The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Novel fabricated matrix via electrospinning for tissue engineering
Abstract
Electric field‐driven fiber formation (electrospinning) is developing into a practical means for preparing novel porous filament with unusual structures and affordable mechanical properties. Polycaprolactone (PCL) was dissolved in solvent mixtures of methylene chloride/N,N‐dimethyl formamide with ratios of 100/0, 75/25, and 50/50 (v/v) for electrospinning. The filament was formed by coagulation of the spinning solution following the well‐known principle of phase separation in polymer solutions valid in other wet shaping processes. A strand of electrospun porous filament consisted of fibers ranging from 0.5 to 12 μm in diameter. To evaluate the feasibility of three‐dimensional fabric as scaffold matrices, the plain weave, which is the simplest of the weaves and the most common, was prepared with porous PCL filament. The growth characteristics of MCF‐7 mammary carcinoma cells in the woven fabrics showed the important role of matrix microstructure in proliferation. This study has shown that woven fabrics, consisting of porous filaments via electrospinning, may be suitable candidates as tissue engineering scaffolds. © 2004 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 72B: 117–124, 2005
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Langer, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893
Current protocols in molecular biology
Sargent, T. (1988) · Analytical Biochemistry · doi:10.1016/0003-2697(88)90147-9 · Cited by 7,205
Beaded nanofibers formed during electrospinning
Fong, H., Chun, I., & Reneker, D. H. (1999) · Polymer · doi:10.1016/s0032-3861(99)00068-3 · Cited by 2,553
Functional Arteries Grown in Vitro
Niklason, L. E., Gao, J., Abbott, W. M., Hirschi, K. K., Houser, S., Marini, R., & Langer, R. (1999) · Science · doi:10.1126/science.284.5413.489 · Cited by 1,766
Porous chitosan scaffolds for tissue engineering
Madihally, S. V., & Matthew, H. W. T. (1999) · Biomaterials · doi:10.1016/s0142-9612(99)00011-3 · Cited by 1,583
COLLAGEN SUBSTRATA FOR STUDIES ON CELL BEHAVIOR
Elsdale, T., & Bard, J. (1972) · The Journal of Cell Biology · doi:10.1083/jcb.54.3.626 · Cited by 1,525
Preparation and characterization of poly(l-lactic acid) foams
Mikos, A. G., Thorsen, A. J., Czerwonka, L. A., Bao, Y., Langer, R., Winslow, D. N., & Vacanti, J. P. (1994) · Polymer · doi:10.1016/0032-3861(94)90953-9 · Cited by 1,187
Yannas, I. V., Lee, E., Orgill, D. P., Skrabut, E. M., & Murphy, G. F. (1989) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.86.3.933 · Cited by 972
De novo reconstitution of a functional mammalian urinary bladder by tissue engineering
Oberpenning, F., Meng, J., Yoo, J. J., & Atala, A. (1999) · Nature Biotechnology · doi:10.1038/6146 · Cited by 800
Artificial Dermis for Major Burns: A Multi-Center Randomized Clinical Trial
HEIMBACH, D., LUTERMAN, A., BURKE, J., CRAM, A., HERNDON, D., HUNT, J., JORDAN, M., McMANUS, W., SOLEM, L., WARDEN, G., et al. (1988) · Annals of Surgery · doi:10.1097/00000658-198809000-00008 · Cited by 683
A novel method to fabricate bioabsorbable scaffolds
Whang, K., Thomas, C. H., Healy, K. E., & Nuber, G. (1995) · Polymer · doi:10.1016/0032-3861(95)93115-3 · Cited by 639
Fabrication of porous gelatin scaffolds for tissue engineering
Kang, H.-W., Tabata, Y., & Ikada, Y. (1999) · Biomaterials · doi:10.1016/s0142-9612(99)00036-8 · Cited by 622
Characterization of nano-structured poly(ε-caprolactone) nonwoven mats via electrospinning
Lee, K. H., Kim, H. Y., Khil, M. S., Ra, Y. M., & Lee, D. R. (2003) · Polymer · doi:10.1016/s0032-3861(02)00820-0 · Cited by 586
Self-citationMatrix collagen type and pore size influence behaviour of seeded canine chondrocytes
Nehrer, S., Breinan, H. A., Ramappa, A., Young, G., Shortkroff, S., Louie, L. K., Sledge, C. B., Yannas, I. V., & Spector, M. (1997) · Biomaterials · doi:10.1016/s0142-9612(97)00001-x · Cited by 398
Tissue Engineering: From Biology to Biological Substitutes
Nerem, R. M., & Sambanis, A. (1995) · Tissue Engineering · doi:10.1089/ten.1995.1.3 · Cited by 351
Aigner, J., Tegeler, J., Hutzler, P., Campoccia, D., Pavesio, A., Hammer, C., Kastenbauer, E., & Naumann, A. (1998) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199811)42:2<172::aid-jbm2>3.0.co;2-m · Cited by 313
Tissue-engineered heart valves. Autologous valve leaflet replacement study in a lamb model.
