The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Poly‐ϵ‐caprolactone/hydroxyapatite composites for bone regeneration: In vitro characterization and human osteoblast response
Abstract
Polycaprolactone (PCL), a semicrystalline linear resorbable aliphatic polyester, is a good candidate as a scaffold for bone tissue engineering, due to its biocompatibility and biodegradability. However, the poor mechanical properties of PCL impair its use as scaffold for hard tissue regeneration, unless mechanical reinforcement is provided. To enhance mechanical properties and promote osteoconductivity, hydroxyapatite (HA) particles were added to the PCL matrix: three PCL‐based composites with different volume ratio of HA (13%, 20%, and 32%) were studied. Mechanical properties and structure were analysed, along with biocompatibility and osteoconductivity. The addition of HA particles (in particular in the range of 20% and 32%) led to a significant improvement in mechanical performance (e.g., elastic modulus) of scaffold. Saos‐2 cells and osteoblasts from human trabecular bone (hOB) retrieved during total hip replacement surgery were seeded onto 3D PCL samples for 1–4 weeks. Following the assessment of cell viability, proliferation, morphology, and ALP release, HA‐loaded PCL was found to improve osteoconduction compared to the PCL alone. The results indicated that PCL represents a potential candidate as an efficient substrate for bone substitution through an accurate balance between structural/ mechanical properties of polymer and biological activities. © 2005 Wiley Periodicals, Inc. J Biomed Mater Res, 2006
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Langer, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893
Biopolymers: overview of several properties and consequences on their applications
Van de Velde, K., & Kiekens, P. (2002) · Polymer Testing · doi:10.1016/s0142-9418(01)00107-6 · Cited by 887
Cited by
Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering
Rezwan, K., Chen, Q. Z., Blaker, J. J., & Boccaccini, A. R. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.039 · Cited by 3,839
Stem cell-based tissue engineering with silk biomaterials
Wang, Y., Kim, H.-J., Vunjak-Novakovic, G., & Kaplan, D. L. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.07.008 · Cited by 968
Medical applications of membranes: Drug delivery, artificial organs and tissue engineering
Stamatialis, D. F., Papenburg, B. J., Gironés, M., Saiful, S., Bettahalli, S. N. M., Schmitmeier, S., & Wessling, M. (2008) · Journal of Membrane Science · doi:10.1016/j.memsci.2007.09.059 · Cited by 473
Electrospun nanostructured scaffolds for bone tissue engineering
Prabhakaran, M. P., Venugopal, J., & Ramakrishna, S. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.05.007 · Cited by 430
A Review on Properties and Application of Bio-Based Poly(Butylene Succinate)
Rafiqah, S. A., Khalina, A., Harmaen, A. S., Tawakkal, I. A., Zaman, K., Asim, M., Nurrazi, M. N., & Lee, C. H. (2021) · Polymers · doi:10.3390/polym13091436 · Cited by 398
Bioactive composite materials for tissue engineering scaffolds
Boccaccini, A. R., & Blaker, J. J. (2005) · Expert Review of Medical Devices · doi:10.1586/17434440.2.3.303 · Cited by 347
Calcium orthophosphate-based biocomposites and hybrid biomaterials
Dorozhkin, S. V. (2009) · Journal of Materials Science · doi:10.1007/s10853-008-3124-x · Cited by 300
Roosa, S. M. M., Kemppainen, J. M., Moffitt, E. N., Krebsbach, P. H., & Hollister, S. J. (2010) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32381 · Cited by 283
Hajiali, F., Tajbakhsh, S., & Shojaei, A. (2018) · Polymer Reviews · doi:10.1080/15583724.2017.1332640 · Cited by 267
A multi-functional scaffold for tissue regeneration: The need to engineer a tissue analogue
Causa, F., Netti, P. A., & Ambrosio, L. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.07.030 · Cited by 266
Self-citationLahiri, D., Rouzaud, F., Richard, T., Keshri, A. K., Bakshi, S. R., Kos, L., & Agarwal, A. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.02.044 · Cited by 256
Santiago, L. Y., Nowak, R. W., Peter Rubin, J., & Marra, K. G. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.011 · Cited by 253
Synthesis of two-component injectable polyurethanes for bone tissue engineering
Bonzani, I. C., Adhikari, R., Houshyar, S., Mayadunne, R., Gunatillake, P., & Stevens, M. M. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.08.026 · Cited by 159
Review of Hybrid Materials Based on Polyhydroxyalkanoates for Tissue Engineering Applications
Pryadko, A., Surmeneva, M. A., & Surmenev, R. A. (2021) · Polymers · doi:10.3390/polym13111738 · Cited by 102
Kouhi, M., Fathi, M., Prabhakaran, M. P., Shamanian, M., & Ramakrishna, S. (2018) · Materials Today: Proceedings · doi:10.1016/j.matpr.2018.04.181 · Cited by 25
Metadata
- Authors
- Causa, F., Netti, P. A., Ambrosio, L., Ciapetti, G., Baldini, N., Pagani, S., Martini, D., & Giunti, A.
- Venue
- Journal of Biomedical Materials Research Part A
- Publisher
- Wiley
- Published
- 2005-10-28
- Volume
- 76A
- Issue
- 1
- Pages
- 151-162
- ISSN
- 1549-3296 (ISSN-L)
- 1552-4965
- OpenAlex
- W1993447012
- Cited by
- 241
- References
- 2
- FWCI
- 8.67
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.