The DOI matches its Crossref record; 92 of the 92 references it cites were found in a registry or an index.
Production of polyhydroxyalkanoates: the future green materials of choice
Abstract
Polyhydroxyalkanoates (PHAs) have recently been the focus of attention as a biodegradable and biocompatible substitute for conventional non degradable plastics. The cost of large‐scale production of these polymers has inhibited its widespread use. Thus, economical, large‐scale production of PHAs is currently being studied intensively. Various bacterial strains, either wild‐type or recombinant have been utilized with a wide spectrum of utilizable carbon sources. New fermentation strategies have been developed for the efficient production of PHAs at high concentration and productivity. With the current advances, PHAs can now be produced to a concentration of 80 g L−1 with productivities greater than 4 g PHA L−1 h−1. These advances will further lower the production cost of PHAs and allow this family of polymers to become a leading biodegradable polymer in the near future. This review describes the properties of PHAs, their uses, the various attempts towards the production of PHAs, focusing on the utilization of cheap substrates and the development of different fermentation strategies for the production of these polymers, an essential step forward towards their widespread use. Copyright © 2010 Society of Chemical Industry
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metabolic Engineering of Poly(3-Hydroxyalkanoates): From DNA to Plastic
Madison, L. L., & Huisman, G. W. (1999) · Microbiology and Molecular Biology Reviews · doi:10.1128/mmbr.63.1.21-53.1999 · Cited by 1,600
Neocartilage formation in vitro and in vivo using cells cultured on synthetic biodegradable polymers
Freed, L. E., Marquis, J. C., Nohria, A., Emmanual, J., Mikos, A. G., & Langer, R. (1993) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820270104 · Cited by 952
Polyhydroxyalkanoates: biodegradable polymers with a range of applications
Philip, S., Keshavarz, T., & Roy, I. (2007) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.1667 · Cited by 883
Self-citationBrandl, H., Gross, R. A., Lenz, R. W., & Fuller, R. C. (1988) · Applied and Environmental Microbiology · doi:10.1128/aem.54.8.1977-1982.1988 · Cited by 869
Occurrence, synthesis and medical application of bacterial polyhydroxyalkanoate
Zinn, M., Witholt, B., & Egli, T. (2001) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00218-6 · Cited by 802
Bacterial Polyesters: Biosynthesis, Biodegradable Plastics and Biotechnology
Lenz, R. W., & Marchessault, R. H. (2005) · Biomacromolecules · doi:10.1021/bm049700c · Cited by 780
Bacterial polyhydroxyalkanoates
Lee, S. Y. (2000) · Biotechnology and Bioengineering · doi:10.1002/(sici)1097-0290(19960105)49:1<1::aid-bit1>3.0.co;2-p · Cited by 779
Bacterial synthesis of biodegradable polyhydroxyalkanoates
Verlinden, R. A. J., Hill, D. J., Kenward, M. A., Williams, C. D., & Radecka, I. (2007) · Journal of Applied Microbiology · doi:10.1111/j.1365-2672.2007.03335.x · Cited by 773
Recent advances in microbial polyhydroxyalkanoates
Khanna, S., & Srivastava, A. K. (2005) · Process Biochemistry · doi:10.1016/j.procbio.2004.01.053 · Cited by 762
Medical applications of poly-4-hydroxybutyrate: A strong flexible absorbable biomaterial
Martin, D. P., & Williams, S. F. (2003) · Biochemical Engineering Journal · doi:10.1016/s1369-703x(03)00040-8 · Cited by 510
Cited by
Webb, H., Arnott, J., Crawford, R., & Ivanova, E. (2012) · Polymers · doi:10.3390/polym5010001 · Cited by 958
A review of the production and applications of waste-derived volatile fatty acids
Lee, W. S., Chua, A. S. M., Yeoh, H. K., & Ngoh, G. C. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.09.002 · Cited by 842
Opportunities and challenges in sustainable treatment and resource reuse of sewage sludge: A review
Raheem, A., Sikarwar, V. S., He, J., Dastyar, W., Dionysiou, D. D., Wang, W., & Zhao, M. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.12.149 · Cited by 771
Polyhydroxyalkanoates: Characteristics, production, recent developments and applications
Raza, Z. A., Abid, S., & Banat, I. M. (2018) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2017.10.001 · Cited by 708
Sludge: A waste or renewable source for energy and resources recovery?
Tyagi, V. K., & Lo, S.-L. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.05.029 · Cited by 690
Elastomeric biomaterials for tissue engineering
Chen, Q., Liang, S., & Thouas, G. A. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.05.003 · Cited by 564
Nilsen‐Nygaard, J., Fernández, E. N., Radusin, T., Rotabakk, B. T., Sarfraz, J., Sharmin, N., Sivertsvik, M., Sone, I., & Pettersen, M. K. (2021) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/1541-4337.12715 · Cited by 377
Koller, M. (2018) · Molecules · doi:10.3390/molecules23020362 · Cited by 311
Design of biocomposite materials for bone tissue regeneration
Yunus Basha, R., T.S., S. K., & Doble, M. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.07.016 · Cited by 299
Bacterial polyhydroxyalkanoates: Opportunities, challenges, and prospects
Kumar, M., Rathour, R., Singh, R., Sun, Y., Pandey, A., Gnansounou, E., Andrew Lin, K.-Y., Tsang, D. C. W., & Thakur, I. S. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121500 · Cited by 255
Review of Hybrid Materials Based on Polyhydroxyalkanoates for Tissue Engineering Applications
Pryadko, A., Surmeneva, M. A., & Surmenev, R. A. (2021) · Polymers · doi:10.3390/polym13111738 · Cited by 102
Current Strategies on Algae-Based Biopolymer Production and Scale-Up
Mal, N., Satpati, G., Raghunathan, S., & Davoodbasha, M. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2021.133178 · Cited by 55
Recyclability of Poly(Hydroxybutyrate-Co-Hydroxyhexanoate) (PHBH) for Food Packaging Applications
Plouzeau, M., Belyamani, I., Fatyeyeva, K., Marais, S., Kobzar, Y., & Cauret, L. (2023) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2023.101170 · Cited by 41
Khattab, M. M., & Dahman, Y. (2019) · Bioprocess and Biosystems Engineering · doi:10.1007/s00449-019-02109-6 · Cited by 38
Industrial hemp by-product valorization
Moliterni, V. M. C., Pojić, M., & Tiwari, B. (2022) · Industrial Hemp · doi:10.1016/b978-0-323-90910-5.00007-5 · Cited by 9
Metadata
- Authors
- Akaraonye, E., Keshavarz, T., & Roy, I.
- Venue
- Journal of Chemical Technology & Biotechnology
- Publisher
- Wiley
- Published
- 2010-04-23
- Volume
- 85
- Issue
- 6
- Pages
- 732-743
- ISSN
- 0142-0356 (ISSN-L)
- 0268-2575
- 1097-4660
- OpenAlex
- W2080048966
- Cited by
- 393
- References
- 92
- FWCI
- 8.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.