Shinoka, T., Ma, P. X., Shum‐Tim, D., Breuer, C. K., Cusick, R. A., Zünd, G., Langer, R., Vacanti, J. P., & Mayer, J. E. (1996) · PubMed · Cited by 246
The Importance of New Processing Techniques in Tissue Engineering
Lu, L., & Mikos, A. G. (1996) · MRS Bulletin · doi:10.1557/s088376940003181x · Cited by 244
Nanofiber garlands of polycaprolactone by electrospinning
Reneker, D. H., Kataphinan, W., Theron, A., Zussman, E., & Yarin, A. L. (2002) · Polymer · doi:10.1016/s0032-3861(02)00595-5 · Cited by 239
Bone And Cartilage Reconstruction With Tissue Engineering Approaches
Vacanti, C. A., & Vacanti, J. P. (1994) · Otolaryngologic Clinics of North America · doi:10.1016/s0030-6665(20)30727-1 · Cited by 148
Development of biomechanical properties and morphogenesis of in vitro tissue engineered cartilage
Ma, P. X., Schloo, B. L., Mooney, D. J., et al. (1995) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820291215 · Cited by 127
Tissue regeneration by use of collagen-glycosaminoglycan copolymers
Yannas, I. V. (1992) · Clinical Materials · doi:10.1016/0267-6605(92)90098-e · Cited by 120
Tissue Engineering Methods and Protocols
Katenkamp, D. (2000) · Experimental and Toxicologic Pathology · doi:10.1016/s0940-2993(00)80082-2 · Cited by 115
Fabrication of Biodegradable Polymer Foams for Cell Transplantation and Tissue Engineering
Ma, P. X., & Langer, R. (2003) · Humana Press eBooks · doi:10.1385/0-89603-516-6:47 · Cited by 112
Recipes for Reconstituting Skin
Bell, E., Rosenberg, M., Kemp, P. D., Gay, R., Green, G., Muthukumaran, N., & Nolte, C. J. M. (1991) · Journal of Biomechanical Engineering · doi:10.1115/1.2891224 · Cited by 98
Porous collagen sponge for esophageal replacement
Natsume, T., Ike, O., Okada, T., Takimoto, N., Shimizu, Y., & Ikada, Y. (1993) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820270705 · Cited by 74
Polymers in medicine and pharmacy
Brannon‐Peppas, L. (1996) · Journal of Controlled Release · doi:10.1016/0168-3659(96)01460-5 · Cited by 56
Two parameters account for the flocculated growth of microbes in biodegradation assays
Brandt, B. W., & Kooijman, S. A. L. M. (2000) · Biotechnology and Bioengineering · doi:10.1002/1097-0290(20001220)70:6<606::aid-bit2>3.0.co;2-h · Cited by 18
Cited by
Electrospinning: A Fascinating Method for the Preparation of Ultrathin Fibers
Greiner, A., & Wendorff, J. H. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200604646 · Cited by 4,241
A review on electrospinning design and nanofibre assemblies
Teo, W. E., & Ramakrishna, S. (2006) · Nanotechnology · doi:10.1088/0957-4484/17/14/r01 · Cited by 2,289
Nanofibers and their applications in tissue engineering
Vasita, R., & Katti, D. S. (2006) · International Journal of Nanomedicine · doi:10.2147/nano.2006.1.1.15 · Cited by 988
Functional electrospun nanofibrous scaffolds for biomedical applications
Liang, D., Hsiao, B. S., & Chu, B. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.04.021 · Cited by 972
One‐Dimensional Composite Nanomaterials: Synthesis by Electrospinning and Their Applications
Lu, X., Wang, C., & Wei, Y. (2009) · Small · doi:10.1002/smll.200900445 · Cited by 874
Metadata
- Authors
- Khil, M., Bhattarai, S. R., Kim, H., Kim, S., & Lee, K.
- Venue
- Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Publisher
- Wiley
- Published
- 2004-08-27
- Volume
- 72B
- Issue
- 1
- Pages
- 117-124
- ISSN
- 1552-4973 (ISSN-L)
- 1552-4981
- OpenAlex
- W2092642103
- Cited by
- 271
- References
- 28
- FWCI
- 8.66
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.