
Kokubo, T. (1991) · Biomaterials · doi:10.1016/0142-9612(91)90194-f · Cited by 1,202
Self-citationHench, L. L., & Wilson, J. (1984) · Science · doi:10.1126/science.6093253 · Cited by 982
Ca, P‐rich layer formed on high‐strength bioactive glass‐ceramic A‐W
Kokubo, T., Ito, S., Huang, Z. T., Hayashi, T., Sakka, S., Kitsugi, T., & Yamamuro, T. (1990) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820240306 · Cited by 859
Self-citationSurface chemistry of bioactive glass-ceramics
Kokubo, T. (1990) · Journal of Non-Crystalline Solids · doi:10.1016/0022-3093(90)90199-v · Cited by 676
Self-citationApatite Formation Induced by Silica Gel in a Simulated Body Fluid
Li, P., Ohtsuki, C., Kokubo, T., Nakanishi, K., Soga, N., Nakamura, T., & Yamamuro, T. (1992) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1992.tb04470.x · Cited by 517
Self-citation
Cited by
How useful is SBF in predicting in vivo bone bioactivity?
Kokubo, T., & Takadama, H. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.017 · Cited by 9,576
Self-citationBiodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering
Rezwan, K., Chen, Q. Z., Blaker, J. J., & Boccaccini, A. R. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.039 · Cited by 3,839
Novel bioactive materials with different mechanical properties
Kokubo, T., Kim, H.-M., & Kawashita, M. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00044-9 · Cited by 1,914
Self-citationNavarro, M., Michiardi, A., Castaño, O., & Planell, J. A. (2008) · Journal of The Royal Society Interface · doi:10.1098/rsif.2008.0151 · Cited by 1,513
Bioactive ceramics: the effect of surface reactivity on bone formation and bone cell function
Ducheyne, P., & Qiu, Q. (1999) · Biomaterials · doi:10.1016/s0142-9612(99)00181-7 · Cited by 1,133
Biomimetic Systems for Hydroxyapatite Mineralization Inspired By Bone and Enamel
Palmer, L. C., Newcomb, C. J., Kaltz, S. R., Spoerke, E. D., & Stupp, S. I. (2008) · Chemical Reviews · doi:10.1021/cr8004422 · Cited by 1,090
Titanium Dioxide Crystals with Tailored Facets
Liu, G., Yang, H. G., Pan, J., Yang, Y. Q., Lu, G. Q. (., & Cheng, H.-M. (2014) · Chemical Reviews · doi:10.1021/cr400621z · Cited by 1,084
High surface energy enhances cell response to titanium substrate microstructure
Zhao, G., Schwartz, Z., Wieland, M., Rupp, F., Geis‐Gerstorfer, J., Cochran, D. L., & Boyan, B. D. (2005) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30320 · Cited by 922
Engineering biocompatible implant surfaces
Bauer, S., Schmuki, P., von der Mark, K., & Park, J. (2013) · Progress in Materials Science · doi:10.1016/j.pmatsci.2012.09.001 · Cited by 780
Preparation of bioactive titanium metal via anodic oxidation treatment
Yang, B., Uchida, M., Kim, H.-M., Zhang, X., & Kokubo, T. (2004) · Biomaterials · doi:10.1016/s0142-9612(03)00626-4 · Cited by 730
Self-citationA unified in vitro evaluation for apatite-forming ability of bioactive glasses and their variants
Maçon, A. L. B., Kim, T. B., Valliant, E. M., Goetschius, K., Brow, R. K., Day, D. E., Hoppe, A., Boccaccini, A. R., Kim, I. Y., Ohtsuki, C., et al. (2015) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-015-5403-9 · Cited by 489
Self-citationBiomimetic apatite formation on chemically treated titanium
Jonášová, L., Müller, F. A., Helebrant, A., Strnad, J., & Greil, P. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.08.009 · Cited by 474
Bioinorganics and biomaterials: Bone repair
Habibovic, P., & Barralet, J. E. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.03.027 · Cited by 441
Bioactive sol‐gel foams for tissue repair
Sepulveda, P., Jones, J. R., & Hench, L. L. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.1250 · Cited by 441
