The DOI matches its Crossref record.
Ceramic scaffolds produced by computer‐assisted 3D printing and sintering: Characterization and biocompatibility investigations
Abstract
Hydroxyapatite (HAP) and tricalcium phosphate (TCP) are two very common ceramic materials for bone replacement. However, in general HAP and TCP scaffolds are not tailored to the exact dimensions of the defect site and are mainly used as granules or beads. Some scaffolds are available as ordinary blocks, but cannot be customized for individual perfect fit. Using computer‐assisted 3D printing, an emerging rapid prototyping technique, individual three‐dimensional ceramic scaffolds can be built up from TCP or HAP powder layer by layer with subsequent sintering. These scaffolds have precise dimensions and highly defined and regular internal characteristics such as pore size. External shape and internal characteristics such as pore size can be fabricated using Computer Assisted Design (CAD) based on individual patient data. Thus, these scaffolds could be designed as perfect fit replacements to reconstruct the patient's skeleton. Before their use as bone replacement materials in vivo, in vitro testing of these scaffolds is necessary. In this study, the behavior of human osteoblasts on HAP and TCP scaffolds was investigated. The commonly used bone replacement material BioOss® served as control. Biocompatibility was assessed by scanning electron microscopy (SEM), fluorescence microscopy after staining for cell vitality with fluorescin diacetate (FDA) and propidium iodide (PI) and the MTT, LDH, and WST biocompatibility tests. Both versions were colonised by human osteoblasts, however more cells were seen on HAP scaffolds than TCP scaffolds. Cell vitality staining and MTT, LDH, and WST tests showed superior biocompatibility of HAP scaffolds to BioOss®, while BioOss® was more compatible than TCP. Further experiments are necessary to determine biocompatibility in vivo. Future modifications of 3D printed scaffolds offer advantageous features for Tissue Engineering. The integration of channels could allow for vascular and nerve ingrowth into the scaffold. Also the complex shapes of convex and concave articulating joint surfaces maybe realized with these rapid prototyping techniques. © 2010 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2010
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Bone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,866
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Recent advances in 3D printing of biomaterials
Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734
3D Printing of Scaffolds for Tissue Regeneration Applications
Do, A., Khorsand, B., Geary, S. M., & Salem, A. K. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500168 · Cited by 949
Shirazi, S. F. S., Gharehkhani, S., Mehrali, M., Yarmand, H., Metselaar, H. S. C., Adib Kadri, N., & Osman, N. A. A. (2015) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/16/3/033502 · Cited by 755
Metadata
- Authors
- Warnke, P. H., Seitz, H., Warnke, F., Becker, S. T., Sivananthan, S., Sherry, E., Liu, Q., Wiltfang, J., & Douglas, T.
- Venue
- Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Publisher
- Wiley
- Published
- 2010-01-20
- Volume
- 93B
- Issue
- 1
- Pages
- 212-217
- ISSN
- 1552-4973 (ISSN-L)
- 1552-4981
- OpenAlex
- W2017270677
- Cited by
- 192
- References
- 0
- FWCI
- 6.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Ceramic scaffolds produced by computer‐assisted 3D printing and sintering: Characterization and biocompatibility investigations. https://app.cochat.ai/papers/10.1002/jbm.b.31577
- The paper
- Warnke, P. H., Seitz, H., Warnke, F., Becker, S. T., Sivananthan, S., Sherry, E., Liu, Q., Wiltfang, J., & Douglas, T. (2010). Ceramic scaffolds produced by computer‐assisted 3D printing and sintering: Characterization and biocompatibility investigations. Journal of Biomedical Materials Research Part B: Applied Biomaterials. https://doi.org/10.1002/jbm.b.31577
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.