The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Mechanical properties of calcium phosphate scaffolds fabricated by robocasting
Abstract
The mechanical behavior under compressive stresses of β‐tricalcium phosphate (β‐TCP) and hydroxyapatite (HA) scaffolds fabricated by direct‐write assembly (robocasting) technique is analyzed. Concentrated colloidal inks prepared from β‐TCP and HA commercial powders were used to fabricate porous structures consisting of a 3‐D tetragonal mesh of interpenetrating ceramic rods. The compressive strength and elastic modulus of these model scaffolds were determined by uniaxial testing to compare the relative performance of the selected materials. The effect of a 3‐week immersion in simulated body fluid (SBF) on the strength of the scaffolds was also analyzed. The results are compared with those reported in the literature for calcium phosphate scaffolds and human bone. The robocast calcium phosphate scaffolds were found to exhibit excellent mechanical performances in terms of strength, especially the HA structures after SBF immersion, indicating a great potential of this type of scaffolds for use in load‐bearing bone tissue engineering applications. © 2007 Wiley Periodicals, Inc. J Biomed Mater Res 2008
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Statistical Distribution Function of Wide Applicability
Weibull, W. (1951) · Journal of Applied Mechanics · doi:10.1115/1.4010337 · Cited by 11,604
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Porous scaffold design for tissue engineering
Hollister, S. J. (2005) · Nature Materials · doi:10.1038/nmat1421 · Cited by 3,969
Department of Materials, U. O. O., Sachlos, E., & Czernuszka, J. (2003) · European Cells and Materials · doi:10.22203/ecm.v005a03 · Cited by 1,303
Mechanism of apatite formation on CaO SiO2P2O5 glasses in a simulated body fluid
Ohtsuki, C., Kokubo, T., & Yamamuro, T. (1992) · Journal of Non-Crystalline Solids · doi:10.1016/s0022-3093(05)80556-3 · Cited by 879
Freeze casting of hydroxyapatite scaffolds for bone tissue engineering
Deville, S., Saiz, E., & Tomsia, A. P. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.06.028 · Cited by 873
Self-citationWoodard, J. R., Hilldore, A. J., Lan, S. K., Park, C. J., Morgan, A. W., Eurell, J. A. C., Clark, S. G., Wheeler, M. B., Jamison, R. D., & Wagoner Johnson, A. J. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.08.021 · Cited by 829
Colloidal Inks for Directed Assembly of 3-D Periodic Structures
Smay, J. E., Cesarano, J., & Lewis, J. A. (2002) · Langmuir · doi:10.1021/la0257135 · Cited by 700
Predicting the compressive mechanical behavior of bone
Keller, T. S. (1994) · Journal of Biomechanics · doi:10.1016/0021-9290(94)90056-6 · Cited by 667
Biodegradation behavior of various calcium phosphate materials in bone tissue
Klein, C. P. A. T., Driessen, A. A., de Groot, K., & van den Hooff, A. (1983) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820170505 · Cited by 584
Cited by
3D printing of ceramics: A review
Chen, Z., Li, Z., Li, J., Liu, C., Lao, C., Fu, Y., Liu, C., Li, Y., Wang, P., & He, Y. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.11.013 · Cited by 2,109
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
A review on 3D micro-additive manufacturing technologies
Vaezi, M., Seitz, H., & Yang, S. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4605-2 · Cited by 1,293
Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities
Zocca, A., Colombo, P., Gomes, C. M., & Günster, J. (2015) · Journal of the American Ceramic Society · doi:10.1111/jace.13700 · Cited by 1,115
Additive Manufacturing of Ceramic‐Based Materials
Travitzky, N., Bonet, A., Dermeik, B., Fey, T., Filbert‐Demut, I., Schlier, L., Schlordt, T., & Greil, P. (2014) · Advanced Engineering Materials · doi:10.1002/adem.201400097 · Cited by 878
Designing Biomaterials for 3D Printing
Guvendiren, M., Molde, J., Soares, R. M. D., & Kohn, J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00121 · Cited by 732
Bioactive glass scaffolds for bone tissue engineering: state of the art and future perspectives
Fu, Q., Saiz, E., Rahaman, M. N., & Tomsia, A. P. (2011) · Materials Science and Engineering: C · doi:10.1016/j.msec.2011.04.022 · Cited by 703
Self-citationWagoner Johnson, A. J., & Herschler, B. A. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.07.012 · Cited by 635
Current state of fabrication technologies and materials for bone tissue engineering
Wubneh, A., Tsekoura, E. K., Ayranci, C., & Uludağ, H. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.09.031 · Cited by 584
Butscher, A., Bohner, M., Hofmann, S., Gauckler, L., & Müller, R. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.09.039 · Cited by 459
Rheological characterisation of ceramic inks for 3D direct ink writing: A review
del-Mazo-Barbara, L., & Ginebra, M.-P. (2021) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2021.08.031 · Cited by 444
Additive manufacturing techniques for the production of tissue engineering constructs
Mota, C., Puppi, D., Chiellini, F., & Chiellini, E. (2015) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1635 · Cited by 382
Roohani-Esfahani, S.-I., Newman, P., & Zreiqat, H. (2016) · Scientific Reports · doi:10.1038/srep19468 · Cited by 380
Robocasting of structural ceramic parts with hydrogel inks
Feilden, E., Blanca, E. G.-T., Giuliani, F., Saiz, E., & Vandeperre, L. (2016) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2016.03.001 · Cited by 378
Self-citationShahzad, A., & Lazoglu, I. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109249 · Cited by 372
Wu, C., Luo, Y., Cuniberti, G., Xiao, Y., & Gelinsky, M. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.03.009 · Cited by 363
Wu, C., & Chang, J. (2012) · Interface Focus · doi:10.1098/rsfs.2011.0121 · Cited by 359
Kaur, G., Kumar, V., Baino, F., Mauro, J. C., Pickrell, G., Evans, I., & Bretcanu, O. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.109895 · Cited by 330
In vitro and in vivo evaluation of akermanite bioceramics for bone regeneration
Huang, Y., Jin, X., Zhang, X., Sun, H., Tu, J., Tang, T., Chang, J., & Dai, K. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.05.077 · Cited by 327
3D printing of ceramic-based scaffolds for bone tissue engineering: an overview
Du, X., Fu, S., & Zhu, Y. (2018) · Journal of Materials Chemistry B · doi:10.1039/c8tb00677f · Cited by 259
Lin, K.-F., He, S., Song, Y., Wang, C.-M., Gao, Y., Li, J.-Q., Tang, P., Wang, Z., Bi, L., & Pei, G.-X. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00815 · Cited by 176
Metadata
- Authors
- Miranda, P., Pajares, A., Saiz, E., Tomsia, A. P., & Guiberteau, F.
- Venue
- Journal of Biomedical Materials Research Part A
- Publisher
- Wiley
- Published
- 2007-08-09
- Volume
- 85A
- Issue
- 1
- Pages
- 218-227
- ISSN
- 1549-3296 (ISSN-L)
- 1552-4965
- OpenAlex
- W2152082639
- Cited by
- 301
- References
- 44
- FWCI
- 3.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.