Kim, H.-M., Himeno, T., Kokubo, T., & Nakamura, T. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.022 · Cited by 425
Self-citationBiomaterials for Bone Regenerative Engineering
Yu, X., Tang, X., Gohil, S. V., & Laurencin, C. T. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201400760 · Cited by 418
Effect of heat treatment on apatite-forming ability of Ti metal induced by alkali treatment
KIM, H. M., MIYAJI, F., KOKUBO, T., & NAKAMURA, T. (1997) · Journal of Materials Science: Materials in Medicine · doi:10.1023/a:1018524731409 · Cited by 414
Self-citationBiomimetic apatite coatings on micro-arc oxidized titania
Song, W.-H., Jun, Y.-K., Han, Y., & Hong, S.-H. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.09.103 · Cited by 407
Teeth and bones: applications of surface science to dental materials and related biomaterials
Jones, F. (2001) · Surface Science Reports · doi:10.1016/s0167-5729(00)00011-x · Cited by 399
The in-vitro bioactivity of mesoporous bioactive glasses
Yan, X., Huang, X., Yu, C., Deng, H., Wang, Y., Zhang, Z., Qiao, S., Lu, G., & Zhao, D. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.043 · Cited by 355
Roohani-Esfahani, S.-I., Nouri-Khorasani, S., Lu, Z., Appleyard, R., & Zreiqat, H. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.03.058 · Cited by 342
Surface modifications and cell–materials interactions with anodized Ti
DAS, K., BOSE, S., & BANDYOPADHYAY, A. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2006.12.003 · Cited by 324
Synthesis and characterization of hydroxyapatite–bacterial cellulose nanocomposites
WAN, Y., HONG, L., JIA, S., HUANG, Y., ZHU, Y., WANG, Y., & JIANG, H. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.11.027 · Cited by 303
Advanced biomaterials for skeletal tissue regeneration: Instructive and smart functions
Barrère, F., Mahmood, T. A., de Groot, K., & van Blitterswijk, C. A. (2008) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2007.12.001 · Cited by 303
Self-citationCalcium orthophosphate deposits: Preparation, properties and biomedical applications
Dorozhkin, S. V. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.05.033 · Cited by 298
Hydroxyapatite growth on anodic TiO2 nanotubes
Tsuchiya, H., Macak, J. M., Müller, L., Kunze, J., Müller, F., Greil, P., Virtanen, S., & Schmuki, P. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30677 · Cited by 291
Toworfe, G. K., Composto, R. J., Shapiro, I. M., & Ducheyne, P. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.06.017 · Cited by 287
Surface nano-functionalization of biomaterials
Liu, X., Chu, P. K., & Ding, C. (2010) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2010.06.013 · Cited by 276
Thakur, N., Thakur, N., Kumar, A., Thakur, V. K., Kalia, S., Arya, V., Kumar, A., Kumar, S., & Kyzas, G. Z. (2024) · Science of The Total Environment · doi:10.1016/j.scitotenv.2023.169815 · Cited by 272
RetractedKim, H.-M., Himeno, T., Kawashita, M., Kokubo, T., & Nakamura, T. (2004) · Journal of The Royal Society Interface · doi:10.1098/rsif.2004.0003 · Cited by 266
Self-citationBaino, F., & Yamaguchi, S. (2020) · Biomimetics · doi:10.3390/biomimetics5040057 · Cited by 264
Hu, Y., Zhu, Y., Zhou, X., Ruan, C., Pan, H., & Catchmark, J. M. (2016) · Journal of Materials Chemistry B · doi:10.1039/c5tb02091c · Cited by 56
Metadata
- Authors
- Li, P., Ohtsuki, C., Kokubo, T., Nakanishi, K., Soga, N., & de Groot, K.
- Venue
- Journal of Biomedical Materials Research
- Publisher
- Wiley
- Published
- 1994-01
- Volume
- 28
- Issue
- 1
- Pages
- 7-15
- ISSN
- 0021-9304 (ISSN-L)
- 1097-4636
- OpenAlex
- W2028697362
- Cited by
- 735
- References
- 21
- FWCI
- 13.28
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.