The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Novel fabricated matrix via electrospinning for tissue engineering
Abstract
Electric field‐driven fiber formation (electrospinning) is developing into a practical means for preparing novel porous filament with unusual structures and affordable mechanical properties. Polycaprolactone (PCL) was dissolved in solvent mixtures of methylene chloride/N,N‐dimethyl formamide with ratios of 100/0, 75/25, and 50/50 (v/v) for electrospinning. The filament was formed by coagulation of the spinning solution following the well‐known principle of phase separation in polymer solutions valid in other wet shaping processes. A strand of electrospun porous filament consisted of fibers ranging from 0.5 to 12 μm in diameter. To evaluate the feasibility of three‐dimensional fabric as scaffold matrices, the plain weave, which is the simplest of the weaves and the most common, was prepared with porous PCL filament. The growth characteristics of MCF‐7 mammary carcinoma cells in the woven fabrics showed the important role of matrix microstructure in proliferation. This study has shown that woven fabrics, consisting of porous filaments via electrospinning, may be suitable candidates as tissue engineering scaffolds. © 2004 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 72B: 117–124, 2005
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Langer, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893
Current protocols in molecular biology
Sargent, T. (1988) · Analytical Biochemistry · doi:10.1016/0003-2697(88)90147-9 · Cited by 7,205
Beaded nanofibers formed during electrospinning
Fong, H., Chun, I., & Reneker, D. H. (1999) · Polymer · doi:10.1016/s0032-3861(99)00068-3 · Cited by 2,553
Functional Arteries Grown in Vitro
Niklason, L. E., Gao, J., Abbott, W. M., Hirschi, K. K., Houser, S., Marini, R., & Langer, R. (1999) · Science · doi:10.1126/science.284.5413.489 · Cited by 1,766
Porous chitosan scaffolds for tissue engineering
Madihally, S. V., & Matthew, H. W. T. (1999) · Biomaterials · doi:10.1016/s0142-9612(99)00011-3 · Cited by 1,583
COLLAGEN SUBSTRATA FOR STUDIES ON CELL BEHAVIOR
Elsdale, T., & Bard, J. (1972) · The Journal of Cell Biology · doi:10.1083/jcb.54.3.626 · Cited by 1,525
Preparation and characterization of poly(l-lactic acid) foams
Mikos, A. G., Thorsen, A. J., Czerwonka, L. A., Bao, Y., Langer, R., Winslow, D. N., & Vacanti, J. P. (1994) · Polymer · doi:10.1016/0032-3861(94)90953-9 · Cited by 1,187
Yannas, I. V., Lee, E., Orgill, D. P., Skrabut, E. M., & Murphy, G. F. (1989) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.86.3.933 · Cited by 972
De novo reconstitution of a functional mammalian urinary bladder by tissue engineering
Oberpenning, F., Meng, J., Yoo, J. J., & Atala, A. (1999) · Nature Biotechnology · doi:10.1038/6146 · Cited by 800
Artificial Dermis for Major Burns: A Multi-Center Randomized Clinical Trial
HEIMBACH, D., LUTERMAN, A., BURKE, J., CRAM, A., HERNDON, D., HUNT, J., JORDAN, M., McMANUS, W., SOLEM, L., WARDEN, G., et al. (1988) · Annals of Surgery · doi:10.1097/00000658-198809000-00008 · Cited by 683
Cited by
Electrospinning: A Fascinating Method for the Preparation of Ultrathin Fibers
Greiner, A., & Wendorff, J. H. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200604646 · Cited by 4,241
A review on electrospinning design and nanofibre assemblies
Teo, W. E., & Ramakrishna, S. (2006) · Nanotechnology · doi:10.1088/0957-4484/17/14/r01 · Cited by 2,289
Nanofibers and their applications in tissue engineering
Vasita, R., & Katti, D. S. (2006) · International Journal of Nanomedicine · doi:10.2147/nano.2006.1.1.15 · Cited by 988
Functional electrospun nanofibrous scaffolds for biomedical applications
Liang, D., Hsiao, B. S., & Chu, B. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.04.021 · Cited by 972
One‐Dimensional Composite Nanomaterials: Synthesis by Electrospinning and Their Applications
