The DOI matches its Crossref record.
Mechanical properties of calcium phosphate scaffolds fabricated by robocasting
Abstract
The mechanical behavior under compressive stresses of β‐tricalcium phosphate (β‐TCP) and hydroxyapatite (HA) scaffolds fabricated by direct‐write assembly (robocasting) technique is analyzed. Concentrated colloidal inks prepared from β‐TCP and HA commercial powders were used to fabricate porous structures consisting of a 3‐D tetragonal mesh of interpenetrating ceramic rods. The compressive strength and elastic modulus of these model scaffolds were determined by uniaxial testing to compare the relative performance of the selected materials. The effect of a 3‐week immersion in simulated body fluid (SBF) on the strength of the scaffolds was also analyzed. The results are compared with those reported in the literature for calcium phosphate scaffolds and human bone. The robocast calcium phosphate scaffolds were found to exhibit excellent mechanical performances in terms of strength, especially the HA structures after SBF immersion, indicating a great potential of this type of scaffolds for use in load‐bearing bone tissue engineering applications. © 2007 Wiley Periodicals, Inc. J Biomed Mater Res 2008
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
3D printing of ceramics: A review
Chen, Z., Li, Z., Li, J., Liu, C., Lao, C., Fu, Y., Liu, C., Li, Y., Wang, P., & He, Y. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.11.013 · Cited by 2,109
Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities
Zocca, A., Colombo, P., Gomes, C. M., & Günster, J. (2015) · Journal of the American Ceramic Society · doi:10.1111/jace.13700 · Cited by 1,115
Designing Biomaterials for 3D Printing
Guvendiren, M., Molde, J., Soares, R. M. D., & Kohn, J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00121 · Cited by 732
Lin, K.-F., He, S., Song, Y., Wang, C.-M., Gao, Y., Li, J.-Q., Tang, P., Wang, Z., Bi, L., & Pei, G.-X. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00815 · Cited by 176
Metadata
- Authors
- Miranda, P., Pajares, A., Saiz, E., Tomsia, A. P., & Guiberteau, F.
- Venue
- Journal of Biomedical Materials Research Part A
- Publisher
- Wiley
- Published
- 2007-08-09
- Volume
- 85A
- Issue
- 1
- Pages
- 218-227
- ISSN
- 1549-3296 (ISSN-L)
- 1552-4965
- OpenAlex
- W2152082639
- Cited by
- 301
- References
- 0
- FWCI
- 3.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mechanical properties of calcium phosphate scaffolds fabricated by robocasting. https://app.cochat.ai/papers/10.1002/jbm.a.31587
- The paper
- Miranda, P., Pajares, A., Saiz, E., Tomsia, A. P., & Guiberteau, F. (2008). Mechanical properties of calcium phosphate scaffolds fabricated by robocasting. Journal of Biomedical Materials Research Part A. https://doi.org/10.1002/jbm.a.31587
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
