The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Finite‐element modeling of trabecular bone: Comparison with mechanical testing and determination of tissue modulus
Abstract
We combined three techniques—mechanical testing, three‐dimensional imaging, and finite‐element modeling—to distinguish between the contributions of architecture and tissue modulus to mechanical function in human trabecular bone. The objectives of this study were 2‐fold. The first was to assess the accuracy of micromechanical modeling of trabecular bone using high‐contrast x‐ray images of the trabecular architecture. The second was to combine finite‐element calculations with mechanical testing to infer an average tissue modulus for the specimen. Specimens from five human L1 vertebrae were mechanically tested along the three anatomic axes. The specimens were then imaged by synchrotron x‐ray tomography, and the elastic moduli of each specimen were calculated from the tomographic image by finite‐element modeling. We found that 23‐μm tomographic images resolved sufficient structural detail such that the calculated anisotropy in the elastic modulus was within the uncertainties of the experimental measurements in all cases. The tissue modulus of each specimen was then estimated by comparing the calculated mean stiffness of the specimen, averaged over the three anatomical directions, with the experimental measurement. The absolute values of the experimental elastic constants could be fitted, again within the uncertainties of the experimental measure‐ments, by a single tissue modulus of 6.6 GPa, which was the average tissue modulus of the five specimens. These observations suggest that a combination of mechanical testing, three‐dimensional imaging, and finite‐element modeling might enable the physiological variations in tissue moduli to be determined as a function of age and gender.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
van Rietbergen, B., Weinans, H., Huiskes, R., & Odgaard, A. (1995) · Journal of Biomechanics · doi:10.1016/0021-9290(95)80008-5 · Cited by 865
Cited by
Comparison of the elastic and yield properties of human femoral trabecular and cortical bone tissue
Bayraktar, H. H., Morgan, E. F., Niebur, G. L., Morris, G. E., Wong, E. K., & Keaveny, T. M. (2004) · Journal of Biomechanics · doi:10.1016/s0021-9290(03)00257-4 · Cited by 1,142
Biomechanics of Trabecular Bone
Keaveny, T. M., Morgan, E. F., Niebur, G. L., & Yeh, O. C. (2001) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.3.1.307 · Cited by 801
Pistoia, W., van Rietbergen, B., Lochmüller, E.-M., Lill, C. A., Eckstein, F., & Rüegsegger, P. (2002) · Bone · doi:10.1016/s8756-3282(02)00736-6 · Cited by 643
High-resolution ab initio three-dimensional x-ray diffraction microscopy
Chapman, H. N., Barty, A., Marchesini, S., Noy, A., Hau-Riege, S. P., Cui, C., Howells, M. R., Rosen, R., He, H., Spence, J. C. H., et al. (2006) · Journal of the Optical Society of America A · doi:10.1364/josaa.23.001179 · Cited by 592
Biomechanics and Mechanobiology of Trabecular Bone: A Review
Oftadeh, R., Perez-Viloria, M., Villa-Camacho, J. C., Vaziri, A., & Nazarian, A. (2015) · Journal of Biomechanical Engineering · doi:10.1115/1.4029176 · Cited by 547
Metadata
- Authors
- Ladd, A. J. C., Kinney, J. H., Haupt, D. L., & Goldstein, S. A.
- Venue
- Journal of Orthopaedic Research
- Publisher
- Wiley
- Published
- 1998-09
- Volume
- 16
- Issue
- 5
- Pages
- 622-628
- ISSN
- 0736-0266 (ISSN-L)
- 1554-527X
- OpenAlex
- W2171726833
- Cited by
- 171
- References
- 1
- FWCI
- 7.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Finite‐element modeling of trabecular bone: Comparison with mechanical testing and determination of tissue modulus. https://app.cochat.ai/papers/10.1002/jor.1100160516
- The paper
- Ladd, A. J. C., Kinney, J. H., Haupt, D. L., & Goldstein, S. A. (1998). Finite‐element modeling of trabecular bone: Comparison with mechanical testing and determination of tissue modulus. Journal of Orthopaedic Research. https://doi.org/10.1002/jor.1100160516
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.