CoChat

Recent advances in 3D printing of biomaterials

Open access
Chia, Helena N, Wu, Benjamin M · 2015 · Journal of Biological Engineering

The DOI matches its Crossref record; 130 of the 130 references it cites were found in a registry or an index.

Abstract

3D Printing promises to produce complex biomedical devices according to computer design using patient-specific anatomical data. Since its initial use as pre-surgical visualization models and tooling molds, 3D Printing has slowly evolved to create one-of-a-kind devices, implants, scaffolds for tissue engineering, diagnostic platforms, and drug delivery systems. Fueled by the recent explosion in public interest and access to affordable printers, there is renewed interest to combine stem cells with custom 3D scaffolds for personalized regenerative medicine. Before 3D Printing can be used routinely for the regeneration of complex tissues (e.g. bone, cartilage, muscles, vessels, nerves in the craniomaxillofacial complex), and complex organs with intricate 3D microarchitecture (e.g. liver, lymphoid organs), several technological limitations must be addressed. In this review, the major materials and technology advances within the last five years for each of the common 3D Printing technologies (Three Dimensional Printing, Fused Deposition Modeling, Selective Laser Sintering, Stereolithography, and 3D Plotting/Direct-Write/Bioprinting) are described. Examples are highlighted to illustrate progress of each technology in tissue engineering, and key limitations are identified to motivate future research and advance this fascinating field of advanced manufacturing.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1186/s13036-015-0001-4

Cites

130 of 130 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 3D Printing schematic. 3D printing is a layer-by-layer process of depositing liquid binder onto thin layers of powder to create a 3D object. Reproduced with permission from [11].
Figure 1 3D Printing schematic. 3D printing is a layer-by-layer process of depositing liquid binder onto thin layers of powder to create a 3D object. Reproduced with permission from [11].CC BY · PubMed Central
Figure 2 PLGA scaffold with villi-shaped pillars created from indirect 3D Printing. Scaffolds are created by packing a 3D printed mold with porogen and polymer dissolved in solvent by indirect 3DP. The resulting scaffolds have the desired villi-shaped pillars (a) and high porosity and interconnectivity (b). Reproduced with permission from [17].
Figure 2 PLGA scaffold with villi-shaped pillars created from indirect 3D Printing. Scaffolds are created by packing a 3D printed mold with porogen and polymer dissolved in solvent by indirect 3DP. The resulting scaffolds have the desired villi-shaped pillars (a) and high porosity and interconnectivity (b). Reproduced with permission from [17].CC BY · PubMed Central
Figure 3 3D printed scaffolds can be patient-specific. A zygoma was generated from CT 2D images (a,b) and zygoma-shaped scaffold was produced from indirect 3DP (c). Reproduced with permission from [17].
Figure 3 3D printed scaffolds can be patient-specific. A zygoma was generated from CT 2D images (a,b) and zygoma-shaped scaffold was produced from indirect 3DP (c). Reproduced with permission from [17].CC BY · PubMed Central
Figure 4 Fused deposition modeling schematic. In fused deposition modeling, a filament of thermoplastic is heated into liquid and extruded through a nozzle in a specific lay-down pattern to create a scaffold. Reprinted with permission from [39].
Figure 4 Fused deposition modeling schematic. In fused deposition modeling, a filament of thermoplastic is heated into liquid and extruded through a nozzle in a specific lay-down pattern to create a scaffold. Reprinted with permission from [39].CC BY · PubMed Central
Figure 5 Stereolithography schematic. Stereolithography is the polymerization of photocurable resin by a bottom-up system with scanning laser (left) or top-down setup with digital light projection (right). Reproduced with permission [59].
Figure 5 Stereolithography schematic. Stereolithography is the polymerization of photocurable resin by a bottom-up system with scanning laser (left) or top-down setup with digital light projection (right). Reproduced with permission [59].CC BY · PubMed Central
Figure 6 Selective laser sintering schematic. Selective laser sintering uses a laser to fuse together powder particles to create a 3D scaffold. Thin layers of powder are spread between each fused layer. Reprinted with permission from [83].
Figure 6 Selective laser sintering schematic. Selective laser sintering uses a laser to fuse together powder particles to create a 3D scaffold. Thin layers of powder are spread between each fused layer. Reprinted with permission from [83].CC BY · PubMed Central
Figure 7 Bioprinting schematic. In bioprinting, small balls of bioink composed of cells and hydrogel materials (e.g. alginate or decellularized extracellular matrix) are printed in a desired shape. Reproduced with permission from [11].
Figure 7 Bioprinting schematic. In bioprinting, small balls of bioink composed of cells and hydrogel materials (e.g. alginate or decellularized extracellular matrix) are printed in a desired shape. Reproduced with permission from [11].CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

1 retracted

Show all 130 references

Research works printed but not linked: 1

  1. Dowler C. Automatic model building cuts design time, costs. Plastics Eng. 1989;45:43–5.

Cited by

See all 1,734

Metadata

Authors
Chia, H. N., & Wu, B. M.
Affiliations
University of California, Los Angeles (US)
Corresponding author
Wu, Benjamin M
Venue
Journal of Biological Engineering
Published
2015-03-01
Volume
9
Issue
1
Pages
4-4
ISSN
1754-1611 (ISSN-L)
OpenAlex
W2172143926
Cited by
1,734
References
127
Citations by year
2026: 63 · 2025: 117 · 2024: 123 · 2023: 153 · 2022: 154 · 2021: 192 · 2020: 213 · 2019: 205 · 2018: 227 · 2017: 165 · 2016: 95 · 2015: 25
FWCI
84.79
Type
journal article
Language
en
Open access
Locations
  • Journal of Biological Engineering (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • eScholarship (California Digital Library) (submittedVersion)
  • eScholarship (California Digital Library) (submittedVersion, cc-by)
Topics
  • Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
  • Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
  • Physical Sciences › Engineering › Biomedical Engineering › Anatomy and Medical Technology
Keywords
3D printing, biomaterials, bioprinting, tissue engineering scaffolds, patient-specific implants, stem cell scaffolds, regenerative medicine, fused deposition modeling, selective laser sintering, stereolithography, 3D plotting, organ regeneration, 3D printing materials

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Recent advances in 3D printing of biomaterials. https://app.cochat.ai/papers/10.1186/s13036-015-0001-4
The paper
Chia, H. N., & Wu, B. M. (2015). Recent advances in 3D printing of biomaterials. Journal of Biological Engineering. https://doi.org/10.1186/s13036-015-0001-4

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.