The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Characterization of printed PLA scaffolds for bone tissue engineering
Abstract
Autografts remain the gold standard for orthopedic transplantations. However, to overcome its limitations, bone tissue engineering proposes new strategies. This includes the development of new biomaterials such as synthetic polymers, to serve as scaffold for tissue production. The objective of this present study was to produce poly(lactic) acid (PLA) scaffolds of different pore size using fused deposition modeling (FDM) technique and to evaluate their physicochemical and biological properties. Structural, chemical, mechanical, and biological characterizations were performed. We successfully fabricated scaffolds of three different pore sizes. However, the pore dimensions were slightly smaller than expected. We found that the 3D printing process induced decreases in both, PLA molecular weight and degradation temperatures, but did not change the semicrystalline structure of the polymer. We did not observe any effect of pore size on the mechanical properties of produced scaffolds. After the sterilization by γ irradiation, scaffolds did not exhibit any cytotoxicity towards human bone marrow stromal cells (HBMSC). Finally, after three and seven days of culture, HBMSC showed high viability and homogenous distribution irrespective of pore size. Thus, these results suggest that FDM technology is a fast and reproducible technique that can be used to fabricate tridimensional custom‐made scaffolds for tissue engineering. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 887–894, 2018.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Recent advances in 3D printing of biomaterials
Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734
An Overview of Poly(lactic-co-glycolic) Acid (PLGA)-Based Biomaterials for Bone Tissue Engineering
Gentile, P., Chiono, V., Carmagnola, I., & Hatton, P. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms15033640 · Cited by 1,593
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
Polylactic acid (PLA) controlled delivery carriers for biomedical applications
Tyler, B., Gullotti, D., Mangraviti, A., Utsuki, T., & Brem, H. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.018 · Cited by 1,050
Properties and medical applications of polylactic acid: A review
Hamad, K., Kaseem, M., Yang, H. W., Deri, F., & Ko, Y. G. (2015) · Express Polymer Letters · doi:10.3144/expresspolymlett.2015.42 · Cited by 722
Mechanical properties and shape memory effect of 3D-printed PLA-based porous scaffolds
Senatov, F. S., Niaza, K. V., Zadorozhnyy, M. Y., Maksimkin, A. V., Kaloshkin, S. D., & Estrin, Y. Z. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.11.036 · Cited by 547
Design and properties of 3D scaffolds for bone tissue engineering
Gómez, S., Vlad, M. D., López, J., & Fernández, E. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.06.032 · Cited by 477
Chen, Q., Mangadlao, J. D., Wallat, J., De Leon, A., Pokorski, J. K., & Advincula, R. C. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11793 · Cited by 415
Wiria, F. E., Leong, K. F., Chua, C. K., & Liu, Y. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2006.07.008 · Cited by 405
Cited by
Materials design for bone-tissue engineering
Koons, G. L., Diba, M., & Mikos, A. G. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0204-2 · Cited by 1,699
Three-dimensional (3D) printed scaffold and material selection for bone repair
Zhang, L., Yang, G., Johnson, B. N., & Jia, X. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.11.039 · Cited by 865
3D printing of bone tissue engineering scaffolds
Wang, C., Huang, W., Zhou, Y., He, L., He, Z., Chen, Z., He, X., Tian, S., Liao, J., Lu, B., et al. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.01.004 · Cited by 661
Current state of fabrication technologies and materials for bone tissue engineering
Wubneh, A., Tsekoura, E. K., Ayranci, C., & Uludağ, H. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.09.031 · Cited by 584
Current applications of poly(lactic acid) composites in tissue engineering and drug delivery
Liu, S., Qin, S., He, M., Zhou, D., Qin, Q., & Wang, H. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108238 · Cited by 533
Metadata
- Authors
- Grémare, A., Guduric, V., Bareille, R., Heroguez, V., Latour, S., L'heureux, N., Fricain, J., Catros, S., & Le Nihouannen, D.
- Venue
- Journal of Biomedical Materials Research Part A
- Publisher
- Wiley
- Published
- 2017-11-20
- Volume
- 106
- Issue
- 4
- Pages
- 887-894
- ISSN
- 1549-3296 (ISSN-L)
- 1552-4965
- OpenAlex
- W2767857660
- Cited by
- 362
- References
- 32
- FWCI
- 10.71
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Characterization of printed PLA scaffolds for bone tissue engineering. https://app.cochat.ai/papers/10.1002/jbm.a.36289
- The paper
- Grémare, A., Guduric, V., Bareille, R., Heroguez, V., Latour, S., L'heureux, N., Fricain, J., Catros, S., & Le Nihouannen, D. (2018). Characterization of printed PLA scaffolds for bone tissue engineering. Journal of Biomedical Materials Research Part A. https://doi.org/10.1002/jbm.a.36289
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.