Lu, X., Wang, C., & Wei, Y. (2009) · Small · doi:10.1002/smll.200900445 · Cited by 874
Electrospinning polyaniline-contained gelatin nanofibers for tissue engineering applications
Li, M., Guo, Y., Wei, Y., MacDiarmid, A. G., & Lelkes, P. I. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.11.037 · Cited by 856
Advances in three-dimensional nanofibrous macrostructures via electrospinning
Sun, B., Long, Y. Z., Zhang, H. D., Li, M. M., Duvail, J. L., Jiang, X. Y., & Yin, H. L. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.06.002 · Cited by 792
One-Dimensional Titanium Dioxide Nanomaterials: Nanowires, Nanorods, and Nanobelts
Wang, X., Li, Z., Shi, J., & Yu, Y. (2014) · Chemical Reviews · doi:10.1021/cr400633s · Cited by 716
Electrospinning for tissue engineering scaffolds
Lannutti, J., Reneker, D., Ma, T., Tomasko, D., & Farson, D. (2007) · Materials Science and Engineering: C · doi:10.1016/j.msec.2006.05.019 · Cited by 693
Design and analysis of tissue engineering scaffolds that mimic soft tissue mechanical anisotropy
Courtney, T., Sacks, M. S., Stankus, J., Guan, J., & Wagner, W. R. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.02.024 · Cited by 416
Design Strategies of Tissue Engineering Scaffolds with Controlled Fiber Orientation
Murugan, R., & Ramakrishna, S. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0078 · Cited by 415
Recent Advances in Electrospun Nanofibers for Wound Healing
Chen, S., Liu, B., Carlson, M. A., Gombart, A. F., Reilly, D. A., & Xie, J. (2017) · Nanomedicine · doi:10.2217/nnm-2017-0017 · Cited by 409
Technological advances in electrospinning of nanofibers
Teo, W.-E., Inai, R., & Ramakrishna, S. (2011) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/12/1/013002 · Cited by 361
Interaction of cells and nanofiber scaffolds in tissue engineering
Venugopal, J., Low, S., Choon, A. T., & Ramakrishna, S. (2008) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30841 · Cited by 332
An improved hydrophilicity via electrospinning for enhanced cell attachment and proliferation
Kim, C. H., Khil, M. S., Kim, H. Y., Lee, H. U., & Jahng, K. Y. (2006) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30484 · Cited by 326
Self-citationThe Role of Electrospinning in the Emerging Field of Nanomedicine
Chew, S., Wen, Y., Dzenis, Y., & Leong, K. (2006) · Current Pharmaceutical Design · doi:10.2174/138161206779026326 · Cited by 277
Kim, T. G., & Park, T. G. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.221 · Cited by 272
Biomimetic electrospun nanofibers for tissue regeneration
Liao, S., Li, B., Ma, Z., Wei, H., Chan, C., & Ramakrishna, S. (2006) · Biomedical Materials · doi:10.1088/1748-6041/1/3/r01 · Cited by 266
Nanostructured Biocomposite Scaffolds Based on Collagen Coelectrospun with Nanohydroxyapatite
Thomas, V., Dean, D. R., Jose, M. V., Mathew, B., Chowdhury, S., & Vohra, Y. K. (2007) · Biomacromolecules · doi:10.1021/bm060879w · Cited by 259
Electrospinning Approaches Toward Scaffold Engineering—A Brief Overview
Boudriot, U., Dersch, R., Greiner, A., & Wendorff, J. H. (2006) · Artificial Organs · doi:10.1111/j.1525-1594.2006.00301.x · Cited by 255
Wu, S., Dong, T., Li, Y., Sun, M., Qi, Y., Liu, J., Kuss, M. A., Chen, S., & Duan, B. (2022) · Applied Materials Today · doi:10.1016/j.apmt.2022.101473 · Cited by 250
Polycaprolactone/starch composite: Fabrication, structure, properties, and applications
Ali Akbari Ghavimi, S., Ebrahimzadeh, M. H., Solati-Hashjin, M., & Abu Osman, N. A. (2015) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35371 · Cited by 151
Metadata
- Authors
- Khil, M., Bhattarai, S. R., Kim, H., Kim, S., & Lee, K.
- Venue
- Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Publisher
- Wiley
- Published
- 2004-08-27
- Volume
- 72B
- Issue
- 1
- Pages
- 117-124
- ISSN
- 1552-4973 (ISSN-L)
- 1552-4981
- OpenAlex
- W2092642103
- Cited by
- 271
- References
- 28
- FWCI
- 8.66
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.