The DOI matches its Crossref record.
The reactivity of calcium oxide towards carbon dioxide and its use for energy storage
Abstract
By using calcium carbonate powder of particle size ∼ 10 nm (and therefore of high surface area) it has been shown that the reaction CaCO 3 ⇄ CaO + CO 2 can be made almost wholly reversible. A reactivity of 93% was achieved, (i.e. 93% of the calcium oxide reacted with carbon dioxide) and this was maintained for 30 24‐h decomposition‐back reaction cycles at 629 °C with no detectable decrease. This material has an energy storage capacity of 200 Wh/lb, but only about 1 kWh/ft.3 When this calcium carbonate was pressed, however, to increase its bulk density (from 0.1 to ∼ 1 g/ml) there was a large decrease in its surface area and a smaller decrease in its reactivity on undergoing a few decomposition and back reaction cycles. Scaling up of the sample size from 20 mg to 10 g only had a small (× 3) effect on the rates of decomposition and back reaction.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
An overview of CO2 capture technologies
MacDowell, N., Florin, N., Buchard, A., Hallett, J., Galindo, A., Jackson, G., Adjiman, C. S., Williams, C. K., Shah, N., & Fennell, P. (2010) · Energy & Environmental Science · doi:10.1039/c004106h · Cited by 1,636
The calcium looping cycle for large-scale CO2 capture
Blamey, J., Anthony, E. J., Wang, J., & Fennell, P. S. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.10.001 · Cited by 1,044
A review on high temperature thermochemical heat energy storage
Pardo, P., Deydier, A., Anxionnaz-Minvielle, Z., Rougé, S., Cabassud, M., & Cognet, P. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.12.014 · Cited by 849
Thermal energy storage systems for concentrated solar power plants
Pelay, U., Luo, L., Fan, Y., Stitou, D., & Rood, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.03.139 · Cited by 768
Effect of the product layer on the kinetics of the CO2‐lime reaction
Bhatia, S. K., & Perlmutter, D. D. (1983) · AIChE Journal · doi:10.1002/aic.690290111 · Cited by 657
Gupta, H., & Fan, L.-S. (2002) · Industrial & Engineering Chemistry Research · doi:10.1021/ie010867l · Cited by 541
Florin, N. H., & Harris, A. T. (2008) · Chemical Engineering Science · doi:10.1016/j.ces.2007.09.011 · Cited by 482
Dunstan, M. T., Donat, F., Bork, A. H., Grey, C. P., & Müller, C. R. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00100 · Cited by 481
A critical review of high-temperature reversible thermochemical energy storage systems
Sunku Prasad, J., Muthukumar, P., Desai, F., Basu, D. N., & Rahman, M. M. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113733 · Cited by 405
Recent advances in capture of carbon dioxide using alkali-metal-based oxides
Wang, S., Yan, S., Ma, X., & Gong, J. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01116b · Cited by 382
Synthesis, Experimental Studies, and Analysis of a New Calcium-Based Carbon Dioxide Absorbent
Li, Z.-S., Cai, N.-S., Huang, Y.-Y., & Han, H.-J. (2005) · Energy & Fuels · doi:10.1021/ef0496799 · Cited by 372
CaO‐Based CO2 Sorbents: From Fundamentals to the Development of New, Highly Effective Materials
Kierzkowska, A. M., Pacciani, R., & Müller, C. R. (2013) · ChemSusChem · doi:10.1002/cssc.201300178 · Cited by 351
Achkari, O., & El Fadar, A. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114806 · Cited by 341
Shokrollahi Yancheshmeh, M., Radfarnia, H. R., & Iliuta, M. C. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.06.060 · Cited by 331
Performance Enhancement of Calcium Oxide Sorbents for Cyclic CO2 Capture—A Review
Liu, W., An, H., Qin, C., Yin, J., Wang, G., Feng, B., & Xu, M. (2012) · Energy & Fuels · doi:10.1021/ef300220x · Cited by 320
Li, Z.-S., Cai, N.-S., & Huang, Y.-Y. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie051211l · Cited by 302
CO2 capture materials: a review of current trends and future challenges
Dziejarski, B., Serafin, J., Andersson, K., & Krzyżyńska, R. (2023) · Materials Today Sustainability · doi:10.1016/j.mtsust.2023.100483 · Cited by 302
Calcium Precursors for the Production of CaO Sorbents for Multicycle CO2 Capture
Liu, W., Low, N. W., Feng, B., Wang, G., & Diniz da Costa, J. C. (2010) · Environmental Science & Technology · doi:10.1021/es902426n · Cited by 272
Metadata
- Authors
- Barker, R.
- Venue
- Journal of Applied Chemistry and Biotechnology
- Publisher
- Wiley
- Published
- 1974-04
- Volume
- 24
- Issue
- 4-5
- Pages
- 221-227
- ISSN
- 0375-9210 (ISSN-L)
- 1935-0554
- OpenAlex
- W4229755316
- Cited by
- 224
- References
- 0
- FWCI
- 1.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.