The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Biomechanical evaluation of the interfacial strength of a chemically modified sandblasted and acid‐etched titanium surface
Abstract
The functional capacity of osseointegrated dental implants to bear load is largely dependent on the quality of the interface between the bone and implant. Sandblasted and acid‐etched (SLA) surfaces have been previously shown to enhance bone apposition. In this study, the SLA has been compared with a chemically modified SLA (modSLA) surface. The increased wettability of the modSLA surface in a protein solution was verified by dynamic contact angle analysis. Using a well‐established animal model with a split‐mouth experimental design, implant removal torque testing was performed to determine the biomechanical properties of the bone–implant interface. All implants had an identical cylindrical shape with a standard thread configuration. Removal torque testing was performed after 2, 4, and 8 weeks of bone healing (n = 9 animals per healing period, three implants per surface type per animal) to evaluate the interfacial shear strength of each surface type. Results showed that the modSLA surface was more effective in enhancing the interfacial shear strength of implants in comparison with the conventional SLA surface during early stages of bone healing. Removal torque values of the modSLA‐surfaced implants were 8–21% higher than those of the SLA implants (p = 0.003). The mean removal torque values for the modSLA implants were 1.485 N m at 2 weeks, 1.709 N m at 4 weeks, and 1.345 N m at 8 weeks; and correspondingly, 1.231 N m, 1.585 N m, and 1.143 N m for the SLA implants. The bone–implant interfacial stiffness calculated from the torque–rotation curve was on average 9–14% higher for the modSLA implants when compared with the SLA implants (p = 0.038). It can be concluded that the modSLA surface achieves a better bone anchorage during early stages of bone healing than the SLA surface; chemical modification of the standard SLA surface likely enhances bone apposition and this has a beneficial effect on the interfacial shear strength. © 2006 Wiley Periodicals, Inc. J Biomed Mater Res, 2006
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Keselowsky, B. G., Collard, D. M., & García, A. J. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10537 · Cited by 949
Cited by
Impact of Dental Implant Surface Modifications on Osseointegration
Smeets, R., Stadlinger, B., Schwarz, F., Beck-Broichsitter, B., Jung, O., Precht, C., Kloss, F., Gröbe, A., Heiland, M., & Ebker, T. (2016) · BioMed Research International · doi:10.1155/2016/6285620 · Cited by 701
Effects of implant surface coatings and composition on bone integration: a systematic review
Junker, R., Dimakis, A., Thoneick, M., & Jansen, J. A. (2009) · Clinical Oral Implants Research · doi:10.1111/j.1600-0501.2009.01777.x · Cited by 535
Gittens, R. A., Olivares-Navarrete, R., Cheng, A., Anderson, D. M., McLachlan, T., Stephan, I., Geis-Gerstorfer, J., Sandhage, K. H., Fedorov, A. G., Rupp, F., et al. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.12.002 · Cited by 301
Self-citationWall, I., Donos, N., Carlqvist, K., Jones, F., & Brett, P. (2009) · Bone · doi:10.1016/j.bone.2009.03.662 · Cited by 287
Zhang, X. Z., Leary, M., Tang, H. P., Song, T., & Qian, M. (2018) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2018.05.002 · Cited by 285
Metadata
- Authors
- Ferguson, S. J., Broggini, N., Wieland, M., de Wild, M., Rupp, F., Geis‐Gerstorfer, J., Cochran, D. L., & Buser, D.
- Venue
- Journal of Biomedical Materials Research Part A
- Publisher
- Wiley
- Published
- 2006-04-24
- Volume
- 78A
- Issue
- 2
- Pages
- 291-297
- ISSN
- 1549-3296 (ISSN-L)
- 1552-4965
- OpenAlex
- W2060994483
- Cited by
- 202
- References
- 1
- FWCI
- 13.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Biomechanical evaluation of the interfacial strength of a chemically modified sandblasted and acid‐etched titanium surface. https://app.cochat.ai/papers/10.1002/jbm.a.30678
- The paper
- Ferguson, S. J., Broggini, N., Wieland, M., de Wild, M., Rupp, F., Geis‐Gerstorfer, J., Cochran, D. L., & Buser, D. (2006). Biomechanical evaluation of the interfacial strength of a chemically modified sandblasted and acid‐etched titanium surface. Journal of Biomedical Materials Research Part A. https://doi.org/10.1002/jbm.a.30678
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.